Guide note · not an individual product specification
The useful distinction
Understand the requirement.
Keep microphone demand, receiver supply documentation and your observed switch state separate. [C150A]
Scarlett 2i2 4th Gen phantom power is shared across both XLR microphone inputs and is not sent to the front jack inputs. [C150B]
Bounded facts, visible unknowns
Specifications and limits
Phantom power: requirement, supply and switch state facts and limitations
Workflow boundary
Scoped analog audio documentation; not wiring or compatibility approval. [C150A][C150B]
Verified device list
Not included. Check exact device and accessory documentation.
A boundary, not an omission to guess around.
A documented supply voltage can be compared with a documented microphone range. This is only a range check. Cable wiring, current capacity, regulation and all connected devices remain separate checks. An absent requirement in an inspected section is unknown, not zero.
Before you connect
What to check
Identify the exact device and port.
Keep shared channels and controls explicit.
Retain unknown power, mode and cable observations.
Rows assigned to the same physical interface unit must not give contradictory observations for one shared phantom control. Every connected XLR path matters. Never assume that a dynamic label alone certifies tolerance of phantom power.
Consult instructions before changing the setup
Use the exact manufacturer setup procedure and stop when equipment, cables or power requirements are uncertain. The application neither recommends hot-patching nor authorizes power for a connected device.
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
C150ASource checked · pending review
AT2035 documentation specifies an 11–52 V DC phantom range.
Locator: Page 1: output description and phantom specification Access: public pdf text. Historical manufacturer sheet, not a new publication. A voltage-range comparison does not establish sufficient current, regulation or cable continuity.
Locator: Front/rear panels, line/instrument and phantom power sections Access: public page. This is not permission to enable phantom power on unknown connected equipment.
Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Assessment 2026-10-22 · earliest scheduled source review 2027-01-01. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Not established / limitations: Historical manufacturer sheet, not a new publication. A voltage-range comparison does not establish sufficient current, regulation or cable continuity.
Locator: Page 1: output description and phantom specification
Trace 2 claims to their source records
C150A · P150
AT2035 documentation specifies an 11–52 V DC phantom range.
Claim scope: Exact-model analog audio reference; no end-to-end compatibility or electrical approval.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
