Cable / adapter note · not an individual product specification
The useful distinction
Understand the requirement.
Bridge a specified X-coded industrial Ethernet connection to its designated RJ45 port using a finished 2m assembly. [C986A]
Bounded facts, visible unknowns
Specifications and limits
Phoenix 1407480 — X-coded CAT6A industrial link facts and limitations
Documented task / mode
CAT6A Ethernet/CC-Link IE up to 10Gb/s is stated for this exact assembly. [C986A]
Construction / length
Four twisted pairs, AWG26/7 S/FTP copper, PUR outer jacket; retain the exact 94F option. 2m exact article. Fixed and moving bend requirements differ; do not infer a continuous-flex service life. [C986A]
Verified device list
Not included. Check exact device and accessory documentation.
A boundary, not an omission to guess around.
Four twisted pairs, AWG26/7 S/FTP copper, PUR outer jacket; retain the exact 94F option. The catalog PDF has distinct M12, RJ45 and cable environmental fields. Protection depends on documented mating; a bare unplugged connector is not declared sealed.
Before you connect
What to check
Match port coding and product number, record the cable's fixed/moving route and consult the endpoint's required mating/enclosure conditions.
Check condition with power disconnected where the equipment guidance permits; stop for damage, heat or unknown powered connections.
Keep published source support separate from physical test results.
Two-way Ethernet data between documented M12 X-coded and RJ45 interfaces; no one-way converter is present. Lower link rates depend on supported PHYs and configuration at each endpoint; changing coding does not add protocol conversion.
Worked selection example
Where both industrial port manuals specify this X-coded-to-RJ45 CAT6A path, use the 2m article and check cable routing against the fixed or moving condition.
What to observe next
Match port coding and product number, record the cable's fixed/moving route and consult the endpoint's required mating/enclosure conditions.
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
C986ASource checked · pending review
CAT6A Ethernet/CC-Link IE up to 10Gb/s is stated for this exact assembly. The sheet's nominal 48VAC/60VDC, 0.5A interface ratings do not establish an arbitrary power-feed or PoE negotiation. Four twisted pairs, AWG26/7 S/FTP copper, PUR outer jacket; retain the exact 94F option. 2m exact article. Fixed and moving bend requirements differ; do not infer a continuous-flex service life.
Computer-generated illustration with prior AI visual review. Not a photograph, measurement or compatibility check. Independent technical and rights review pending.
Assessment 2026-10-23 · earliest scheduled source review 2027-01-21. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Not established / limitations: Exact industrial 2m cord; Spanish technical text read. Assembly/connector/cable ratings remain distinct.
Locator: pp. 1–4: 2m X-coded CAT6A, electrical ratings, four-pair AWG26/7 S/FTP PUR; pp. 6–8 contact drawings not reproduced
Trace 1 claims to their source records
C986A · P806
CAT6A Ethernet/CC-Link IE up to 10Gb/s is stated for this exact assembly. The sheet's nominal 48VAC/60VDC, 0.5A interface ratings do not establish an arbitrary power-feed or PoE negotiation. Four twisted pairs, AWG26/7 S/FTP copper, PUR outer jacket; retain the exact 94F option. 2m exact article. Fixed and moving bend requirements differ; do not infer a continuous-flex service life.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
