Guide note · not an individual product specification
The useful distinction
Understand the requirement.
A switch family name is not enough when a mode changes the selected ports' documented rate. [C147A]
In the inspected TL-SG1005P V5 documentation, Extend mode affects ports 1–2. In the TL-SF1005P V5 documentation, it affects ports 1–4. The affected groups are limited to 10 Mbps in this mode. Other groups are not automatically relabeled as extended. [C147B]
Bounded facts, visible unknowns
Specifications and limits
Extend mode and hardware revisions change the question facts and limitations
Workflow boundary
Copper Ethernet / af and at documentation only [C147A][C147B]
Verified device list
Not included. Check exact device and accessory documentation.
A boundary, not an omission to guess around.
In the inspected TL-SG1005P V5 documentation, Extend mode affects ports 1–2. In the TL-SF1005P V5 documentation, it affects ports 1–4. The affected groups are limited to 10 Mbps in this mode. Other groups are not automatically relabeled as extended.
For an affected group the worksheet starts with the mode unknown. It does not report a numeric shared-rate conclusion until you explicitly record Normal or Extend. Selecting Normal is an observation input, not a statement that the application inspected or changed a switch.
Do not turn marketing reach into approval
The worksheet does not compute usable cable length or certify extended-distance operation. Cable condition, installation, environmental factors and exact product instructions still require review. It never sends a configuration command.
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
C147ASource checked · pending review
TL-SG1005P US V5 and TL-SF1005P US V5 are separate exact profiles. Do not apply one revision's power budget, affected port numbering or mode behavior to another revision. An unversioned product URL can change; the dated inspection records the revision that was visible.
Locator: Specifications / Interface, PoE Ports, Advanced Features Access: public page. Budget is manufacturer-reported under stated conditions, not measured output. Extend mode must be inspected on the actual unit.
Locator: V5 model heading / Interface, PoE Ports, Advanced Features Access: public page. Dated V5 capture from an unversioned URL; a future page may describe another revision. Not a distance or installation approval.
Claim scope: Dated network reference; exact product scope where named. Documentation only; independent review pending.. Next review due 2027-01-01.
C147BSource checked · pending review
In the inspected TL-SG1005P V5 documentation, Extend mode affects ports 1–2. In the TL-SF1005P V5 documentation, it affects ports 1–4. The affected groups are limited to 10 Mbps in this mode. Other groups are not automatically relabeled as extended.
Locator: Specifications / Interface, PoE Ports, Advanced Features Access: public page. Budget is manufacturer-reported under stated conditions, not measured output. Extend mode must be inspected on the actual unit.
Locator: V5 model heading / Interface, PoE Ports, Advanced Features Access: public page. Dated V5 capture from an unversioned URL; a future page may describe another revision. Not a distance or installation approval.
Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Assessment 2026-10-22 · earliest scheduled source review 2027-01-01. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Scoped support: The US V5 page lists five 10/100/1000 Mbps ports; ports 1–4 provide af/at PoE, with 30 W per port and 65 W total. Extend mode affects ports 1–2 and limits their rate to 10 Mbps.
Not established / limitations: Budget is manufacturer-reported under stated conditions, not measured output. Extend mode must be inspected on the actual unit.
Locator: Specifications / Interface, PoE Ports, Advanced Features
Scoped support: The inspected US page identifies V5 and lists five 10/100 Mbps ports. Ports 1–4 provide af/at power, 30 W per port and 67 W total; Extend mode limits these ports to 10 Mbps.
Not established / limitations: Dated V5 capture from an unversioned URL; a future page may describe another revision. Not a distance or installation approval.
Locator: V5 model heading / Interface, PoE Ports, Advanced Features
Trace 2 claims to their source records
C147A · P147
TL-SG1005P US V5 and TL-SF1005P US V5 are separate exact profiles. Do not apply one revision's power budget, affected port numbering or mode behavior to another revision. An unversioned product URL can change; the dated inspection records the revision that was visible.
In the inspected TL-SG1005P V5 documentation, Extend mode affects ports 1–2. In the TL-SF1005P V5 documentation, it affects ports 1–4. The affected groups are limited to 10 Mbps in this mode. Other groups are not automatically relabeled as extended.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
