Applies to: Documented component examples for identification and document selection. Exact equipment wiring, replacement suitability and powered use require the equipment maker’s documentation.
What the path requires
- wire-to-board cable housing and board header
- Documented pitch: 2.0 mm. Dual-row example: 8.8 mm mated height and 5 mm depth.
Exact part, mate and contact
JST PHDR-08VS; mate B8B-PHDSS; contact SPHD-002T-P0.5. Tool resource: AP-K2N / MKS-L-10 / APLMK SPHD002-05.
PHD connector catalogWhat to observe
Count cavities and populated contacts separately.
Obtain a disconnected housing front and latch/termination side.
Measure a span across several pitch intervals; record the axis and uncertainty.
PHD connector catalogWorked documentary examples
Documented component path
Documented outcome: With PHDR-08VS identified in the equipment documentation, use the named PHD catalog row to select B8B-PHDSS and the appropriate terminal. Check the source’s mounting/entry and wire criteria before proceeding.
Missing exact evidence
Documented outcome: If only pitch or wire count agrees, retain a family candidate and send the exact views, span/interval reading and markings to JST; no replacement is selected.
Your next useful observation
Compare the complete suffix, row arrangement, latch and entry direction against the manufacturer catalog.
Keep these limits
- Stop when the exact equipment part/wiring, opposing component or applicable terminal cannot be established.
- Documented component examples for identification and document selection. Exact equipment wiring, replacement suitability and powered use require the equipment maker’s documentation.
Source documents, revisions and inspection methods
PHD connector catalog
JST · Revision not stated in inspected source
p.1 dual-row pitch/mated dimensions; p.2 PHDR-08VS/contact/tool; p.3 B8B-PHDSS header
Inspected 2026-10-23 by public_pdf_text. AI-assisted reading of stated sections using official web retrieval; no independent human review or hardware testing
Documented component examples for identification and document selection. Exact equipment wiring, replacement suitability and powered use require the equipment maker’s documentation.
Read the original sourcePH connector catalog
JST · Revision not stated in inspected source
pp.2–3 contact/tool table, housing/header four- and six-circuit rows; p.1 board-view note
Inspected 2026-10-23 by public_pdf_text. AI-assisted reading of stated sections using official web retrieval; no independent human review or hardware testing
Documented component examples for identification and document selection. Exact equipment wiring, replacement suitability and powered use require the equipment maker’s documentation.
Read the original sourcePA family / PA and PAL connector catalog
JST · Revision not stated in inspected source
p.1 series distinction; p.6 PAP-04V-S/contact/tool; p.9 standard header; p.13 PALR-04V/contact/tool; model/combination sections
Inspected 2026-10-23 by public_pdf_text. AI-assisted reading of stated sections using official web retrieval; no independent human review or hardware testing
Documented component examples for identification and document selection. Exact equipment wiring, replacement suitability and powered use require the equipment maker’s documentation.
Read the original sourceSource-documented education. Hardware behavior and independent human review have not been performed for these examples.