FIELD GUIDESource-led reference

P145 / Ethernet and PoE / Guide

PoE budget: reserved output is not device draw

A documented model, port role, rate or budget is not a verified physical connection.

The useful distinction

Read the exact model and port labels; do not infer network or power capabilities from the modular outline.

Claim inspection dates: 2026-10-03 · Independent review pending

Guide note · not an individual product specification

The useful distinction

Understand the requirement.

Build a conservative source-side reservation scenario without confusing it with measured consumption or an installation guarantee. [C145A]

The exact G5 Bullet page states 4 W consumption; the general Ubiquiti availability page states 5 W. The conflict is unresolved. [C145B]

Bounded facts, visible unknowns

Specifications and limits

PoE budget: reserved output is not device draw facts and limitations
Workflow boundaryCopper Ethernet / af and at documentation only [C145A] [C145B]
Verified device listNot included. Check exact device and accessory documentation.
A boundary, not an omission to guess around.

Each selected af endpoint reserves 15,400 mW; each at endpoint reserves 30,000 mW. Counts are integers and the total is calculated in milliwatts. This intentionally conservative reservation does not claim to reproduce a switch's live allocation, classification, negotiation or power management.

Before you connect

What to check

  1. Use source-side units consistently.
  2. Check total, port count and per-port ceiling.
  3. Keep arithmetic separate from live operation.
Trace a supported connection class →

Three independent constraints

Check the source's total documented PoE output, number of available powered ports and per-port limit. A positive total balance does not resolve too many endpoints or a per-port requirement the source cannot document. Optional headroom is your stated scenario input, not a recommended safety margin.

Keep unresolved evidence visible

The exact G5 Bullet page states 4 W while a general Ubiquiti table states 5 W. That conflict remains visible. Neither figure drives this tool's af reservation. A mathematically fitting scenario is still subject to source review, exact hardware/supply checks, actual port state and independent installation assessment.

Your next step

Move from the form to the requirement.

The source trail

Evidence for this page

AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.

C145ASource checked · pending review

The af scenario reserves 15.4 W at the source, while the cited device-side maximum is 12.95 W. The at scenario reserves 30 W at the source, with a cited device-side maximum of 25.5 W. Cable delivery losses are one reason the boundaries differ. Do not subtract a device-only figure from a source budget and label the result certified capacity.

Ubiquiti · PoE Availability and Modes ↗

Locator: PoE Modes: Type 1 and 2 / Lite family / Physical Security consumption
Access: public page. Only af/at rows are modeled; no bt values copied. G5 Bullet consumption conflicts with the exact datasheet's 4 W and remains unresolved.

S132: full source recordCisco · Troubleshooting Power over Ethernet (PoE) ↗

Locator: Power budget / Power allocation / IEEE 802.3af powered devices
Access: public page. Historical Catalyst guidance only, not a current switch endorsement or a universal modern control algorithm. No device commands reproduced.

S133: full source recordCisco · Verify PoE Power Source Standard on WAP571/WAP571E ↗

Locator: Introduction / IEEE 802.3af and IEEE 802.3at
Access: public page. Historical exact-product guidance, not current model certification or an installation procedure for the devices in this catalog.

S134: full source recordUbiquiti · G5 Bullet technical specifications ↗

Locator: Networking Interface / Hardware: Max. Power Consumption, Power Method
Access: public page. The same publisher's general availability page lists 5 W instead. Both statements are retained as an unresolved conflict; neither is substituted into the source-reservation worksheet.

S129: full source recordInspect review dependencies → (private workspace)

Claim scope: Dated network reference; exact product scope where named. Documentation only; independent review pending.. Next review due 2027-01-01.

C145BSource checked · pending review

The exact G5 Bullet page states 4 W consumption; the general Ubiquiti availability page states 5 W. The conflict is unresolved.

Ubiquiti · PoE Availability and Modes ↗

Locator: PoE Modes: Type 1 and 2 / Lite family / Physical Security consumption
Access: public page. Only af/at rows are modeled; no bt values copied. G5 Bullet consumption conflicts with the exact datasheet's 4 W and remains unresolved.

S132: full source recordCisco · Troubleshooting Power over Ethernet (PoE) ↗

Locator: Power budget / Power allocation / IEEE 802.3af powered devices
Access: public page. Historical Catalyst guidance only, not a current switch endorsement or a universal modern control algorithm. No device commands reproduced.

S133: full source recordCisco · Verify PoE Power Source Standard on WAP571/WAP571E ↗

Locator: Introduction / IEEE 802.3af and IEEE 802.3at
Access: public page. Historical exact-product guidance, not current model certification or an installation procedure for the devices in this catalog.

S134: full source recordUbiquiti · G5 Bullet technical specifications ↗

Locator: Networking Interface / Hardware: Max. Power Consumption, Power Method
Access: public page. The same publisher's general availability page lists 5 W instead. Both statements are retained as an unresolved conflict; neither is substituted into the source-reservation worksheet.

S129: full source recordInspect review dependencies → (private workspace)

Claim scope: Dated network reference; exact product scope where named. Documentation only; independent review pending.. Next review due 2027-01-01.

Suggest a correction to this field note →

Take the reference into a network worksheet.

Compare exact Ethernet interfaces and power roles, or build an explicit source-side af/at reservation scenario.

Evidence behind this page

Scope first. Source second. Approval separate.

4 linked sources · 2 scoped claims · 0 sources with inspection/access flags.

Page scope: consumer_reference_expansion

Assessment 2026-10-22 · earliest scheduled source review 2027-01-01. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 4 source scopes, access limits and dates

S129 · G5 Bullet technical specifications

Ubiquiti · Manufacturer / product-owner domain · inspected 2026-10-03 · due 2027-01-01

Within inspection window

Scoped support: The exact UVC-G5-Bullet page lists a 10/100 Mbps RJ45 interface, PoE power and 4 W maximum consumption.

Not established / limitations: The same publisher's general availability page lists 5 W instead. Both statements are retained as an unresolved conflict; neither is substituted into the source-reservation worksheet.

Locator: Networking Interface / Hardware: Max. Power Consumption, Power Method

S132 · PoE Availability and Modes

Ubiquiti · Manufacturer / product-owner domain · inspected 2026-10-03 · due 2027-01-01

Within inspection window

Scoped support: The Type 1 and 2 rows distinguish source-side limits of 15.4 W and 30 W from device-side values of 12.95 W and 25.5 W. The Lite family table includes af and at. The G5 Bullet consumption row states 5 W.

Not established / limitations: Only af/at rows are modeled; no bt values copied. G5 Bullet consumption conflicts with the exact datasheet's 4 W and remains unresolved.

Locator: PoE Modes: Type 1 and 2 / Lite family / Physical Security consumption

S133 · Troubleshooting Power over Ethernet (PoE)

Cisco · Manufacturer / product-owner domain · inspected 2026-10-03 · due 2027-01-01

Within inspection window

Scoped support: Historical Catalyst guidance distinguishes power reserved by the source from device consumption and describes cable losses and changing allocations.

Not established / limitations: Historical Catalyst guidance only, not a current switch endorsement or a universal modern control algorithm. No device commands reproduced.

Locator: Power budget / Power allocation / IEEE 802.3af powered devices

S134 · Verify PoE Power Source Standard on WAP571/WAP571E

Cisco · Manufacturer / product-owner domain · inspected 2026-10-03 · due 2027-01-01

Within inspection window

Scoped support: Historical WAP571/WAP571E guidance distinguishes the 12.95 W and 25.5 W device-side maxima of af and at from source-side power.

Not established / limitations: Historical exact-product guidance, not current model certification or an installation procedure for the devices in this catalog.

Locator: Introduction / IEEE 802.3af and IEEE 802.3at

Trace 2 claims to their source records

C145A · P145

The af scenario reserves 15.4 W at the source, while the cited device-side maximum is 12.95 W. The at scenario reserves 30 W at the source, with a cited device-side maximum of 25.5 W. Cable delivery losses are one reason the boundaries differ. Do not subtract a device-only figure from a source budget and label the result certified capacity.

Claim scope: Dated network reference; exact product scope where named. Documentation only; independent review pending.

Source links: S132 · S133 · S134 · S129 · Evidence trail → (private workspace)

C145B · P145

The exact G5 Bullet page states 4 W consumption; the general Ubiquiti availability page states 5 W. The conflict is unresolved.

Claim scope: Dated network reference; exact product scope where named. Documentation only; independent review pending.

Source links: S132 · S133 · S134 · S129 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.