PORT & CABLE / FIELD REFERENCE 23 / SOURCE-SCOPED REFERENCE
Which end?
Which condition?
An IEC designation is a start, not a power-cord approval. Compare the cord connector, equipment inlet and manufacturer-defined temperature condition before searching for the correct documentation.
Six existing catalogue forms have new, primary-manufacturer evidence. Each illustration is an original, non-dimensional exterior study: no mechanical gauge, contact/key map, cord wiring, rating or installation instructions are published.
EDITORIAL TAXONOMY / NOT A PHYSICAL COUPLING DIAGRAM
Three comparisons worth keeping separate.
(private workspace)P179 / Concept — not physical geometry
Three coupler pairs · role & heat
Editorial comparison of six named manufacturer examples, not a standardized IEC mating diagram
two-label paired taxonomy · Concept only
High-level reader taxonomy: cold/hot are part labels; not safety or mate approvals
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)C13 / C14 are the standard-temperature examples here. C15 / C16 are the hot-condition examples. C19 / C20 are the larger standard-temperature examples. These source-scoped labels do not establish any specific installed cordset or safe thermal/electrical load.
SIX VISUALLY INSPECTED MANUFACTURER DOCUMENTS
Physical form studies. Not gauges.
(private workspace)P179 / Source-observed physical study
IEC C13 · cord
SCHURTER 4782 / 4782.0000
simplified manufacturer product-photo exterior · Cord connector
Named SCHURTER exterior example only, not exact gauge geometry or licensed assembly illustration.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P180 / Source-observed physical study
IEC C14 · inlet
SCHURTER 6100-3 / 6100.3200
simplified manufacturer product-photo exterior · Appliance inlet
Named SCHURTER exterior example only, not exact gauge geometry or licensed assembly illustration.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P181 / Source-observed physical study
IEC C15 · cord
SCHURTER 4781 / 4781.0000
simplified manufacturer product-photo exterior · Cord connector
Named SCHURTER exterior example only, not exact gauge geometry or licensed assembly illustration.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P182 / Source-observed physical study
IEC C16 · inlet
SCHURTER 6110-4 / 6110.4215
simplified manufacturer product-photo exterior · Appliance inlet
Named SCHURTER exterior example only, not exact gauge geometry or licensed assembly illustration.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P183 / Source-observed physical study
IEC C19 · cord
SCHURTER 4795 / 4795.0000
simplified manufacturer product-photo exterior · Cord connector
Named SCHURTER exterior example only, not exact gauge geometry or licensed assembly illustration.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)
(private workspace)P184 / Source-observed physical study
IEC C20 · inlet
SCHURTER 4793 / 4793.3000
simplified manufacturer product-photo exterior · Appliance inlet
Named SCHURTER exterior example only, not exact gauge geometry or licensed assembly illustration.
Not to scale. Technical and rights review pending.
Inspect view & provenance (private workspace)Manufacturer photographs were inspected, but the original artwork is deliberately less precise than an IEC mating-standard sheet. Inspect the named part and its original document before using any specification.
ONE QUESTION PER COMPONENT / SOURCES IN CONTEXT
Read the name. Check the other half.
C13 / Cord connector / S584
IEC C13 — SCHURTER 4782 / 4782.0000
Observed: Rewireable straight cord connector; not a complete certified cordset. Manufacturer classification: 70°C source example.
Complementary designation: IEC C14 is identified in the manufacturer's mating-product references; this does not certify a whole cordset.
What to check: Confirm the exact cord assembly, appliance inlet and equipment nameplate.
Still unknown: Country plug, installed lead rating, exact mating variant and equipment approval.
Inspect source-scoped illustration and exclusions → (private workspace)
Three canonical claims and source PDF
C179B · C179C · C179D · S584 · SCHURTER PDF ↗
Linked manufacturer page, observed 13 October 2026; art is original and deliberately simplified. Independent electrical/technical and rights approval remains pending.
C14 / Appliance inlet / S585
IEC C14 — SCHURTER 6100-3 / 6100.3200
Observed: Screw-mounted equipment inlet, not a cord connector. Manufacturer classification: 70°C source example.
Complementary designation: IEC C13 is identified in the manufacturer's mating-product references; this does not certify a whole cordset.
What to check: Read equipment inlet designation and nameplate; inspect whether sealing kit is present.
Still unknown: Equipment rating, sealing status of the installed variant and approved cordset.
Inspect source-scoped illustration and exclusions → (private workspace)
Three canonical claims and source PDF
C180B · C180C · C180D · S585 · SCHURTER PDF ↗
Linked manufacturer page, observed 13 October 2026; art is original and deliberately simplified. Independent electrical/technical and rights approval remains pending.
C15 / Hot-condition cord connector / S586
IEC C15 — SCHURTER 4781 / 4781.0000
Observed: Rewireable hot-condition cord-side component with a 120°C pin-temperature classification. Manufacturer classification: 120°C source example.
Complementary designation: IEC C16 is identified in the manufacturer's mating-product references; this does not certify a whole cordset.
What to check: Check appliance requirements and source-defined hot-condition cordset, not just shape.
Still unknown: Installed cable heat rating, regional plug, assembled cordset safety.
Inspect source-scoped illustration and exclusions → (private workspace)
Three canonical claims and source PDF
C181B · C181C · C181D · S586 · SCHURTER PDF ↗
Linked manufacturer page, observed 13 October 2026; art is original and deliberately simplified. Independent electrical/technical and rights approval remains pending.
C16 / Hot-condition appliance inlet / S587
IEC C16 — SCHURTER 6110-4 / 6110.4215
Observed: Equipment-side hot-condition inlet; snap-in panel mounting is a component variation. Manufacturer classification: 120°C source example.
Complementary designation: IEC C15 is identified in the manufacturer's mating-product references; this does not certify a whole cordset.
What to check: Confirm exact mounted inlet, appliance temperature needs and appropriate assembled cord.
Still unknown: Final mounting cutout, exact device thermal rating and assembled cord compliance.
Inspect source-scoped illustration and exclusions → (private workspace)
Three canonical claims and source PDF
C182B · C182C · C182D · S587 · SCHURTER PDF ↗
Linked manufacturer page, observed 13 October 2026; art is original and deliberately simplified. Independent electrical/technical and rights approval remains pending.
C19 / Larger cord connector / S588
IEC C19 — SCHURTER 4795 / 4795.0000
Observed: Rewireable larger IEC cold-condition cord connector, not a NEMA mains plug. Manufacturer classification: 70°C source example.
Complementary designation: IEC C20 is identified in the manufacturer's mating-product references; this does not certify a whole cordset.
What to check: Check exact C20 inlet, installed cable and regional supply plug rating.
Still unknown: Cable assembly ampacity, installed equipment load and regional plug certification.
Inspect source-scoped illustration and exclusions → (private workspace)
Three canonical claims and source PDF
C183B · C183C · C183D · S588 · SCHURTER PDF ↗
Linked manufacturer page, observed 13 October 2026; art is original and deliberately simplified. Independent electrical/technical and rights approval remains pending.
C20 / Larger appliance inlet / S589
IEC C20 — SCHURTER 4793 / 4793.3000
Observed: Larger snap-in equipment inlet; the C24 option is not the same exact variant. Manufacturer classification: 70°C source example.
Complementary designation: IEC C19 is identified in the manufacturer's mating-product references; this does not certify a whole cordset.
What to check: Verify equipment inlet marking, protection-class variant and cordset documentation.
Still unknown: Installed terminal option, full appliance approval and final cordset compliance.
Inspect source-scoped illustration and exclusions → (private workspace)
Three canonical claims and source PDF
C184B · C184C · C184D · S589 · SCHURTER PDF ↗
Linked manufacturer page, observed 13 October 2026; art is original and deliberately simplified. Independent electrical/technical and rights approval remains pending.
Separate standards layers: IEC 60320-1:2021 describes general appliance-coupler requirements. The actual standard sheets and gauges reside separately in IEC 60320-3, not in the public summary. S590 · IEC official abstract ↗. No IEC dimensional sheets have been acquired for V141.
BENCH REFERENCE / ORIGINAL EDITORIAL WORK
Keep the six roles together.
A print-friendly two-page reference with manufacturer examples, companion designations and explicit missing approvals. It is not a rating table or wiring chart.
Print Letter edition (2 pages) ↓ (legacy download held for current evidence review). Current focused printable references · Print A4 edition (2 pages) ↓ (legacy download held for current evidence review). Current focused printable references
EDITORIAL SAFETY BOUNDARY
Identity is not permission to connect.
Unknown for any real installation: the appliance nameplate/rating, exact cordset and country plug, cable construction, temperature requirements, electrical load, approvals and appliance or enclosure installation conditions. No generic pinout, wiring advice, adapter approval, dimensional gauge or safe-fit guarantee follows from this guide.
The older exact-image requests for P190, P192, P193, P260 (Molex 2191161161) remain open. Technical, source-image-rights, historical-regression and publication reviews are still outstanding. Check the updated gap queue → · Open the Visual Atlas →