FIELD REFERENCE / FPC & MINIATURE REPAIR
Contact side.
Not entry direction.
Read the connector, the cable and the board as three separate identities. A top-contact FPC connector and a top-entry wire-to-board header are not the same description.
01 / SEPARATE FIELD
Connector
Record the exact part and whether it is a board connector, cable housing or loose contact.
02 / SEPARATE FIELD
Contact side
Use the part-specific section or product field. Do not substitute the entry axis.
03 / SEPARATE FIELD
Both cable ends
Record exposed contacts, construction and orientation at end A and end B. A missing end remains unknown.
04 / SEPARATE FIELD
Actuator
Read the exact actuator documentation. This reference gives no generic slide, lift or pull procedure.
Compare the two FPC references → · Compare cable-side families →
CONTACT / ENTRY / ACTUATOR / TERMINATION
Six entries. No interchangeable pair implied.
| Named example | Contact location | Entry & actuator | Role, termination & source |
|---|---|---|---|
| TE top-contact assembly1-2492111-7 / 17 positionsInspect the declared view → (private workspace) | Top, per exact product page and drawing | Right-angle PCB orientation; not a top-entry header Stuffer, per product field; operation not inferred | Board receptacle for flex-to-board use Surface-mount PCB termination Evidence, date & limitsNew V128 observation. Observed . TE 1-2492111-7 product fields ↗ TE customer drawing 2492111, revision A ↗ TE design objective 108-161738, revision 1 ↗ Not established: Cable continuity, opposite connector, finished cable compatibility and actuator colour remain unresolved. Next check: Confirm exact cable construction and both end exposures against the equipment drawing. No hardware test, independent technical review or rights clearance is asserted. |
| TE bottom-contact assembly1-2492104-0 / 10 positionsInspect the declared view → (private workspace) | Bottom, per exact product page and drawing | Right-angle PCB orientation Stuffer, per product field; no motion instructions | Board receptacle for flex-to-board use Surface-mount PCB termination Evidence, date & limitsNew V128 observation. Observed . TE 1-2492104-0 product fields ↗ TE customer drawing 2492104, revision A ↗ Not established: Not a substitute for the seventeen-position part; opposite-end contact exposure, footprint interchange and cable wiring are not established. Next check: Check the ten-position identity independently of the top-contact example. No hardware test, independent technical review or rights clearance is asserted. |
| JST SH top-entry headerBM06B-SRSS-TB / six circuitsInspect the declared view → (private workspace) | FPC top/bottom-contact vocabulary does not apply to this row | Top entry; BM prefix in this catalogue No FPC stuffer actuator described for this header | Board header, not a cable housing SMT, per catalogue model allocation Evidence, date & limitsNew V128 observation. Observed . JST SH catalogue: entry, housing and contact roles ↗ Not established: Header orientation does not establish cable-housing selection, wiring, tooling, entry force or replacement approval. Next check: Match the full header and housing identities; keep circuit assignment as a separate equipment question. No hardware test, independent technical review or rights clearance is asserted. |
| JST SH side-entry headerSM06B-SRSS-TB / six circuitsInspect the declared view → (private workspace) | Not an FPC bottom-contact designation | Side entry; SM prefix in this catalogue No FPC stuffer actuator described for this header | Board header, not a cable housing SMT, per catalogue model allocation Evidence, date & limitsNew V128 observation. Observed . JST SH catalogue: entry, housing and contact roles ↗ Not established: No PCB drop-in replacement, full wire harness, FPC cable or mating approval is established. Next check: Read SM as this catalogue’s side-entry header code, not a universal abbreviation. No hardware test, independent technical review or rights clearance is asserted. |
| JST SH cable housingSHR-06V-S-B / six circuitsInspect the declared view → (private workspace) | Housing contacts and wire assignments need their own evidence | Cable housing, not a PCB entry designation Housing lance and separate crimp-contact system | Cable housing with protrusions Wire-to-board crimp system; not surface-mount termination of the housing Evidence, date & limitsNew V128 observation. Observed . JST SH catalogue: entry, housing and contact roles ↗ Not established: Inherited exterior image is not reclassified as newly drawn; terminal assembly, wire polarity and device match remain unknown. Next check: Distinguish housing, crimp contact and board header before recording a replacement. No hardware test, independent technical review or rights clearance is asserted. |
| Hirose DF13 socket contrastDF13-6S-1.25C / six contactsInspect the declared view → (private workspace) | Not an FPC top/bottom-contact designation | Socket role; no board orientation supplied for this housing No FPC stuffer-actuator inference | Single-row cable-side socket Miniature crimp family; housing is not a board footprint Evidence, date & limitsInherited V119 source observation; refresh unavailable. Observed . DF13 series catalog — single and double row sockets ↗ Not established: Source refresh could not be fetched in V128. Prior observation retained; no new DF13 dimensions, image inspection or mating approval. Next check: Keep the socket identity separate from the board header and from all JST families. No hardware test, independent technical review or rights clearance is asserted. |
P361 / NAMED EXAMPLE
TE top-contact assembly
1-2492111-7 / 17 positions
- Role
- Board receptacle for flex-to-board use
- Contact location
- Top, per exact product page and drawing
- Entry / orientation
- Right-angle PCB orientation; not a top-entry header
- Actuator
- Stuffer, per product field; operation not inferred
- Termination
- Surface-mount PCB termination
Evidence, date & limits
New V128 observation. Observed .
TE 1-2492111-7 product fields ↗
Features: configuration, contact mating location, FPC actuator type, cable type and dimensions.
TE customer drawing 2492111, revision A ↗
PDF sheet 1 of 2: front elevation below upper main view, section A-A, 17-position row, actuator material note; sheet 2 is packaging, not a cable insertion procedure. Revision A: 03-Apr-2025.
TE design objective 108-161738, revision 1 ↗
PDF page 1: title, section 1.1 Content and section 2 document precedence. Header dated 19-Jun-2025, Rev 1.
Not established: Cable continuity, opposite connector, finished cable compatibility and actuator colour remain unresolved.
Next check: Confirm exact cable construction and both end exposures against the equipment drawing.
No hardware test, independent technical review or rights clearance is asserted.
P362 / NAMED EXAMPLE
TE bottom-contact assembly
1-2492104-0 / 10 positions
- Role
- Board receptacle for flex-to-board use
- Contact location
- Bottom, per exact product page and drawing
- Entry / orientation
- Right-angle PCB orientation
- Actuator
- Stuffer, per product field; no motion instructions
- Termination
- Surface-mount PCB termination
Evidence, date & limits
New V128 observation. Observed .
TE 1-2492104-0 product fields ↗
Features: configuration, contact mating location, FPC actuator type, cable type and dimensions.
TE customer drawing 2492104, revision A ↗
PDF sheet 1 of 2: front elevation below upper main view, section A-A, 10-position row and actuator note. Sheet 2 inspected only to identify packaging scope. Revision A: 03-Apr-2025.
Not established: Not a substitute for the seventeen-position part; opposite-end contact exposure, footprint interchange and cable wiring are not established.
Next check: Check the ten-position identity independently of the top-contact example.
No hardware test, independent technical review or rights clearance is asserted.
P351 / NAMED EXAMPLE
JST SH top-entry header
BM06B-SRSS-TB / six circuits
- Role
- Board header, not a cable housing
- Contact location
- FPC top/bottom-contact vocabulary does not apply to this row
- Entry / orientation
- Top entry; BM prefix in this catalogue
- Actuator
- No FPC stuffer actuator described for this header
- Termination
- SMT, per catalogue model allocation
Evidence, date & limits
New V128 observation. Observed .
JST SH catalogue: entry, housing and contact roles ↗
PDF pages 2–4: housing six-circuit row, page 3 top-entry/side-entry side elevations and six-circuit row, page 4 BM/SM naming. No revision date visible on inspected pages.
Not established: Header orientation does not establish cable-housing selection, wiring, tooling, entry force or replacement approval.
Next check: Match the full header and housing identities; keep circuit assignment as a separate equipment question.
No hardware test, independent technical review or rights clearance is asserted.
P351 / NAMED EXAMPLE
JST SH side-entry header
SM06B-SRSS-TB / six circuits
- Role
- Board header, not a cable housing
- Contact location
- Not an FPC bottom-contact designation
- Entry / orientation
- Side entry; SM prefix in this catalogue
- Actuator
- No FPC stuffer actuator described for this header
- Termination
- SMT, per catalogue model allocation
Evidence, date & limits
New V128 observation. Observed .
JST SH catalogue: entry, housing and contact roles ↗
PDF pages 2–4: housing six-circuit row, page 3 top-entry/side-entry side elevations and six-circuit row, page 4 BM/SM naming. No revision date visible on inspected pages.
Not established: No PCB drop-in replacement, full wire harness, FPC cable or mating approval is established.
Next check: Read SM as this catalogue’s side-entry header code, not a universal abbreviation.
No hardware test, independent technical review or rights clearance is asserted.
P351 / NAMED EXAMPLE
JST SH cable housing
SHR-06V-S-B / six circuits
- Role
- Cable housing with protrusions
- Contact location
- Housing contacts and wire assignments need their own evidence
- Entry / orientation
- Cable housing, not a PCB entry designation
- Actuator
- Housing lance and separate crimp-contact system
- Termination
- Wire-to-board crimp system; not surface-mount termination of the housing
Evidence, date & limits
New V128 observation. Observed .
JST SH catalogue: entry, housing and contact roles ↗
PDF pages 2–4: housing six-circuit row, page 3 top-entry/side-entry side elevations and six-circuit row, page 4 BM/SM naming. No revision date visible on inspected pages.
Not established: Inherited exterior image is not reclassified as newly drawn; terminal assembly, wire polarity and device match remain unknown.
Next check: Distinguish housing, crimp contact and board header before recording a replacement.
No hardware test, independent technical review or rights clearance is asserted.
P360 / NAMED EXAMPLE
Hirose DF13 socket contrast
DF13-6S-1.25C / six contacts
- Role
- Single-row cable-side socket
- Contact location
- Not an FPC top/bottom-contact designation
- Entry / orientation
- Socket role; no board orientation supplied for this housing
- Actuator
- No FPC stuffer-actuator inference
- Termination
- Miniature crimp family; housing is not a board footprint
Evidence, date & limits
Inherited V119 source observation; refresh unavailable. Observed .
DF13 series catalog — single and double row sockets ↗
Page 3: Single Row Socket and Double Row Socket; DF13-6S-1.25C row and front elevation. PDF screenshot inspected.
Not established: Source refresh could not be fetched in V128. Prior observation retained; no new DF13 dimensions, image inspection or mating approval.
Next check: Keep the socket identity separate from the board header and from all JST families.
No hardware test, independent technical review or rights clearance is asserted.
SOURCE-OBSERVED / FRONT & SIDE ELEVATIONS
Show the useful side.
Leave hidden details unknown.
(private workspace)P361 / Source-observed physical study
Top-contact example / front elevation
TE 1-2492111-7 / 17 positions
Front elevation at the cable-entry edge · Board header
Seventeen simplified contact indicators at the upper side of the opening; no numbering, pin assignments, contact shape or mating approval.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P362 / Source-observed physical study
Bottom-contact example / front elevation
TE 1-2492104-0 / 10 positions
Front elevation at the cable-entry edge · Board header
Ten simplified contact indicators at the lower side of the opening; independent scaling, not a width or pinout comparison.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P351 / Source-observed physical study
JST SH top-entry header / side elevation
JST BM06B-SRSS-TB
Side elevation of the top-entry header · Board header
Named six-circuit header, side exterior only. Contacts are deliberately omitted; six circuits come from the catalogue row, not this view.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P351 / Source-observed physical study
JST SH side-entry header / side elevation
JST SM06B-SRSS-TB
Side elevation of the side-entry header · Board header
Named six-circuit header, side exterior only. No hidden contact row, wire assignments or approved mating pair is depicted.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)The TE drawings are family drawings: the exact 17- and 10-position table rows and product identities select the illustrated front rows. The JST side views cannot show their six-circuit rows; those contacts are omitted. Canvas sizes are not a physical scale comparison.
FIELD OUTPUT / SAME SOURCE LIMITS
Keep both sides of the evidence.
Three pages: orientation legend, six scoped examples, and source/conflict notes. No wiring, insertion sequence or fit approval.
Letter PDF · 3 pages ↓ (legacy download held for current evidence review). Current focused printable referencesA4 PDF · 3 pages ↓ (legacy download held for current evidence review). Current focused printable references
New observations, not new approvals.
Six source observations are stored outside the canonical claim catalogue. Four existing references are enriched; the catalogue counts do not increase. The DF13 row retains its inherited evidence because a fresh source fetch was unavailable. FH12 acquisition was also blocked; no third-party substitute was used.
Four manufacturer PDFs were inspected through the source viewer. Raw downloads could not be retained; no raw-source file checksum is claimed. All six original illustrations remain pending independent technical and rights review.
The four earlier exact power-connector requests and exact RF 132134RP view remain open. These new views improve already illustrated forms; they do not close the no-specimen coverage gap.
See the complete coverage audit → · Visual Atlas Series 10 →