Three-quarter view Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Mating face Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Fitted in place Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Recognition drawing Original schematic, not to scale. Drawing review pending.
Image inspection / P208
See the view. Check its scope.
1 registered view for this reference. Different part examples are not automatically mates; all remain not to scale and independently unapproved.
(private workspace)
P208 / Source-observed physical study
8-pole speakON / NL8FC
Neutrik NL8FC / ST-NL8FC latch-side exterior
Longitudinal exterior labelled Rear side in source · Cable plug / cable end
Not to scale. Technical and rights review pending.
Inspect view & provenance ↗ (private workspace)
The useful distinction
Recognize it. Then verify it.
The eight-pole speakON form is a high-contact-count loudspeaker connector, distinct from AC mains connectors. [C208A]
Neutrik classifies NL8FC as a female speakON cable connector and specifies a Quick Lock latch; the product is intended for loudspeaker connections. [C208B]
The ST-NL8FC sheet distinguishes two longitudinal exterior views from a separate insert-detail view. The latch is visible on the exterior view labelled Rear side. [C208C]
Source-scoped identification facts
Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.
Documented examples; not a mating drawing or compatibility approval
Nominal contacts
8S211Nominal pole count only; V36 does not assign amplifier channels or terminals.
Connector role
cable socket (NL8FC)S916Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NL8FC. Documented role: cable socket. Current8–20mm cableODacceptance is not external connector diameter. Not an ACmains/power-supply connector.
Mounting
cable (Claim C208A); cable (Claim C208B)S211 · S211Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V36 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction or end-to-end compatibility proof. Exact component role and retention. No amplifier channel allocation, bridge-mode wiring, cable rating or power-supply use is established.
Coupling / latch
latch (Claim C208B); Quick Lock twist-latch (NL8FC)S211 · S916Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. Exact component role and retention. No amplifier channel allocation, bridge-mode wiring, cable rating or power-supply use is established. NL8FC. Documented role: cable socket. Current8–20mm cableODacceptance is not external connector diameter. Not an ACmains/power-supply connector.
Manufacturer
Neutrik (NL8FC)S916Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NL8FC. Documented role: cable socket. Current8–20mm cableODacceptance is not external connector diameter. Not an ACmains/power-supply connector.
Series
speakON (NL8FC)S916Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NL8FC. Documented role: cable socket. Current8–20mm cableODacceptance is not external connector diameter. Not an ACmains/power-supply connector.
Exact part / implementation
NL8FC (NL8FC)S916Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NL8FC. Documented role: cable socket. Current8–20mm cableODacceptance is not external connector diameter. Not an ACmains/power-supply connector.
Not recorded: Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.
Recorded variant and source limits
Pole count does not establish amplifier-channel assignment.
The connector family is not an AC mains connector.
No fabrication dimensions or live-connection procedure are published.
Neutrik wiring suggestion: 4-way system on one NL8MPR socket: Neutrik designations.
Neutrik NL8MPR contact designations (no application): Neutrik contact designations 1+ ... 4-; BDA 458 shows the NL8MPR from the rear (tab) side. Do not transfer positions to the mating face.
d&b D20 Touring rack '4 CH OUTPUTS' NL8 (all four D20 channels): Neutrik contact designations 1+ ... 4-; BDA 458 shows the NL8MPR from the rear (tab) side. Do not transfer positions to the mating face.
Neutrik wiring suggestion: 4-way system on one NL8 cable: Neutrik contact designations 1+ ... 4-; BDA 458 shows the NL8MPR from the rear (tab) side. Do not transfer positions to the mating face.
Not included. Check exact device and accessory documentation.
A boundary, not an omission to guess around.
Use the source-backed form or position count only for identification. Resolve ratings, protocol, direction, wiring, cable construction and exact device support from the relevant equipment and component documentation.
Before you connect
What to check
Identify the exact connector family and variant from the equipment or cable documentation.
Keep shape, contact count, protocol, electrical rating and device support as separate facts.
Do not force, rewire or adapt a connector from this recognition record; resolve the remaining requirements first.
Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.
What the status labels mean
Confirmed
Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source
Only one underlying document, or one pass, supports this assignment.
Device-specific
Supported for the named equipment or wiring only. Check your device’s manual.
Unverified
Missing or conflicting evidence. Do not wire from this row.
Not connected
The source explicitly says NC, no contact or no pin for this wiring.
What is not established
This field note does not approve a connection, adapter, cable assembly, rewiring scheme or fabricated part. It intentionally omits unsupported pin assignments and mechanical tolerances.
Loudspeaker service is not mains service
NL8FC is the named female cable connector used for the study. Its Quick Lock latch helps distinguish the component; it does not establish amplifier channel allocation or bridge wiring. The manufacturer explicitly excludes speakON from AC mains or power-supply use.
An insert-detail view is not a mating face
The linked sheet labels two longitudinal exterior views and a separate insert detail. The original study uses only the latch-side exterior. The terminal detail is deliberately not transformed into an invented front contact pattern.
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
Locator: Product overview and application warning Access: public page. Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.
Locator: Product overview and application warning Access: public page. Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.
Claim scope: Exact component role and retention. No amplifier channel allocation, bridge-mode wiring, cable rating or power-supply use is established.. Next review due 2027-01-11.
The ST-NL8FC sheet distinguishes two longitudinal exterior views from a separate insert-detail view. The latch is visible on the exterior view labelled Rear side.
Locator: Single sheet; longitudinal views labelled Front side and Rear side, plus separate side view detail insert; revision A, changed-date 21.03.06. Access: public page. Latch-side exterior selected; the exposed terminal detail is not relabelled as a mating face. No internal wiring or contacts invented. Raw document bytes were not obtained in the container; no raw-file hash or archived-source possession is claimed.
Claim scope: View-label interpretation and observed exterior only. The insert detail is not used as an external mating-face drawing; electrical contact layout is not reconstructed.. Next review due 2027-01-11.
Candidate selection does not confirm the identity or capabilities of your physical item.
SOURCE-OBSERVED AUDIO COMPONENTS
A loudspeaker connector is not a mains plug.
The NL8FC study follows the latch-side exterior. Its drawing’s insert detail is not republished as a mating face. Keep the manufacturer’s no-mains/power-supply warning with this form.
Neutrik classifies NL8FC as a female speakON cable connector and specifies a Quick Lock latch; the product is intended for loudspeaker connections. C208B
Exact component role and retention. No amplifier channel allocation, bridge-mode wiring, cable rating or power-supply use is established.
The ST-NL8FC sheet distinguishes two longitudinal exterior views from a separate insert-detail view. The latch is visible on the exterior view labelled Rear side. C208C
View-label interpretation and observed exterior only. The insert detail is not used as an external mating-face drawing; electrical contact layout is not reconstructed.
Assessment 2026-10-22 · earliest scheduled source review 2027-01-03. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Scoped support: Identifies NL8FC as an eight-pole speakON cable connector and distinguishes the loudspeaker connector family from AC mains use.
Not established / limitations: Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.
Scoped support: Latch-side exterior selected; the exposed terminal detail is not relabelled as a mating face. No internal wiring or contacts invented.
Not established / limitations: Latch-side exterior selected; the exposed terminal detail is not relabelled as a mating face. No internal wiring or contacts invented. Raw document bytes were not obtained in the container; no raw-file hash or archived-source possession is claimed.
Locator: Single sheet; longitudinal views labelled Front side and Rear side, plus separate side view detail insert; revision A, changed-date 21.03.06.
Trace 3 claims to their source records
C208A · P208
Neutrik identifies NL8FC as an eight-pole speakON cable connector and excludes the connector family from AC mains use.
Claim scope: V36 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction or end-to-end compatibility proof.
The ST-NL8FC sheet distinguishes two longitudinal exterior views from a separate insert-detail view. The latch is visible on the exterior view labelled Rear side.
Claim scope: View-label interpretation and observed exterior only. The insert detail is not used as an external mating-face drawing; electrical contact layout is not reconstructed.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
(private workspace)
