Cable / adapter note · not an individual product specification
The useful distinction
Understand the requirement.
A documented passive DVI-I-source to VGA-display example, with analog-path requirements kept separate from the connector contact grid. [C333A]
The DVIVGAMF connector table identifies a DVI-I dual-link 29-contact form. That physical description does not certify implemented digital links. The inspected sheet supplies body dimensions, not a cable-reach specification or a supported-timing table. [C333B]
Bounded facts, visible unknowns
Specifications and limits
StarTech DVIVGAMF — passive DVI-I to VGA adapter facts and limitations
Evidence scope
Exact-product example; not a recommendation or inspected physical sample. [C333A]
Signal-path boundary
The documented path starts with DVI-I source equipment; passive adaptation is not evidence that a DVI-D digital output gains an analog signal. [C333A]
Verified device list
Not included. Check exact device and accessory documentation.
A boundary, not an omission to guess around.
These source-scoped examples do not verify the ports, cables, drivers or timing modes of equipment you own. No compatibility verdict or approval is granted.
Before you connect
What to check
Read the source and display port documentation.
Match the exact product model, connector form and direction.
Check auxiliary connections and operating limits independently.
Do not force connectors, probe pins or treat these references as wiring instructions.
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
C333ASource checked · pending review
StarTech DVIVGAMF is documented as a passive adapter from a computer DVI-I output to a VGA display, with a male DVI-I interface and female VGA interface. The sheet explicitly distinguishes DVI-D source equipment from this use.
Locator: Pages 1–2: intended DVI-I source path, DVI-D limitation, passive classification and connector list. Access: public pdf text. No timing limit, pin-to-pin wiring or cable reach is established; body dimensions are not cable length. No explicit revision date was present in the inspected sheet; the live locator can change.
Claim scope: DVIVGAMF intended analog source path, pages 1–2. No reverse-use certification or digital-to-analog capability is inferred.. Next review due 2027-01-05.
C333BSource checked · pending review
The DVIVGAMF connector table identifies a DVI-I dual-link 29-contact form. That physical description does not certify implemented digital links. The inspected sheet supplies body dimensions, not a cable-reach specification or a supported-timing table.
Locator: Pages 1–2: intended DVI-I source path, DVI-D limitation, passive classification and connector list. Access: public pdf text. No timing limit, pin-to-pin wiring or cable reach is established; body dimensions are not cable length. No explicit revision date was present in the inspected sheet; the live locator can change.
Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Assessment 2026-10-22 · earliest scheduled source review 2027-01-05. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Scoped support: Exact StarTech DVIVGAMF product documentation only; no class-wide or inspected-hardware certification.
Not established / limitations: No timing limit, pin-to-pin wiring or cable reach is established; body dimensions are not cable length. No explicit revision date was present in the inspected sheet; the live locator can change.
StarTech DVIVGAMF is documented as a passive adapter from a computer DVI-I output to a VGA display, with a male DVI-I interface and female VGA interface. The sheet explicitly distinguishes DVI-D source equipment from this use.
Claim scope: DVIVGAMF intended analog source path, pages 1–2. No reverse-use certification or digital-to-analog capability is inferred.
The DVIVGAMF connector table identifies a DVI-I dual-link 29-contact form. That physical description does not certify implemented digital links. The inspected sheet supplies body dimensions, not a cable-reach specification or a supported-timing table.
Claim scope: DVIVGAMF physical form versus operating evidence, page 2; no terminal assignment or fabricated cable length.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
