FIELD GUIDESource-led reference
Port & Cable

TP-Link / D035

TP-Link TL-SG1005P V5

TL-SG1005P US V5 only; do not apply this budget or Extend-mode grouping to other revisions.

Explore this device’s exact port groups →

Exact scope

TL-SG1005P US V5 only; do not apply this budget or Extend-mode grouping to other revisions.

Exact scoped Ethernet reference only. No physical testing, live port state, general USB/display planner support or installation approval.

Source checked · human review pending

Checked 2026-10-03 · Review due 2027-01-01
Sources S122

Inspect the evidence → (private workspace)

Same connector form, different documented roles

P018: Ports 1–2 / PoE / mode-sensitive — Standards-based PoE source · Ports 3–4 / PoE — Standards-based PoE source · Port 5 / data only — Documented non-PoE data group

Do not transfer a capability from one location to another merely because the connector outline matches.

Location and role matter

Selected port groups

3 groups · not an exhaustive parts diagram

Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.

× 2
Standards based PoE source

Ports 1–2 / PoE / mode-sensitive

Documented Ethernet rates: 10 Mbps, 100 Mbps, 1000 Mbps. Extend mode changes the selected group to 10 Mbps; actual mode must be checked.

Sources S122 · Connector field note

Identification only. This port group cannot launch the scoped planner.

× 2
Standards based PoE source

Ports 3–4 / PoE

Documented Ethernet rates: 10 Mbps, 100 Mbps, 1000 Mbps. Only listed rates are captured; actual negotiation is unverified.

Sources S122 · Connector field note

Identification only. This port group cannot launch the scoped planner.

× 1
Documented non PoE data group

Port 5 / data only

Documented Ethernet rates: 10 Mbps, 100 Mbps, 1000 Mbps. Only listed rates are captured; actual negotiation is unverified.

Sources S122 · Connector field note

Identification only. This port group cannot launch the scoped planner.

Read before using the profile

  • Inspect the actual hardware revision.
  • Record Normal or Extend mode for ports 1–2; do not assume the default.
  • 65 W is the total source budget, not four simultaneous 30 W outputs.

Exact-model source trail

Sources behind this profile

These are the profile’s existing source records, with their original scope and access limitations. No new inspection or approval is implied.

S122Full source record →

TP-Link · TL-SG1005P V5 product specifications

The US V5 page lists five 10/100/1000 Mbps ports; ports 1–4 provide af/at PoE, with 30 W per port and 65 W total. Extend mode affects ports 1–2 and limits their rate to 10 Mbps.

Open source ↗

Locator: Specifications / Interface, PoE Ports, Advanced Features
Access: public page. Budget is manufacturer-reported under stated conditions, not measured output. Extend mode must be inspected on the actual unit.

Related field notes

8P8C modular connector (commonly called RJ45)An RJ45-shaped port is not always an Ethernet port. →Ethernet rates: the plug is only the beginningA documented model, port role, rate or budget is not a verified physical connection. →PoE: distinguish the source from the powered deviceA documented model, port role, rate or budget is not a verified physical connection. →
Compare this deviceChoose a task playbook →

Exact-model evidence map

What this release can actually tell you about TP-Link TL-SG1005P V5.

2 of 6 task domains contain some exact-model evidence. The others stay explicitly undocumented.

Open the full model map →
Displays & docksNot documented here

No displays & docks-specific evidence for this exact model is represented in this release.

Plan next step →Topology →
USB dataSelected-port evidence

The base device profile contains 1 selected port group relevant to this domain, but no dedicated domain profile.

Plan next step →Topology →
Memory cards & readersNot documented here

No memory cards & readers-specific evidence for this exact model is represented in this release.

Plan next step →Topology →
Ethernet & PoEDomain profile

This release contains a dedicated ethernet & poe profile for this exact device.

Plan next step →Topology →
AudioNot documented here

No audio-specific evidence for this exact model is represented in this release.

Plan next step →Topology →
Charging & powerNot documented here

No charging & power-specific evidence for this exact model is represented in this release.

Plan next step →Topology →

Derived from the existing device profile and domain catalogs. This layer adds no new hardware fact and does not infer compatibility from a missing or present cell.

Ethernet and PoE reference

TP-Link / D035

TP-Link TL-SG1005P V5

TL-SG1005P US V5 only; do not apply this budget or Extend-mode grouping to other revisions.

Ports 1–2 / PoE / mode-sensitive

10 Mbps · 100 Mbps · 1 Gbps

Power source · 802.3af / 802.3at · Inspect Normal / Extend mode

2 physical ports in this group. Auto-negotiation documented; current negotiation unknown.

Use this exact port group →

Ports 3–4 / PoE

10 Mbps · 100 Mbps · 1 Gbps

Power source · 802.3af / 802.3at

2 physical ports in this group. Auto-negotiation documented; current negotiation unknown.

Use this exact port group →

Port 5 / data only

10 Mbps · 100 Mbps · 1 Gbps

Documented data-only group

1 physical port in this group. Auto-negotiation documented; current negotiation unknown.

Use this exact port group →

65 W shared PoE output · 4 powered ports

Checked 2026-10-03 · review due 2027-01-01 · independent review pending

S122

Start a blank worksheetInspect source budget →

Evidence behind this page

Scope first. Source second. Approval separate.

1 linked sources · 0 scoped claims · 0 sources with inspection/access flags.

Page scope: TL-SG1005P US V5 only; do not apply this budget or Extend-mode grouping to other revisions.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-01. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 1 source scopes, access limits and dates

S122 · TL-SG1005P V5 product specifications

TP-Link · Manufacturer / product-owner domain · inspected 2026-10-03 · due 2027-01-01

Within inspection window

Scoped support: The US V5 page lists five 10/100/1000 Mbps ports; ports 1–4 provide af/at PoE, with 30 W per port and 65 W total. Extend mode affects ports 1–2 and limits their rate to 10 Mbps.

Not established / limitations: Budget is manufacturer-reported under stated conditions, not measured output. Extend mode must be inspected on the actual unit.

Locator: Specifications / Interface, PoE Ports, Advanced Features

Trace 0 claims to their source records

No central claims on this surface. Exact-device assertions and explicit source links remain in the original profile above and in the reviewer packet.

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.