JST PH
Typical PH family
- Documented reading
- 2.0 mm nominal pitch. Exact entry and mounting variants vary.
- Do not infer
- Do not select a housing or terminal from pitch alone.
- Next check
- Find the full header, housing and contact numbers.
PORT & CABLE / FIELD GUIDES / 01 / MINIATURE REPAIR
Small connectors. Exact families.
Seven family and named-part rows separate pitch, component role and the next identification check. Typical pitch is not a universal part specification.
Each PDF includes two pages: the chart, then source notes and a reused visual. Downloads work in the native site and full offline preview. Evidence dates remain unchanged.
01 / KEEP THE LIMIT BESIDE THE ANSWER
The side-by-side reference.
| Label / exact scope | What the evidence establishes | What to check next |
|---|---|---|
| JST PHTypical PH family | 2.0 mm nominal pitch. Exact entry and mounting variants vary. Do not infer: Do not select a housing or terminal from pitch alone. | Find the full header, housing and contact numbers. |
| JST XHTypical family plus named exceptions | Ordinary XH is nominally 2.5 mm. XHP-2(10.0)-U and XHP-6(5.0)-U are named 10.0 / 5.0 mm variants. Do not infer: The XH nickname is not a promise of 2.5 mm spacing on every part. | Compare the exact suffix and occupied positions. |
| JST SHSH housing variants | 1.0 mm nominal pitch. Housings with and without protrusions are documented. Do not infer: Same pitch and circuit count do not settle the housing outline. | Check the full housing suffix against the specified mate. |
| JST GHTypical GH family | 1.25 mm nominal pitch, secure locking and keyed variants. Do not infer: Shared pitch with DF13 does not establish a mating pair. | Identify the locking feature and complete part numbers. |
| Hirose DF13DF13 socket families | 1.25 mm nominal pitch. Single-row and double-row socket families are documented. Do not infer: Family and pitch alone do not specify a socket or a JST GH mate. | Record row count, circuit count and complete socket suffix. |
| Molex Mini-Fit Jr.874272002 only | 4.20 mm nominal pitch; right-angle PCB header; 20 circuits. Do not infer: This header example is not a PSU harness specification. | Match the exact header and cable-housing documentation. |
| Molex Micro-Fit 3.0430451200 only | 3.00 mm nominal pitch; dual-row, right-angle header; 12 circuits. Do not infer: It is a board header, not a universal cable end or Mini-Fit mate. | Verify exact header, housing and contact selections. |
JST XH
Typical family plus named exceptions
- Documented reading
- Ordinary XH is nominally 2.5 mm. XHP-2(10.0)-U and XHP-6(5.0)-U are named 10.0 / 5.0 mm variants.
- Do not infer
- The XH nickname is not a promise of 2.5 mm spacing on every part.
- Next check
- Compare the exact suffix and occupied positions.
JST SH
SH housing variants
- Documented reading
- 1.0 mm nominal pitch. Housings with and without protrusions are documented.
- Do not infer
- Same pitch and circuit count do not settle the housing outline.
- Next check
- Check the full housing suffix against the specified mate.
JST GH
Typical GH family
- Documented reading
- 1.25 mm nominal pitch, secure locking and keyed variants.
- Do not infer
- Shared pitch with DF13 does not establish a mating pair.
- Next check
- Identify the locking feature and complete part numbers.
Hirose DF13
DF13 socket families
- Documented reading
- 1.25 mm nominal pitch. Single-row and double-row socket families are documented.
- Do not infer
- Family and pitch alone do not specify a socket or a JST GH mate.
- Next check
- Record row count, circuit count and complete socket suffix.
Molex Mini-Fit Jr.
874272002 only
- Documented reading
- 4.20 mm nominal pitch; right-angle PCB header; 20 circuits.
- Do not infer
- This header example is not a PSU harness specification.
- Next check
- Match the exact header and cable-housing documentation.
Molex Micro-Fit 3.0
430451200 only
- Documented reading
- 3.00 mm nominal pitch; dual-row, right-angle header; 12 circuits.
- Do not infer
- It is a board header, not a universal cable end or Mini-Fit mate.
- Next check
- Verify exact header, housing and contact selections.
02 / SEE THE DISTINCTION
A visual aid, not a fit gauge.
(private workspace)JST PH
PHR-4 four-circuit housing
cable-housing · External elevation
physical-study · not to scale · technical/rights reviews pending. Only an exterior housing elevation is shown. The unseen mating face and exact tolerances are not reconstructed.
Inspect this exact view and carry its context → (private workspace)
(private workspace)Hirose DF13 socket
DF13-6S-1.25C
other · Front exterior; contact cavities simplified
physical-study · not to scale · technical/rights reviews pending. Qualitative exterior only; not to scale. No pin numbering, device wiring, fabrication tolerance or mating approval.
Inspect this exact view and carry its context → (private workspace)03 / THE EVIDENCE STAYS ATTACHED
Read the scope behind each row.
Compiled 2026-10-11 from inherited observations. A compilation date is not a new source inspection. Expand a row for its original claims, dates and source locators.
JST PH C349A · C349B
Example scope: Typical PH family
C349A / P349
JST identifies its PH family as nominal 2.0 mm pitch wire-to-board connectors.
Manufacturer-specific family/physical identification only. No inferred device wiring, mating verification or installation approval.
Original claim verification: 2026-10-09. Status: source_checked. No independent hardware approval.
C349B / P349
The manufacturer lists top- and side-entry configurations, through-hole and SMT mounts, and friction locking, which require exact variant selection.
Manufacturer-specific family/physical identification only. No inferred device wiring, mating verification or installation approval.
Original claim verification: 2026-10-09. Status: source_checked. No independent hardware approval.
S459 · J.S.T. Mfg. Co., Ltd. — PH connector series product profile
Product Profile; Pitch 2 mm; single-row, friction-lock, top/side entry, housing and header series · Source record checked 2026-10-09
JST XH C350A · C350D
Example scope: Typical family plus named exceptions
C350A / P350
JST specifies nominal 2.5 mm pitch and a single-row wire-to-board form for XH.
Manufacturer-specific family/physical identification only. No inferred device wiring, mating verification or installation approval.
Original claim verification: 2026-10-09. Status: source_checked. No independent hardware approval.
C350D / P350
The XH catalog also identifies reduced-population XHP-2(10.0)-U and XHP-6(5.0)-U variants at 10.0 mm and 5.0 mm pitch respectively.
These specifically named exceptions must not be treated as the ordinary nominal 2.5 mm XH arrangement.
Original claim verification: 2026-10-11. Status: source_checked. No independent hardware approval.
S460 · J.S.T. Mfg. Co., Ltd. — XH connector series product profile
Product Profile; Pitch 2.5 mm; friction lock; top/side entry; XHP housing and B#B-XH header references · Source record checked 2026-10-09
S476 · JST — XH connector catalog — housing variants
Page 4: XHP housing table and elevations; XHP-4; reduced-population XHP-2(10.0)-U and XHP-6(5.0)-U notes. · Source record checked 2026-10-11
JST SH C351A · C351C
Example scope: SH housing variants
C351A / P351
JST describes SH as a nominal 1.0 mm pitch, compact, low-profile wire-to-board series with friction locking.
Manufacturer-specific family/physical identification only. No inferred device wiring, mating verification or installation approval.
Original claim verification: 2026-10-09. Status: source_checked. No independent hardware approval.
C351C / P351
The JST SH catalog distinguishes cable housings with protrusions from cable housings without protrusions.
Compare the full housing suffix and the exact circuit-count row.
Original claim verification: 2026-10-11. Status: source_checked. No independent hardware approval.
S461 · J.S.T. Mfg. Co., Ltd. — SH connector series product profile
Product Profile; Pitch 1 mm; low-profile SH series; friction lock; SR/SZ variants noted · Source record checked 2026-10-09
S487 · JST — SH connector catalog — housing variants
Page 2: Housing, with/without protrusions; six-circuit SHR-06V-S-B and SHR-06V-S rows. PDF screenshot inspected. · Source record checked 2026-10-11
JST GH C352A · C352B · C360B
Example scope: Typical GH family
C352A / P352
JST specifies a nominal 1.25 mm pitch wire-to-board family for GH and describes positive secure locking.
Manufacturer-specific family/physical identification only. No inferred device wiring, mating verification or installation approval.
Original claim verification: 2026-10-09. Status: source_checked. No independent hardware approval.
C352B / P352
The GH manufacturer profile identifies keying and side- and top-entry mounting options that require exact mating-component identification.
Manufacturer-specific family/physical identification only. No inferred device wiring, mating verification or installation approval.
Original claim verification: 2026-10-09. Status: source_checked. No independent hardware approval.
C360B / P360
The DF13 series includes different contact counts and mounting arrangements; a 1.25 mm pitch alone does not specify an exact DF13 part or establish mating to JST GH.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
S462 · J.S.T. Mfg. Co., Ltd. — GH connector series product profile
Product Profile; Pitch 1.25 mm; secure locking and keying; top/side entry · Source record checked 2026-10-09
S470 · Hirose Electric — DF13 Series — 1.25 mm pitch miniature crimping connectors
DF13 Series heading; features; specifications listing connector type, mounting pitch 1.25 mm and multiple position options · Source record checked 2026-10-10
Hirose DF13 C360A · C360B · C360C
Example scope: DF13 socket families
C360A / P360
Hirose describes its DF13 series as 1.25 mm pitch miniature crimping connectors and lists header, socket and contact product types.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
C360B / P360
The DF13 series includes different contact counts and mounting arrangements; a 1.25 mm pitch alone does not specify an exact DF13 part or establish mating to JST GH.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
C360C / P360
The Hirose DF13 catalog separately documents single-row and double-row socket families.
A family label and pitch alone do not specify row count or an exact mate.
Original claim verification: 2026-10-11. Status: source_checked. No independent hardware approval.
S470 · Hirose Electric — DF13 Series — 1.25 mm pitch miniature crimping connectors
DF13 Series heading; features; specifications listing connector type, mounting pitch 1.25 mm and multiple position options · Source record checked 2026-10-10
S488 · Hirose Electric — DF13 series catalog — single and double row sockets
Page 3: Single Row Socket and Double Row Socket; DF13-6S-1.25C row and front elevation. PDF screenshot inspected. · Source record checked 2026-10-11
Molex Mini-Fit Jr. C358A · C358B
Example scope: 874272002 only
C358A / P358
Molex product 874272002 is described as a Mini-Fit Jr. right-angle PCB header with 20 circuits and 4.20 mm nominal pitch.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
C358B / P358
The cited Molex product is a PCB header example, not a universal pinout, replacement cable or safety endorsement for a power supply.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
S468 · Molex — Mini-Fit Jr. header product 874272002
Part Number 874272002; product name, series 87427, 4.20 mm mating-interface pitch, right-angle, 20 circuits · Source record checked 2026-10-10
Molex Micro-Fit 3.0 C359A · C359B
Example scope: 430451200 only
C359A / P359
Molex describes product 430451200 as a Micro-Fit 3.0 right-angle header with 3.00 mm nominal pitch, dual-row arrangement and 12 circuits.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
C359B / P359
Molex identifies 430451200 as a PCB header; its description does not establish the electrical assignment of a device cable or an intermate with Mini-Fit Jr.
Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Original claim verification: 2026-10-10. Status: source_checked. No independent hardware approval.
S469 · Molex — Micro-Fit 3.0 product 430451200
Part Details > General > Series 43045; Micro-Fit 3.0 right-angle header, 3.00 mm pitch, dual row, 12 circuits · Source record checked 2026-10-10