FIELD GUIDESource-led reference
Port & Cable

P182 / Power / Connector

IEC 60320 C16 hot-condition appliance inlet

IEC 60320 C16 is the appliance-inlet side of the C15/C16 hot-condition appliance-coupler pairing.

Also called C16 IEC C16 hot condition inlet

A similar IEC outline does not establish that a C13 cord connector is the intended mating part.

Look for

Read the inlet designation and appliance documentation before choosing the mating cord connector.

Claim inspection dates: 2026-10-05, 2026-10-13, 2026-10-22 · Independent review pending

IEC 60320 C16 hot-condition appliance inlet: three-quarter view. Computer-generated illustration, not a photograph.

Three-quarter view Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.

IEC 60320 C16 hot-condition appliance inlet: mating face. Computer-generated illustration, not a photograph.

Mating face Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.

IEC 60320 C16 hot-condition appliance inlet: fitted in place. Computer-generated illustration, not a photograph.

Fitted in place Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.

IEC 60320 C16 hot-condition appliance inlet: original recognition drawing, not to scale.

Recognition drawing Original schematic, not to scale. Drawing review pending.

Image inspection / P182

See the view. Check its scope.

1 registered view for this reference. Different part examples are not automatically mates; all remain not to scale and independently unapproved.

Original qualitative, deliberately simplified exterior for SCHURTER 6110-4 / 6110.4215; IEC C16 Hot-condition appliance inlet, 120°C source example. No gauge shape, wiring or safe-fit approval. (private workspace)

P182 / Source-observed physical study

IEC C16 · inlet

SCHURTER 6110-4 / 6110.4215

simplified manufacturer product-photo exterior · Appliance inlet

Not to scale. Technical and rights review pending.

Inspect view & provenance (private workspace)

The useful distinction

Recognize it. Then verify it.

IEC 60320 C16 is the appliance-inlet side of the C15/C16 hot-condition appliance-coupler pairing. [C182A]

SCHURTER 6110-4 is catalogued as an IEC C16 hot-condition appliance inlet; the observed product photos and datasheet identify an equipment-side component, not both ends of a mains cord. [C182B]

The SCHURTER 6110-4 datasheet identifies a 120°C pin-temperature classification; this is a part/series rating under documented conditions, not an automatic rating for an appliance, installed cord or alternate product. [C182C]

SCHURTER's documented IEC C16 product family identifies the complementary C15 form in the cited mating-product references. Confirm the actual variants and full installed equipment/cordset documentation; no safe-fit or cable-load approval follows solely from that relationship. [C182D]

Exact source example 6110.4215: construction: Front snap-in inlet for1.5 mm panel; 4.8 x0.8 mm quick-connect terminals; protection class I. pin temperature c: 120. rating: IEC10 A; UL/CSA15 A at250 VAC. Exact listed order number; regional ratings remain distinct. No physical compatibility, pin map or hardware validation is established. [C182E]

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Connector roleplug (6110.4215)S587Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6110.4215. Documented role: plug. Full PDF text read; direct download403. Diagram numbers have no verified axes here; no geometry or visible specimen marking proposed.
ManufacturerSCHURTER (6110.4215)S587Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6110.4215. Documented role: plug. Full PDF text read; direct download403. Diagram numbers have no verified axes here; no geometry or visible specimen marking proposed.
Series6110-4 (6110.4215)S587Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6110.4215. Documented role: plug. Full PDF text read; direct download403. Diagram numbers have no verified axes here; no geometry or visible specimen marking proposed.
Exact part / implementation6110.4215 (6110.4215)S587Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6110.4215. Documented role: plug. Full PDF text read; direct download403. Diagram numbers have no verified axes here; no geometry or visible specimen marking proposed.

Not recorded: Nominal contacts, Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Mounting, Coupling / latch, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Report a correction to these facts →

Bounded facts, visible unknowns

Specifications and limits

IEC 60320 C16 hot-condition appliance inlet facts and limitations
Documented identificationHot-condition appliance inlet paired with C15. [C182A]
Observed manufacturer exampleSCHURTER 6110-4 / 6110.4215 · Hot-condition appliance inlet · 120°C source example. Specific product family only; not a full cordset or installed device rating. [C182B] [C182C]
Example mating designationC16 / C15 pair listed in manufacturer references; select only with complete product and appliance documentation. [C182D]
Mechanical dimensionsNo independently reviewed mechanical drawing in V36; do not use this page for fabrication, fit testing or tolerance work.
Engineering pinoutSource-checked engineering profile available; independent review pending. Open engineering profile →
Verified device listNot included. Check exact device and accessory documentation.
No electrical replacement approval.

Use the source-backed form or position count only for identification. Resolve ratings, protocol, direction, wiring, cable construction and exact device support from the relevant equipment and component documentation.

Before you connect

What to check

  1. Identify the exact connector family and variant from the equipment or cable documentation.
  2. Keep shape, contact count, protocol, electrical rating and device support as separate facts.
  3. Do not force, rewire or adapt a connector from this recognition record; resolve the remaining requirements first.
Trace a supported connection class →

What is not established

This field note does not approve a connection, adapter, cable assembly, rewiring scheme or fabricated part. It intentionally omits unsupported pin assignments and mechanical tolerances.

V141 manufacturer example and safe interpretation

Equipment-side hot-condition inlet; snap-in panel mounting is a component variation. Confirm exact mounted inlet, appliance temperature needs and appropriate assembled cord. Not established: Final mounting cutout, exact device thermal rating and assembled cord compliance. Refer to source S587; no wiring, electrical installation or fit is certified.

Your next step

Move from the form to the requirement.

Read the engineering reference Source-scoped details, orientation and explicit unknowns.Work through a connection Choose your task before deciding on a cable.Explore this evidence trail Inspect the claims and their dependencies. (private workspace)

The source trail

Evidence for this page

AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.

Back to first citation ↑
C182ASource checked · pending review

Interpower identifies C16 as the appliance-inlet side of the C15/C16 IEC 60320 hot-condition appliance-coupler pairing.

Interpower · IEC 60320 appliance couplers — featured product overview ↗

Locator: IEC 60320 appliance coupler product families and mating-pair overview
Access: public page. Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.

S195: full source recordInspect review dependencies → (private workspace)

Claim scope: V36 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction or end-to-end compatibility proof.. Next review due 2027-01-03.

Back to first citation ↑
C182BSource checked · pending review

SCHURTER 6110-4 is catalogued as an IEC C16 hot-condition appliance inlet; the observed product photos and datasheet identify an equipment-side component, not both ends of a mains cord.

SCHURTER · SCHURTER 6110-4 / 6110.4215 — IEC C16 manufacturer datasheet ↗

Locator: PDF p.1 snap-in inlet and hot-condition 120°C; p.3 mating connectors 4781/4784; visually inspected p.1 product photo.
Access: public pdf text. Variant-specific geometry and ratings. Not a generic IEC designation approval, safe mating rule, wiring map, cordset certification or fabrication dimension.

S587: full source recordInspect review dependencies → (private workspace)

Claim scope: V141 manufacturer-specific IEC mains connector identity, coupling-family example, and thermal classification. NOT installation, cordset approval, dimension, pinout, universal fit, regional plug rating or safe electrical use.. Next review due 2027-01-11.

Back to first citation ↑
C182CSource checked · pending review

The SCHURTER 6110-4 datasheet identifies a 120°C pin-temperature classification; this is a part/series rating under documented conditions, not an automatic rating for an appliance, installed cord or alternate product.

SCHURTER · SCHURTER 6110-4 / 6110.4215 — IEC C16 manufacturer datasheet ↗

Locator: PDF p.1 snap-in inlet and hot-condition 120°C; p.3 mating connectors 4781/4784; visually inspected p.1 product photo.
Access: public pdf text. Variant-specific geometry and ratings. Not a generic IEC designation approval, safe mating rule, wiring map, cordset certification or fabrication dimension.

S587: full source recordInspect review dependencies → (private workspace)

Claim scope: V141 manufacturer-specific IEC mains connector identity, coupling-family example, and thermal classification. NOT installation, cordset approval, dimension, pinout, universal fit, regional plug rating or safe electrical use.. Next review due 2027-01-11.

Back to first citation ↑
C182DSource checked · pending review

SCHURTER's documented IEC C16 product family identifies the complementary C15 form in the cited mating-product references. Confirm the actual variants and full installed equipment/cordset documentation; no safe-fit or cable-load approval follows solely from that relationship.

SCHURTER · SCHURTER 6110-4 / 6110.4215 — IEC C16 manufacturer datasheet ↗

Locator: PDF p.1 snap-in inlet and hot-condition 120°C; p.3 mating connectors 4781/4784; visually inspected p.1 product photo.
Access: public pdf text. Variant-specific geometry and ratings. Not a generic IEC designation approval, safe mating rule, wiring map, cordset certification or fabrication dimension.

S587: full source recordInspect review dependencies → (private workspace)

Claim scope: V141 manufacturer-specific IEC mains connector identity, coupling-family example, and thermal classification. NOT installation, cordset approval, dimension, pinout, universal fit, regional plug rating or safe electrical use.. Next review due 2027-01-11.

Back to first citation ↑
C182ESource checked · pending review

Exact source example 6110.4215: construction: Front snap-in inlet for1.5 mm panel; 4.8 x0.8 mm quick-connect terminals; protection class I. pin temperature c: 120. rating: IEC10 A; UL/CSA15 A at250 VAC. Exact listed order number; regional ratings remain distinct. No physical compatibility, pin map or hardware validation is established.

SCHURTER · SCHURTER 6110-4 / 6110.4215 — IEC C16 manufacturer datasheet ↗

Locator: PDF p.1 snap-in inlet and hot-condition 120°C; p.3 mating connectors 4781/4784; visually inspected p.1 product photo.
Access: public pdf text. Variant-specific geometry and ratings. Not a generic IEC designation approval, safe mating rule, wiring map, cordset certification or fabrication dimension.

S587: full source recordInspect review dependencies → (private workspace)

Claim scope: Exact named component/family technical construction reference from the full current primary document; geometry, ratings and implementation limits do not transfer to other variants.. Next review due 2027-01-20.

Suggest a correction to this field note →

Put this field note to work.

Add to discovery trayRecord an unsaved candidate (private workspace)

Compare look-alikes: IEC C14 versus C16 appliance inlets · IEC 60320 C16 versus C16A inlets

Candidate selection does not confirm the identity or capabilities of your physical item.

Evidence behind this page

Scope first. Source second. Approval separate.

2 linked sources · 5 scoped claims · 0 sources with inspection/access flags.

Page scope: catalogue_expansion_v36; v141_iec_manufacturer_comparison

Assessment 2026-10-22 · earliest scheduled source review 2027-01-03. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 2 source scopes, access limits and dates

S195 · IEC 60320 appliance couplers — featured product overview

Interpower · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Identifies common IEC 60320 C13/C14, C15/C16 and C19/C20 connector/inlet pairings and distinguishes the cord connector from the appliance inlet.

Not established / limitations: Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.

Locator: IEC 60320 appliance coupler product families and mating-pair overview

S587 · SCHURTER 6110-4 / 6110.4215 — IEC C16 manufacturer datasheet

SCHURTER · Manufacturer / product-owner domain · inspected 2026-10-13 · due 2027-01-11

Within inspection window

Scoped support: Specific named rewireable connector or panel inlet; identification and manufacturer variant details, not a full cable/device approval or standardized geometry.

Not established / limitations: Variant-specific geometry and ratings. Not a generic IEC designation approval, safe mating rule, wiring map, cordset certification or fabrication dimension.

Locator: PDF p.1 snap-in inlet and hot-condition 120°C; p.3 mating connectors 4781/4784; visually inspected p.1 product photo.

Trace 5 claims to their source records

C182A · P182

Interpower identifies C16 as the appliance-inlet side of the C15/C16 IEC 60320 hot-condition appliance-coupler pairing.

Claim scope: V36 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction or end-to-end compatibility proof.

Source links: S195 · Evidence trail → (private workspace)

C182B · P182

SCHURTER 6110-4 is catalogued as an IEC C16 hot-condition appliance inlet; the observed product photos and datasheet identify an equipment-side component, not both ends of a mains cord.

Claim scope: V141 manufacturer-specific IEC mains connector identity, coupling-family example, and thermal classification. NOT installation, cordset approval, dimension, pinout, universal fit, regional plug rating or safe electrical use.

Source links: S587 · Evidence trail → (private workspace)

C182C · P182

The SCHURTER 6110-4 datasheet identifies a 120°C pin-temperature classification; this is a part/series rating under documented conditions, not an automatic rating for an appliance, installed cord or alternate product.

Claim scope: V141 manufacturer-specific IEC mains connector identity, coupling-family example, and thermal classification. NOT installation, cordset approval, dimension, pinout, universal fit, regional plug rating or safe electrical use.

Source links: S587 · Evidence trail → (private workspace)

C182D · P182

SCHURTER's documented IEC C16 product family identifies the complementary C15 form in the cited mating-product references. Confirm the actual variants and full installed equipment/cordset documentation; no safe-fit or cable-load approval follows solely from that relationship.

Claim scope: V141 manufacturer-specific IEC mains connector identity, coupling-family example, and thermal classification. NOT installation, cordset approval, dimension, pinout, universal fit, regional plug rating or safe electrical use.

Source links: S587 · Evidence trail → (private workspace)

C182E · P182

Exact source example 6110.4215: construction: Front snap-in inlet for1.5 mm panel; 4.8 x0.8 mm quick-connect terminals; protection class I. pin temperature c: 120. rating: IEC10 A; UL/CSA15 A at250 VAC. Exact listed order number; regional ratings remain distinct. No physical compatibility, pin map or hardware validation is established.

Claim scope: Exact named component/family technical construction reference from the full current primary document; geometry, ratings and implementation limits do not transfer to other variants.

Source links: S587 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.