10 linked sources · 12 scoped claims · 0 sources with inspection/access flags.
Assessment 2026-10-22 · earliest scheduled source review 2026-12-30. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Inspect 10 source scopes, access limits and dates
Corning · Manufacturer / product-owner domain · inspected 2026-10-01 · due 2026-12-30
Within inspection window
Scoped support: Availability of LC/SC and UPC/APC variants only; original schematic geometry is pending diagram review.
Not established / limitations: Availability of LC/SC and UPC/APC variants only; original schematic geometry is pending diagram review.
Locator: Versatile Connector Options
Fluke Networks · Manufacturer / product-owner domain · inspected 2026-10-01 · due 2026-12-30
Within inspection window
Scoped support: Polish distinction, not a field testing or installation certification.
Not established / limitations: Polish distinction, not a field testing or installation certification.
Locator: UPC and APC end-face discussion
Corning · Manufacturer / product-owner domain · inspected 2026-10-08 · due 2027-01-06
Within inspection window
Scoped support: Selected LC/LC OM4 PC duplex and LC UPC/LC UPC OS2 reverse-polarity uniboot options only.
Not established / limitations: No inferred SKU, actual order availability, universal duplex polarity, connector dimensions or end-to-end reach. The filename and final-page footer differ from the repeated LAN-3921-AEN heading; the inspected revision and page locators are retained. Numerical return-loss and length-table entries are not republished.
Locator: Revision 2025-03-03; PDF pages 2 and 6 visually inspected. Page 2: reverse-polarity uniboot; page 6: LC duplex Jumper in a Box order options.
Fluke Networks · Manufacturer / product-owner domain · inspected 2026-10-08 · due 2027-01-06
Within inspection window
Scoped support: Two-fiber Tx-to-Rx continuity requirement and the warning against looking into an optical port.
Not established / limitations: No MPO pin numbering, polarity-method table, standards-edition interpretation, detector performance guarantee or installation approval is adopted. Descriptive straight-through/flipped terminology is kept source-specific.
Locator: Published 2025-11-12; End-to-End Duplex Polarity and How to Check Duplex Polarity text inspected.
Fluke Networks · Manufacturer / product-owner domain · inspected 2026-10-11 · due 2027-01-09
Within inspection window
Scoped support: Direct contact mating of unlike polishes; do not misapply this to a cord with different polishes at its separately compatible ends.
Not established / limitations: Direct contact mating of unlike polishes; do not misapply this to a cord with different polishes at its separately compatible ends. No raw HTML or manufacturer image archive is represented as retained.
Locator: APC versus UPC endface explanation and direct-mating warning; hybrid test-cord discussion
Corning · Manufacturer / product-owner domain · inspected 2026-10-11 · due 2027-01-09
Within inspection window
Scoped support: Dated family and selected order-code observations, not a current-availability claim. Physical study is the photographed multimode ST-compatible family example, not an exact order-code assignment.
Not established / limitations: Dated family and selected order-code observations, not a current-availability claim. Physical study is the photographed multimode ST-compatible family example, not an exact order-code assignment.
Locator: Revision 2018-01-22; printed pp.1, 3–4: photograph CRR1245, single-mode table, LC/SC/ST ordering rows.
Corning · Manufacturer / product-owner domain · inspected 2026-10-11 · due 2027-01-09
Within inspection window
Scoped support: Only selected part identifiers, declared form, mode and pin/key descriptions. Dimensional fields and loss ratings are not imported. The SC boot-size typo and unlabeled ferrule-size interpretation are quarantined.
Not established / limitations: Only selected part identifiers, declared form, mode and pin/key descriptions. Dimensional fields and loss ratings are not imported. The SC boot-size typo and unlabeled ferrule-size interpretation are quarantined.
Locator: May 2020; printed p.5 ST/FC rows, p.6 LC table, p.9 MT-RJ row.
Corning · Manufacturer / product-owner domain · inspected 2026-10-11 · due 2027-01-09
Within inspection window
Scoped support: Exact product record and listed kit contents; the shared family image is not an exact 95-200-99 specimen. Security-key field is not treated as absence of mechanical orientation features.
Not established / limitations: Exact product record and listed kit contents; the shared family image is not an exact 95-200-99 specimen. Security-key field is not treated as absence of mechanical orientation features.
Locator: Product heading and Package Contents. Linked UniCam family image separately inspected; no exact-part image assigned.
Corning · Manufacturer / product-owner domain · inspected 2026-10-22 · due 2027-01-20
Within inspection window
Scoped support: Exact named connector/subassembly construction and named no-logo option; keep each role separate.
Not established / limitations: Direct download403 and drawing/photo pixels unavailable. Table126/127micrometre ferrule-size values are not imported as outer ferrule diameters; unspecified SCboot3micrometre transcription is excluded. Table colors are exact-part descriptors, not general family marks.
Locator: Full18-page PDF text: p.5ST/FC/SC,p.6LCno-logo variants,p.9MT-RJ,p.11ST/FCsubassemblies,p.18revision.
AFL Hyperscale · Unclassified publisher domain · inspected 2026-10-22 · due 2027-01-20
Within inspection window
Scoped support: AFL marketed connector-series examples: stated ferrule nominal sizes and coupling mechanisms; no exact orderableSKU.
Not established / limitations: Ferrule dimensions refer to AFL overview context, not universal housing/mating tolerances. Image-only latch/body observations remain labelled manufacturer illustrations; no measurements,partmarkings or performance from pixels.
Locator: Full manufacturer page: LC,SC,ST,FCsections and each directlylinked connector image; all4actual JPEGs downloaded/viewed.
Trace 12 claims to their source records
C066A · P066
Corning lists LC fiber connections in both UPC and APC variants. Connector family and end-face polish are separate identification requirements.
Claim scope: Named standard or manufacturer description only; procedural checks are editorial recommendations, not hardware tests.
Source links: S049 · S050 · Evidence trail → (private workspace)
C066C · P066
Fluke Networks distinguishes APC and UPC endfaces and warns against directly mating the two polishes because the ferrules do not align properly and damage can result. A hybrid cord whose two ends each match their respective ports is a different question.
Claim scope: V121 named-product or explicitly scoped manufacturer distinction only; no wiring instruction, independent engineering approval or end-to-end compatibility guarantee.
Source links: S504 · Evidence trail → (private workspace)
C066D · P066
Corning’s 2018 UniCam ordering table distinguishes the single-mode LC UPC part 95-200-99 from LC APC part 95-200-94.
Claim scope: Those two dated order-code rows only; an LC shell or its color does not select a polish or establish a link.
Source links: S529 · Evidence trail → (private workspace)
C066E · P066
Corning lists a trigger, crimp band and three boot options in the package contents for UniCam LC kit 95-200-99.
Claim scope: Package components for that product record, not a guarantee that every loose or assembled LC connector has those parts. Boot sizes are not imported as connector dimensions.
Source links: S534 · Evidence trail → (private workspace)
C066F · P066
Corning’s OEM guide identifies 740-0085-006-B as a duplex LC/LC adapter with an SC cutout.
Claim scope: Printed page 15. SC describes the listed panel cutout; the listed optical connector interfaces are LC/LC. No panel dimensions or mating approval inferred.
Source links: S530 · Evidence trail → (private workspace)
C066G · P066
AFL lists a nominal 1.25 mm ferrule for its LC connector overview. AFL describes simplex/duplex LC variants.
Claim scope: AFL LC marketedconnector overview;not universalfamily mechanicaltolerance;ferrulesize is not outerhousingdimension,contactpitch or sourceimage measurement.
Source links: S954 · Evidence trail → (private workspace)
C066H · P066
Corning OEM-064-AEN lists 721-533N-3380B as: Simplex LC, with clip, APC, no-logo option; green housing/boot, white dust cap.
Claim scope: Exact named Corningpart/subassembly inMay2020catalog;no universalfinish,matingdimension or assemblyapproval.
Source links: S951 · Evidence trail → (private workspace)
C337A · P337
Corning lists LC PC duplex connector code 0505 and the ZR4 OM4 cable option in the LC Duplex Jumper in a Box ordering section. PC is the source label; this reference does not relabel it UPC.
Claim scope: LAN-3921-AEN revision 2025-03-03, page 6; selected LC duplex / ZR4 option, not all Corning assemblies.
Source links: S432 · Evidence trail → (private workspace)
C337B · P337
The selected Corning Jumper in a Box reference belongs to the two-fiber patch-cord family. Its ordering section requires separate choices for cable/fiber, length and packaging; it does not identify one measured or purchased cord.
Claim scope: Pages 1 and 6; no selected SKU, fixed length, duplex mapping or actual product availability is asserted.
Source links: S432 · Evidence trail → (private workspace)
C338A · P338
Corning lists single-mode LC UPC uniboot code 78 for each end and the G single-mode OS2 fiber option in its reverse-polarity duplex patch-cord family. The uniboot carries two fibers in one cable.
Claim scope: LAN-3921-AEN revision 2025-03-03, page 2; selected 78/78/G family option.
Source links: S432 · Evidence trail → (private workspace)
C338B · P338
Corning describes this reverse-polarity uniboot series as supplied in A–B polarity and changeable to A–A without tools. That factory state and changeability are series-specific, not a statement about an unidentified LC cord.
Claim scope: Page 2; Corning calls A–B flipped and A–A straight through. No current state of a used cord or universal LC polarity is inferred.
Source links: S432 · Evidence trail → (private workspace)
C338C · P338
Fluke explains that a two-fiber duplex channel must connect each transmitter to the corresponding remote receiver across all intervening segments. It warns against looking directly into a port to identify a transmitting fiber.
Claim scope: End-to-End Duplex Polarity and How to Check Duplex Polarity; no optical power, detector or complete channel qualification is established.
Source links: S435 · Evidence trail → (private workspace)
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
