P310 / Audio / Connector

4-pin Mini-XLR (Switchcraft Tini-QG) connector

Switchcraft identifies this Tini-QG product as a Mini-XLR connector with 4 conductors.

Also called Mini-XLR 4 4-pin Mini XLR Tini-QG 4-pin

Mini-XLR family name and conductor count identify a connector form; they do not establish the connected device signal, power scheme or contact assignment.

Look for

Confirm the compact Mini-XLR/Tini-QG form and 4-conductor variant; do not substitute it for full-size XLR or infer a wiring scheme from pole count.

Claim inspection dates: 2026-10-06, 2026-10-11 · Independent review pending

4-pin Mini-XLR (Switchcraft Tini-QG) connector: three-quarter view. Computer-generated illustration, not a photograph.

4-pin Mini-XLR (Switchcraft Tini-QG) connector: mating face. Computer-generated illustration, not a photograph.

Image inspection / P310

See the view. Check its scope.

1 registered view for this reference. Different part examples are not automatically mates; all remain not to scale and independently unapproved.

P310 / Source-observed physical study

TA4FS series / mating-face view

Switchcraft TA4FS series; cable-size suffix not selected

Front mating-side view, TA4FS entry, TA_FS revision B · Cable plug / cable end

Not to scale. Technical and rights review pending.

Inspect view & provenance

The useful distinction

Recognize it. Then verify it.

Switchcraft identifies this Tini-QG product as a Mini-XLR connector with 4 conductors. [C310A]

Switchcraft drawing TA_FS series revision B identifies F as female, S as sealed, and cable-size suffix 11 as the 2.54–3.05 mm range in its ordering code. The four-contact front view is labelled TA4FS series. [C310C]

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts	4S351Source-backed nominal position/contact count for identification: 4. Not a pinout or manufacturing drawing.
Connector role	plug (TA4MS11)S351Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. TA4MS11. Documented role: plug. Cable opening0.19/0.12/0.13in is wire acceptance,not connector geometry. Three/four/five pin counts do not assign any circuit function.
Coupling / latch	Button latch (TA4MS11)S351Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. TA4MS11. Documented role: plug. Cable opening0.19/0.12/0.13in is wire acceptance,not connector geometry. Three/four/five pin counts do not assign any circuit function.
Manufacturer	Switchcraft (TA4MS11)S351Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. TA4MS11. Documented role: plug. Cable opening0.19/0.12/0.13in is wire acceptance,not connector geometry. Three/four/five pin counts do not assign any circuit function.
Series	Tini-QG (TA4MS11)S351Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. TA4MS11. Documented role: plug. Cable opening0.19/0.12/0.13in is wire acceptance,not connector geometry. Three/four/five pin counts do not assign any circuit function.
Exact part / implementation	TA4MS11 (TA4MS11)S351Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. TA4MS11. Documented role: plug. Cable opening0.19/0.12/0.13in is wire acceptance,not connector geometry. Three/four/five pin counts do not assign any circuit function.
View convention	Contact labels follow the cited female connector front mating-side view. Opposite gender, rear/termination view and device documentation must be rechecked rather than mirrored by assumption.S351 · S359Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Existing engineering orientation text; source/part/view remains controlling.

Not recorded: Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Mounting, Keying / polarization, Shell / form, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

Numbered Mini-XLR contacts do not establish microphone, audio, intercom, power, bias or device-specific signal functions.
V51 does not normalize rear-side solder-cup orientation, cable conductor colors, mechanical tolerances or fabrication dimensions.

Report a correction to these facts →

Bounded facts, visible unknowns

Specifications and limits

4-pin Mini-XLR (Switchcraft Tini-QG) connector facts and limitations
Documented identification	Switchcraft’s cited Tini-QG product is identified as a Standard Connector Type Mini-XLR with 4 conductors. [C310A]
Mechanical dimensions	No independently reviewed mechanical drawing in V50; do not use this page for fabrication, fit testing or tolerance work.
Engineering pinout	Source-checked engineering profile available; independent review pending. Open engineering profile →
Verified device list	Not included. Check exact device and accessory documentation.

A boundary, not an omission to guess around.

Use only the source-backed family, role or position count for identification. Resolve electrical ratings, protocol generation, lane wiring, signal assignment, cable construction and exact device support from the relevant equipment and component documentation.

Before you connect

What to check

Identify the exact connector family and variant from the equipment or component documentation.
Keep physical form, contact count, protocol, electrical rating and device support as separate facts.
Do not force, rewire, adapt or install from this recognition record; resolve the remaining requirements first.

Trace a supported connection class →

What is not established

This field note does not approve a connection, adapter, cable assembly, rewiring scheme, energized-work procedure or fabricated part. It intentionally omits unsupported pin assignments and mechanical tolerances.

Your next step

Move from the form to the requirement.

Read the engineering reference Source-scoped details, orientation and explicit unknowns.Work through a connection Choose your task before deciding on a cable.Explore this evidence trail Inspect the claims and their dependencies.

The source trail

Evidence for this page

AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.

Back to first citation ↑

C310ASource checked · pending review

Switchcraft’s cited Tini-QG product is identified as a Standard Connector Type Mini-XLR with 4 conductors.

Switchcraft · Switchcraft Tini-QG Mini-XLR 4-conductor product ↗

Locator: Configuration: number of conductors, product line and standard connector type
Access: public page. Source-backed identification does not establish universal wiring, protocol generation, device compatibility, safe installation or fabrication approval.

S351: full source recordInspect review dependencies →

Claim scope: V50 identification fact only; no wiring, protocol compatibility, installation or fabrication approval is inferred.. Next review due 2027-01-04.

Back to first citation ↑

C310CSource checked · pending review

Switchcraft · Switchcraft sealed Tini-QG Mini-XLR customer drawing ↗

Locator: Front mating-side views for TA3FS, TA4FS and TA5FS with numbered contacts
Access: public pdf text. Numbered contact positions do not establish universal audio, power, microphone, intercom or device-specific signal wiring.

S359: full source recordInspect review dependencies →

Claim scope: TA_FS customer drawing, one page, revision B dated 18-Dec-2015; no IP rating, exact suffix exterior difference or microphone pin assignment is inferred.. Next review due 2027-01-09.

Suggest a correction to this field note →

Discovery Quality III

Questions this record helps answer

All focused explainers →

Mini-XLR pin numbering vs device wiringDoes knowing the Mini-XLR pin number tell me what that pin carries on my microphone, beltpack, headset or other device?

Put this field note to work.

Add to discovery trayRecord an unsaved candidate

Compare look-alikes: 3-pin versus 4-pin Mini-XLR · 4-pin versus 5-pin Mini-XLR

Candidate selection does not confirm the identity or capabilities of your physical item.

SOURCE-QUALIFIED AUDIO REFERENCE

Separate contact count from equipment role.

Switchcraft TA4FS series

Role: Female cable connector; front mating-side view
Contacts: Four apertures. No signal labels or solder-side mirror view are supplied.
Meaning: F means female and S sealed in the ordering key; suffix 11 specifies the stated cable-size range, not a pin assignment.
Not established: A cable-size suffix has not been selected for the illustration; microphone wiring, bodypack support and IP rating are unknown.
Next check: Match the complete ordered part and both equipment manuals. Do not transfer a pinout from another four-contact connector.

Inspect the declared view →

Evidence, observation & limits

Inspected 2026-10-11. C310C

Switchcraft sealed Tini-QG Mini-XLR customer drawing ↗
Front mating-side views for TA3FS, TA4FS and TA5FS with numbered contacts
Canonical source record S359 dated 2026-10-06. The V129 visit is recorded separately; inherited source dates are unchanged.

No hardware test, independent technical approval or rights clearance is asserted.

Read the illustrated audio chart and field guide →

Evidence behind this page

Scope first. Source second. Approval separate.

2 linked sources · 2 scoped claims · 0 sources with inspection/access flags.

Page scope: catalogue_expansion_v50

Assessment 2026-10-22 · earliest scheduled source review 2027-01-04. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 2 source scopes, access limits and dates

S351 · Switchcraft Tini-QG Mini-XLR 4-conductor product

Switchcraft · Manufacturer / product-owner domain · inspected 2026-10-06 · due 2027-01-04

Within inspection window

Scoped support: Product-specific identification of a 4-conductor Switchcraft Tini-QG Mini-XLR form only.

Not established / limitations: Source-backed identification does not establish universal wiring, protocol generation, device compatibility, safe installation or fabrication approval.

Locator: Configuration: number of conductors, product line and standard connector type

S359 · Switchcraft sealed Tini-QG Mini-XLR customer drawing

Switchcraft · Manufacturer / product-owner domain · inspected 2026-10-06 · due 2027-01-04

Within inspection window

Scoped support: Manufacturer-example front mating-side numbering and latch context for 3-, 4- and 5-position sealed female Tini-QG connectors.

Not established / limitations: Numbered contact positions do not establish universal audio, power, microphone, intercom or device-specific signal wiring.

Locator: Front mating-side views for TA3FS, TA4FS and TA5FS with numbered contacts

Trace 2 claims to their source records

C310A · P310

Switchcraft’s cited Tini-QG product is identified as a Standard Connector Type Mini-XLR with 4 conductors.

Claim scope: V50 identification fact only; no wiring, protocol compatibility, installation or fabrication approval is inferred.

Source links: S351 · Evidence trail → (private workspace)

C310C · P310

Claim scope: TA_FS customer drawing, one page, revision B dated 18-Dec-2015; no IP rating, exact suffix exterior difference or microphone pin assignment is inferred.

Source links: S359 · Evidence trail → (private workspace)

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.