Blackmagic Design / D082

Blackmagic ATEM Mini Pro ISO

Separate four HDMI inputs from one HDMI program output, then check the single USB-C interface’s documented task.

Explore this device’s exact port groups →

Exact scope

ATEM Mini Pro ISO, product specification W-APS-15 only; not ATEM Mini Pro, Extreme ISO, G2 or other ATEM models.

Selected USB and HDMI port groups only; not a complete physical inventory, firmware qualification or measured performance report. Counts follow the exact manufacturer documentation. No inferred physical location or independent hardware review.

Source checked · human review pending

Checked 2026-10-08 · Review due 2027-01-06
Sources S453

Inspect the evidence →

Same connector form, different documented roles

HDMI: HDMI inputs 1–4 — Video inputs from sources · HDMI program output — Program video output

Do not transfer a capability from one location to another merely because the connector outline matches.

Understand this device’s port roles

Location and role matter

Selected port groups

3 groups · not an exhaustive parts diagram

Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.

× 4

Video inputs from sources

HDMI inputs 1–4

Four HDMI Type A inputs are documented. The Standards table lists no Ultra HD video standards; the finishing-in-Ultra-HD description does not establish a live Ultra HD HDMI path.

Sources S453 · Connector field note

Identification only. This port group cannot launch the scoped planner.

× 1

Program video output

HDMI program output

One HDMI program output is specified and shown on the labeled panel diagram. The separate total-outputs value of two is not a count of two HDMI output sockets.

Sources S453 · Connector field note

Identification only. This port group cannot launch the scoped planner.

× 1

Recording / webcam output / control interface

USB-C computer interface

One USB Type-C 3.1 Gen 1 interface is listed for external-drive recording, webcam output, software control, updates and panel connection. This list does not establish simultaneous webcam and external-drive recording.

Sources S453 · Connector field note

Identification only. This port group cannot launch the scoped planner.

Read before using the profile

Selected HDMI/USB groups only. Ethernet, analog audio and DC power remain outside the selected inventory.
The combined manufacturer website contains multiple models; this profile uses the model-specific Pro ISO PDF, not a neighboring product section.
An external-drive recording role and a webcam-output role listed for the same socket do not prove both are available at once.
No Ultra HD video standard is listed for this exact model. Post-production relinking is a different scope, not a live port capability.

Exact-model source trail

Sources behind this profile

These are the profile’s existing source records, with their original scope and access limitations. No new inspection or approval is implied.

S453Full source record →

Blackmagic Design · Blackmagic ATEM Mini Pro ISO — Product Technical Specifications

Four HDMI Type A inputs, one HDMI program output, one USB-C interface; no Ultra HD video standards.

Open source ↗

Locator: Model-specific PDF pages 1–2: Connections, labeled panel diagram, Standards
Access: public pdf text. Exact ATEM Mini Pro ISO, not Pro, Extreme, G2 or sibling products on the combined website. Total outputs is not HDMI-output count. USB mode list alone does not establish simultaneous webcam and external recording.

Related field notes

Compare this deviceChoose a task playbook →

Exact-model evidence map

What this release can actually tell you about Blackmagic ATEM Mini Pro ISO.

2 of 6 task domains contain some exact-model evidence. The others stay explicitly undocumented.

Open the full model map →

Displays & docksSelected-port evidence

The base device profile contains 2 selected port groups relevant to this domain, but no dedicated domain profile.

Plan next step →Topology →

USB dataSelected-port evidence

The base device profile contains 1 selected port group relevant to this domain, but no dedicated domain profile.

Plan next step →Topology →

Memory cards & readersNot documented here

No memory cards & readers-specific evidence for this exact model is represented in this release.

Plan next step →Topology →

Ethernet & PoENot documented here

No ethernet & poe-specific evidence for this exact model is represented in this release.

Plan next step →Topology →

AudioNot documented here

No audio-specific evidence for this exact model is represented in this release.

Plan next step →Topology →

Charging & powerNot documented here

No charging & power-specific evidence for this exact model is represented in this release.

Plan next step →Topology →

Derived from the existing device profile and domain catalogs. This layer adds no new hardware fact and does not infer compatibility from a missing or present cell.

Evidence behind this page

Scope first. Source second. Approval separate.

1 linked sources · 0 scoped claims · 0 sources with inspection/access flags.

Page scope: ATEM Mini Pro ISO, product specification W-APS-15 only; not ATEM Mini Pro, Extreme ISO, G2 or other ATEM models.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-06. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 1 source scopes, access limits and dates

S453 · Blackmagic ATEM Mini Pro ISO — Product Technical Specifications

Blackmagic Design · Unclassified publisher domain · inspected 2026-10-08 · due 2027-01-06

Within inspection window

Scoped support: Four HDMI Type A inputs, one HDMI program output, one USB-C interface; no Ultra HD video standards.

Not established / limitations: Exact ATEM Mini Pro ISO, not Pro, Extreme, G2 or sibling products on the combined website. Total outputs is not HDMI-output count. USB mode list alone does not establish simultaneous webcam and external recording.

Locator: Model-specific PDF pages 1–2: Connections, labeled panel diagram, Standards

Trace 0 claims to their source records

No central claims on this surface. Exact-device assertions and explicit source links remain in the original profile above and in the reviewer packet.

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.