FIELD REFERENCE / OPTICAL ENDS

Similar shapes.
Different optical jobs.

A cable end, an adapter and a panel opening answer different questions. Keep the part record, the pictured example and the signal requirements separate.

01 / ITEM IDENTITY

What was actually identified?

An exact catalogue row, a named cable assembly and a shared family photograph are different evidence scopes.

02 / COMPONENT ROLE

Which job does it perform?

Keep optical mating interfaces, panel cutouts, kits and complete cable assemblies in separate fields.

03 / EQUIPMENT

What remains to be checked?

The port function and complete optical path still need their own documentation.

ONE NEWLY ILLUSTRATED FORM / FOUR NEWLY SOURCE-OBSERVED FORMS

Useful views.
Explicit identities.

P204 / Source-observed physical study

MT-RJ / named assembly end

StarTech FIBMTST10 / MT-RJ end only

Oblique exterior of the MT-RJ end in the named cable photograph; mating-face details omitted. · Cable plug / cable end

The MT-RJ end of a named FIBMTST10 assembly, not a bare-connector order code. Original qualitative study, not an optical face or pin map.

Not to scale. Technical and rights review pending.

Inspect view & provenance

P025 / Source-observed physical study

Mini optical / capped series example

CLIFF FM652xx / 3.5 mm optical cable end

Side-biased exterior based on the mixed-ended cable photograph; protective cap retained. · Cable plug / cable end

Named FM652xx optical-cable family photograph only. No exact cable length selected. The protective cap obscures the optical tip.

Not to scale. Technical and rights review pending.

Inspect view & provenance

P066 / Source-observed physical study

LC/LC adapter / SC panel cutout

Corning 740-0085-006-B / LC/LC adapter

Oblique exterior body study from the row-specific catalogue photograph; sleeve and end details omitted. · Other declared component

Exact catalogue-row identity, qualitative outer body only. SC is the documented panel cutout, not the stated optical connector interface.

Not to scale. Technical and rights review pending.

Inspect view & provenance

P067 / Source-observed physical study

SC / shared UniCam family example

Corning UniCam / SC family photo

Oblique exterior of the SC example in the shared UniCam photograph, not the exact product code beside it. · Cable plug / cable end

Named UniCam SC family study. The same image is reused by distinct product pages, so it is not assigned the exact 95-200-41 identity or polish.

Not to scale. Technical and rights review pending.

Inspect view & provenance

MT-RJ gains its first registered specimen: the MT-RJ end of the named StarTech FIBMTST10 cable assembly. The LC/LC adapter follows one exact Corning catalogue row. The mini-optical and SC studies are named-series examples, not exact ordered plugs. All four are qualitative exteriors, not a shared scale or manufacturing geometry. Source photographs and manufacturer logos are not reproduced.

PART RECORD / PHOTO SCOPE / UNKNOWN / NEXT CHECK

Seven examples. Five existing references.

Compare TOSLINK and mini optical → · Compare LC and SC → · Open the network desk →

Seven examples across five forms. Product identity, photographed component, mechanical cutout and optical function stay separate. Not a mating, loss or wiring table.
Reference example	Role & documented distinction	What this establishes	What to check next
TOSLINK / mixed optical endsCLIFF FM65215 optical cable No source-observed physical view is selected for this row.	Complete cable, not an electronic converter One TOSLINK end and one 3.5 mm optical end.	The listed assembly connects optical connector forms; its entry does not establish analog or codec conversion. Evidence, observation & limits Inspected 2026-10-11. C024E TOSLINK optical cables and 3.5 mm optical adaptor — issue 5 ↗ V131 observation: Issue 5, copyright 09/2023; PDF pp.1–2: FM65010 adaptor and FM65215/20/25 mixed-ended optical cables. Only p.2 photograph visually inspected. Canonical source record S533 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: Equipment optical port function, supported formats and the entire connection. Next check: Read both endpoint manuals before selecting the cable.
Mini optical / adaptor identityCLIFF FM65010 optical-jack adaptor No source-observed physical view is selected for this row.	Optical adaptor, distinct from the FM65215 cable A separate catalogue item; the exact adaptor photograph was not inspected.	The item text says optical. A 3.5 mm shape alone does not establish an optical-capable socket. Evidence, observation & limits Inspected 2026-10-11. C025F TOSLINK optical cables and 3.5 mm optical adaptor — issue 5 ↗ V131 observation: Issue 5, copyright 09/2023; PDF pp.1–2: FM65010 adaptor and FM65215/20/25 mixed-ended optical cables. Only p.2 photograph visually inspected. Canonical source record S533 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: Exact adaptor geometry and compatibility with a particular port. Next check: Confirm the port is documented for optical use and obtain the exact adaptor drawing.
Mini optical / photo scopeCLIFF FM65215 / FM65220 / FM65225 familyInspect the declared view → (private workspace)	Cable-end study, protective cap visible Three length rows accompany the shared photograph.	The study shows the family exterior with its cap, not an exact length or an exposed optical tip. Evidence, observation & limits Inspected 2026-10-11. C025G TOSLINK optical cables and 3.5 mm optical adaptor — issue 5 ↗ V131 observation: Issue 5, copyright 09/2023; PDF pp.1–2: FM65010 adaptor and FM65215/20/25 mixed-ended optical cables. Only p.2 photograph visually inspected. Canonical source record S533 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: Cable-length identity, uncapped tip, receiver function and codec support. Next check: Use the ordered code for length; use equipment documentation for function.
LC / kit versus assembled plugCorning 95-200-99 kit No source-observed physical view is selected for this row.	Field-installable kit Package text includes a trigger, crimp band and three boot options.	The exact kit record does not make the shared UniCam image an exact-part photograph. Evidence, observation & limits Inspected 2026-10-11. C066E UniCam LC connector kit — 95-200-99 ↗ V131 observation: Product heading and Package Contents. Linked UniCam family image separately inspected; no exact-part image assigned. Canonical source record S534 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: Which loose parts are present, completed assembly state and exact plug photograph. Next check: Match the kit label and contents against its installation documentation; no assembly procedure is supplied here.
LC/LC / SC panel cutoutCorning 740-0085-006-BInspect the declared view → (private workspace)	Duplex adapter, exact catalogue row Optical interface LC/LC; mechanical descriptor SC cutout.	These are two different fields, not an LC-to-SC optical interface. Evidence, observation & limits Inspected 2026-10-11. C066F Fiber Optic OEM Products — component ordering guide OEM-064-AEN ↗ V131 observation: OEM-064-AEN, printed p.15 (PDF index14): single-mode LC/LC adapter row 740-0085-006-B, its SC-cutout description and the row-specific photograph. Canonical source record S530 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: Panel dimensions, retention, optical end conditions and actual mating pair. Next check: Check the exact adapter and panel drawings before assuming physical fit.
SC / shared family imageCorning 95-200-41 kit; separate UniCam family viewInspect the declared view → (private workspace)	Kit record and family photograph, kept distinct Package text includes a shroud, crimp band and two boot options.	The nearby code identifies the text record. The shared photograph is not proof of that code or polish. Evidence, observation & limits Inspected 2026-10-11. C067E UniCam SC connector kit — 95-200-41 ↗ V131 observation: Product heading and Package Contents; linked UniCam family photo, middle SC example, visually inspected. Canonical source record S535 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: Exact ordered-part appearance and the completeness of a loose kit. Next check: Use the kit label for identity; do not assign the illustration a part code or polish.
MT-RJ / named cable assemblyStarTech FIBMTST10Inspect the declared view → (private workspace)	MT-RJ-to-ST-duplex assembly MT-RJ and ST duplex ends; the sheet classifies this assembly as OM1.	The exterior study belongs to this named assembly, not to a separately ordered bare connector. Evidence, observation & limits Inspected 2026-10-11. C204C · C204D FIBMTST10 — MT-RJ to ST duplex fiber assembly ↗ V131 observation: PDF pp.1–2: named assembly photograph, fiber classification and connector-end table. Both pages visually inspected. Canonical source record S536 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged. No hardware test, independent technical approval or rights clearance is asserted.	Not established: MT-RJ pin state, bare part number, fiber mapping and endpoint compatibility. Next check: Confirm the assembly specification and full optical path; do not infer mapping from the housing.

P024 / SOURCE-SCOPED EXAMPLE

TOSLINK / mixed optical ends

CLIFF FM65215 optical cable

Component / source role: Complete cable, not an electronic converter
Documented distinction: One TOSLINK end and one 3.5 mm optical end.
What is established: The listed assembly connects optical connector forms; its entry does not establish analog or codec conversion.
Not established: Equipment optical port function, supported formats and the entire connection.
Next check: Read both endpoint manuals before selecting the cable.

No source-observed physical view is selected for this row.

Evidence, observation & limits

Inspected 2026-10-11. C024E

TOSLINK optical cables and 3.5 mm optical adaptor — issue 5 ↗
V131 observation: Issue 5, copyright 09/2023; PDF pp.1–2: FM65010 adaptor and FM65215/20/25 mixed-ended optical cables. Only p.2 photograph visually inspected.
Canonical source record S533 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged.

No hardware test, independent technical approval or rights clearance is asserted.

P025 / SOURCE-SCOPED EXAMPLE

Mini optical / adaptor identity

CLIFF FM65010 optical-jack adaptor

Component / source role: Optical adaptor, distinct from the FM65215 cable
Documented distinction: A separate catalogue item; the exact adaptor photograph was not inspected.
What is established: The item text says optical. A 3.5 mm shape alone does not establish an optical-capable socket.
Not established: Exact adaptor geometry and compatibility with a particular port.
Next check: Confirm the port is documented for optical use and obtain the exact adaptor drawing.

No source-observed physical view is selected for this row.

Evidence, observation & limits

Inspected 2026-10-11. C025F

No hardware test, independent technical approval or rights clearance is asserted.

P025 / SOURCE-SCOPED EXAMPLE

Mini optical / photo scope

CLIFF FM65215 / FM65220 / FM65225 family

Component / source role: Cable-end study, protective cap visible
Documented distinction: Three length rows accompany the shared photograph.
What is established: The study shows the family exterior with its cap, not an exact length or an exposed optical tip.
Not established: Cable-length identity, uncapped tip, receiver function and codec support.
Next check: Use the ordered code for length; use equipment documentation for function.

Inspect the declared view →

Evidence, observation & limits

Inspected 2026-10-11. C025G

No hardware test, independent technical approval or rights clearance is asserted.

P066 / SOURCE-SCOPED EXAMPLE

LC / kit versus assembled plug

Corning 95-200-99 kit

Component / source role: Field-installable kit
Documented distinction: Package text includes a trigger, crimp band and three boot options.
What is established: The exact kit record does not make the shared UniCam image an exact-part photograph.
Not established: Which loose parts are present, completed assembly state and exact plug photograph.
Next check: Match the kit label and contents against its installation documentation; no assembly procedure is supplied here.

No source-observed physical view is selected for this row.

Evidence, observation & limits

Inspected 2026-10-11. C066E

UniCam LC connector kit — 95-200-99 ↗
V131 observation: Product heading and Package Contents. Linked UniCam family image separately inspected; no exact-part image assigned.
Canonical source record S534 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged.

No hardware test, independent technical approval or rights clearance is asserted.

P066 / SOURCE-SCOPED EXAMPLE

LC/LC / SC panel cutout

Corning 740-0085-006-B

Component / source role: Duplex adapter, exact catalogue row
Documented distinction: Optical interface LC/LC; mechanical descriptor SC cutout.
What is established: These are two different fields, not an LC-to-SC optical interface.
Not established: Panel dimensions, retention, optical end conditions and actual mating pair.
Next check: Check the exact adapter and panel drawings before assuming physical fit.

Inspect the declared view →

Evidence, observation & limits

Inspected 2026-10-11. C066F

Fiber Optic OEM Products — component ordering guide OEM-064-AEN ↗
V131 observation: OEM-064-AEN, printed p.15 (PDF index14): single-mode LC/LC adapter row 740-0085-006-B, its SC-cutout description and the row-specific photograph.
Canonical source record S530 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged.

No hardware test, independent technical approval or rights clearance is asserted.

P067 / SOURCE-SCOPED EXAMPLE

SC / shared family image

Corning 95-200-41 kit; separate UniCam family view

Component / source role: Kit record and family photograph, kept distinct
Documented distinction: Package text includes a shroud, crimp band and two boot options.
What is established: The nearby code identifies the text record. The shared photograph is not proof of that code or polish.
Not established: Exact ordered-part appearance and the completeness of a loose kit.
Next check: Use the kit label for identity; do not assign the illustration a part code or polish.

Inspect the declared view →

Evidence, observation & limits

Inspected 2026-10-11. C067E

UniCam SC connector kit — 95-200-41 ↗
V131 observation: Product heading and Package Contents; linked UniCam family photo, middle SC example, visually inspected.
Canonical source record S535 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged.

No hardware test, independent technical approval or rights clearance is asserted.

P204 / SOURCE-SCOPED EXAMPLE

MT-RJ / named cable assembly

StarTech FIBMTST10

Component / source role: MT-RJ-to-ST-duplex assembly
Documented distinction: MT-RJ and ST duplex ends; the sheet classifies this assembly as OM1.
What is established: The exterior study belongs to this named assembly, not to a separately ordered bare connector.
Not established: MT-RJ pin state, bare part number, fiber mapping and endpoint compatibility.
Next check: Confirm the assembly specification and full optical path; do not infer mapping from the housing.

Inspect the declared view →

Evidence, observation & limits

Inspected 2026-10-11. C204C · C204D

FIBMTST10 — MT-RJ to ST duplex fiber assembly ↗
V131 observation: PDF pp.1–2: named assembly photograph, fiber classification and connector-end table. Both pages visually inspected.
Canonical source record S536 dated 2026-10-11. The V131 visit is recorded separately; inherited source dates are unchanged.

No hardware test, independent technical approval or rights clearance is asserted.

TWO CONCEPTS / NOT PHYSICAL SPECIMENS

A shape is not a signal converter.

Optical end shapes / signal function. Abstract role diagram, not a drawing of the uninspected FM65010 adaptor. Read from item identity to equipment requirements; no physical interface depicted. No dimensional, wiring or compatibility approval. — A product labelled optical is not evidence that an arbitrary electrical audio output becomes optical. This is a reading boundary, not a tested conversion path. Inspect the concept and its source → (private workspace)

Panel cutout / optical interface. Two separate text fields based on one documented adapter row; not a dimensional panel drawing. Optical interface and mechanical cutout shown as distinct labels. No dimensional, wiring or compatibility approval. — An LC/LC adapter described with an SC cutout does not become an LC-to-SC optical adapter. Dimensions and universal panel fit remain unverified. Inspect the concept and its source → (private workspace)

The CLIFF optical-adaptor listing does not establish conversion electronics. The Corning adapter row describes LC/LC optical interfaces and an SC panel cutout—not an LC-to-SC optical adapter. These distinctions do not supply device or panel compatibility approvals.

FIELD OUTPUT / FOUR PAGES / SOURCE CONTEXT RETAINED

Keep the identity beside the image.

Four original exterior studies, seven source-qualified examples and a dated source ledger. No wiring, fabrication or optical-link approval.

Letter PDF · 4 pages ↓ (legacy download held for current evidence review). Current focused printable referencesA4 PDF · 4 pages ↓ (legacy download held for current evidence review). Current focused printable references

What remains unresolved?

The exact FM65010 adaptor image is missing. The shared UniCam photograph does not close the exact LC 95-200-99 or SC 95-200-41 plug-image requests. The MT-RJ study identifies a cable assembly, not a bare connector or pin state. Small adapter-photo details are not enlarged into precision geometry.

Eight canonical claims and four new canonical sources deepen five existing forms. Five auxiliary observations identify the actual pages and images inspected. Ambiguous CLIFF units, the Corning security-key field and the MT-RJ body-type column are not silently normalized into dimensions, mechanical keying or channel count. Manufacturer originals are not redistributed; technical and rights reviews remain pending.

See measured coverage gaps → · Visual Atlas Series 13 →

What was actually identified?

Which job does it perform?

What remains to be checked?

Useful views.Explicit identities.

MT-RJ / named assembly end

Mini optical / capped series example

LC/LC adapter / SC panel cutout

SC / shared UniCam family example

Seven examples. Five existing references.

TOSLINK / mixed optical ends

Mini optical / adaptor identity

Mini optical / photo scope

LC / kit versus assembled plug

LC/LC / SC panel cutout

SC / shared family image

MT-RJ / named cable assembly

A shape is not a signal converter.

Keep the identity beside the image.

What remains unresolved?

Keep the evidence in reach.

Useful views.
Explicit identities.