E004 · Source-scoped pinout variants

USB Type-C engineering reference

USB Type-C connector interface; connector identity alone does not establish USB generation, USB4/Thunderbolt, video transport or charging capability.

Open field note Source trail

Source checked · no independent review claimed · Fabrication approved: no

USB Type-C engineering reference original orientation schematic — Original pinout diagram; read the exact variant and view below. Not to scale.

Contact count

24

plug and receptacle interface

Mating boundary

Shape is not the verdict.

USB Type-C plug ↔ USB Type-C receptacle

Orientation

How to read this profile

Original schematic shows the receptacle mating face. Row A runs A1 to A12 left-to-right; row B is displayed B12 to B1 left-to-right so physical face orientation remains explicit.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts	24S003 · S188 · S189 · S190plug and receptacle interface; nominal engineering count, not automatically positions, population or a device wiring map. plug and receptacle interface
Positions / cavity span	24 (Full receptacle A1-A12/B1-B12)S188 · S189 · S190Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. USB Type-C interface contact naming only; not a protocol, charging, video, cable-quality or manufacturing-tolerance guarantee
Contact rows	2 (Two named receptacle contact banks A/B); 2 (Molex 1054500101)S188 · S189 · S190 · S972Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. A1-A12/B1-B12 banks in source-scoped engineering orientation, not an inferred PCB termination footprint. Exact Molex 1054500101, female right-angle USB-C receptacle; manufacturer mating-interface/row fields only, not a universal family value. Quantity context: Manufacturer Number of Rows property.
Contact pitch	0.5 mm Manufacturer Pitch - Mating Interface; internal gap order and physical projection not further dimensioned (Molex 1054500101)S972Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. Exact Molex 1054500101, female right-angle USB-C receptacle; manufacturer mating-interface/row fields only, not a universal family value.
Dimensions / axis	1.9 mm pin length G (632723300011)S862Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 632723300011: Type-C receptacle, horizontal THR/SMT. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No pin-assignment changes proposed; part-specific pin length is not mating depth or universal Type-C geometry.
Connector role	plug; socket; socket (632723300011)S003 · S188 · S189 · S190 · S862Separate exact examples; retain each value’s source, role, axis and part scope. plug and receptacle interface Exact named example 632723300011: Type-C receptacle, horizontal THR/SMT. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No pin-assignment changes proposed; part-specific pin length is not mating depth or universal Type-C geometry.
Mounting	horizontal THR/SMT (632723300011)S862Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 632723300011: Type-C receptacle, horizontal THR/SMT. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No pin-assignment changes proposed; part-specific pin length is not mating depth or universal Type-C geometry.
Manufacturer	Würth Elektronik (632723300011)S862Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 632723300011: Type-C receptacle, horizontal THR/SMT. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No pin-assignment changes proposed; part-specific pin length is not mating depth or universal Type-C geometry.
Series	WR-COM USB 3.1 (632723300011)S862Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 632723300011: Type-C receptacle, horizontal THR/SMT. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No pin-assignment changes proposed; part-specific pin length is not mating depth or universal Type-C geometry.
Exact part / implementation	632723300011 (632723300011)S862Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 632723300011: Type-C receptacle, horizontal THR/SMT. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No pin-assignment changes proposed; part-specific pin length is not mating depth or universal Type-C geometry.
View convention	Original schematic shows the receptacle mating face. Row A runs A1 to A12 left-to-right; row B is displayed B12 to B1 left-to-right so physical face orientation remains explicit.S003 · S188 · S189 · S190Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Existing engineering orientation text; source/part/view remains controlling.

Not recorded: Populated contacts, Contact gender / arrangement, Coupling / latch, Keying / polarization, Shell / form, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

Generic shell, tongue, contact-placement and mating tolerances are not published in V35.
A Type-C contact map is not evidence of the data, video or power modes supported by a particular device or cable.
USB Full-Featured Type-C receptacle, USB signal allocation: Receptacle front/mating face, USB-C Release 2.0 Figure 2-1 p. 30: top row A1→A12 left to right; bottom row B12→B1 left to right.
USB 2.0-only Type-C receptacle allocation: Receptacle front/mating face, USB-C Release 2.0 Figure 2-1 p. 30: top row A1→A12 left to right; bottom row B12→B1 left to right.
Negotiated Alternate/Accessory Mode receptacle reassignments — unverified: Receptacle front/mating face, USB-C Release 2.0 Figure 2-1 p. 30: top row A1→A12 left to right; bottom row B12→B1 left to right.

Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

Dark pinout view

What the status labels mean

Confirmed: Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source: Only one underlying document, or one pass, supports this assignment.
Device-specific: Supported for the named equipment or wiring only. Check your device’s manual.
Unverified: Missing or conflicting evidence. Do not wire from this row.
Not connected: The source explicitly says NC, no contact or no pin for this wiring.

Wiring variantUSB Full-Featured Type-C receptacle, USB signal allocation

USB Full-Featured Type-C receptacle, USB signal allocation

View and evidence limits

Receptacle front/mating face, USB-C Release 2.0 Figure 2-1 p. 30: top row A1→A12 left to right; bottom row B12→B1 left to right.

P004 USB Type-C — Agree on all 24 receptacle contacts — USB-IF Type-C specification reached.
DisplayPort, HDMI, Thunderbolt, debug accessory and other negotiated Alternate Mode mappings are not independently tabulated here. Release 2.0 Appendix E §§E.1–E.2 states the architecture; a mode specification is needed for each exact mapping.
Appendix A Table A-1 p. 310 assigns the adapter PLUG pins, not a fixed receptacle mapping. Receptacle audio functions depend on adapter orientation. It is not copied into the receptacle table.
This is a Release 2.0 evidence snapshot, not a claim that every later USB-C connector option is covered.

Receptacle face · looking into the port. Original drawing · not to scale. Scroll sideways if needed.

USB Full-Featured Type-C receptacle, USB signal allocation — source-scoped contact map
Pin	Signal	What it does	Status
A1	GND	Ground reference and return.	Confirmed Sources
A2	TXp1	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
A3	TXn1	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
A4	VBUS	USB bus power; voltage and current depend on the device.	Confirmed Sources
A5	CC1	USB-C configuration channel: detects attachment and negotiates roles.	Confirmed Sources
A6	Dp1	USB 2.0 data, positive side of the pair.	Confirmed Sources
A7	Dn1	USB 2.0 data, negative side of the pair.	Confirmed Sources
A8	SBU1	Sideband conductor used by supported USB-C alternate modes.	Confirmed Sources
A9	VBUS	USB bus power; voltage and current depend on the device.	Confirmed Sources
A10	RXn2	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
A11	RXp2	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
A12	GND	Ground reference and return.	Confirmed Sources
B1	GND	Ground reference and return.	Confirmed Sources
B2	TXp2	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
B3	TXn2	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
B4	VBUS	USB bus power; voltage and current depend on the device.	Confirmed Sources
B5	CC2	USB-C configuration channel: detects attachment and negotiates roles.	Confirmed Sources
B6	Dp2	USB 2.0 data, positive side of the pair.	Confirmed Sources
B7	Dn2	USB 2.0 data, negative side of the pair.	Confirmed Sources
B8	SBU2	Sideband conductor used by supported USB-C alternate modes.	Confirmed Sources
B9	VBUS	USB bus power; voltage and current depend on the device.	Confirmed Sources
B10	RXn1	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
B11	RXp1	Signal conductor. Pair, polarity and direction follow this named wiring.	Confirmed Sources
B12	GND	Ground reference and return.	Confirmed Sources

Sources (3)

S651 · USB 3.0 Promoter Group / USB-IF · USB Type-C Cable and Connector Specification
Release 2.0, August 2019 · p. 68, §3.2.3, Table 3-4 and notes; p. 30, §2.1, Figure 2-1 (Receptacle Interface, Front View); pp. 32–34, §2.3 Configuration Process
S659 · USB 3.0 Promoter Group / USB-IF · Universal Serial Bus Type-C Cable and Connector Specification
Release 2.5, March 2026 (current release in the USB-IF document library on the access date) · Table 3-4 'USB Type-C Receptacle Interface Pin Assignments', printed p. 76
S660 · USB 3.0 Promoter Group / USB-IF · Universal Serial Bus Type-C Cable and Connector Specification
Release 2.0, August 2019 (superseded; used as a second reading) · Table 3-4, printed p. 68

USB 2.0-only Type-C receptacle allocation

View and evidence limits

Receptacle front/mating face, USB-C Release 2.0 Figure 2-1 p. 30: top row A1→A12 left to right; bottom row B12→B1 left to right.

P004 USB Type-C — Agree on all 24 receptacle contacts — USB-IF Type-C specification reached.
Unused high-speed contact locations may be unpopulated in the USB 2.0 receptacle; this table records all 24 physical locations, not 24 mandatory metal contacts.
DisplayPort, HDMI, Thunderbolt, debug accessory and other negotiated Alternate Mode mappings are not independently tabulated here. Release 2.0 Appendix E §§E.1–E.2 states the architecture; a mode specification is needed for each exact mapping.
Appendix A Table A-1 p. 310 assigns the adapter PLUG pins, not a fixed receptacle mapping. Receptacle audio functions depend on adapter orientation. It is not copied into the receptacle table.
This is a Release 2.0 evidence snapshot, not a claim that every later USB-C connector option is covered.

Receptacle face · looking into the port. Original drawing · not to scale. Scroll sideways if needed.

USB 2.0-only Type-C receptacle allocation — source-scoped contact map
Pin	Signal	What it does	Status
A1	GND	Ground reference and return.	Single source Sources
A2	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
A3	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
A4	VBUS	USB bus power; voltage and current depend on the device.	Single source Sources
A5	CC1	USB-C configuration channel: detects attachment and negotiates roles.	Single source Sources
A6	Dp1	USB 2.0 data, positive side of the pair.	Single source Sources
A7	Dn1	USB 2.0 data, negative side of the pair.	Single source Sources
A8	SBU1	Sideband conductor used by supported USB-C alternate modes.	Single source Sources
A9	VBUS	USB bus power; voltage and current depend on the device.	Single source Sources
A10	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
A11	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
A12	GND	Ground reference and return.	Single source Sources
B1	GND	Ground reference and return.	Single source Sources
B2	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
B3	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
B4	VBUS	USB bus power; voltage and current depend on the device.	Single source Sources
B5	CC2	USB-C configuration channel: detects attachment and negotiates roles.	Single source Sources
B6	Dp2	USB 2.0 data, positive side of the pair.	Single source Sources
B7	Dn2	USB 2.0 data, negative side of the pair.	Single source Sources
B8	SBU2	Sideband conductor used by supported USB-C alternate modes.	Single source Sources
B9	VBUS	USB bus power; voltage and current depend on the device.	Single source Sources
B10	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
B11	Unused contact location	Control, detection or configuration connection; check the source and device.	Single source Sources
B12	GND	Ground reference and return.	Single source Sources

Sources (1)

S651 · USB 3.0 Promoter Group / USB-IF · USB Type-C Cable and Connector Specification
Release 2.0, August 2019 · p. 69, Table 3-5 and notes 1–5; p. 30, §2.1, Figure 2-1 (Receptacle Interface, Front View); p. 56, §3.2.2.1, USB 2.0 receptacle contact-population paragraph

Negotiated Alternate/Accessory Mode receptacle reassignments — unver…

Negotiated Alternate/Accessory Mode receptacle reassignments — unverified

View and evidence limits

Receptacle front/mating face, USB-C Release 2.0 Figure 2-1 p. 30: top row A1→A12 left to right; bottom row B12→B1 left to right.

P004 USB Type-C — Agree on all 24 receptacle contacts — USB-IF Type-C specification reached.
No unsupported mode-specific pin rows are invented. See unverified[]; Table A-1 is a plug assignment and must not be substituted for the receptacle map.
DisplayPort, HDMI, Thunderbolt, debug accessory and other negotiated Alternate Mode mappings are not independently tabulated here. Release 2.0 Appendix E §§E.1–E.2 states the architecture; a mode specification is needed for each exact mapping.
Appendix A Table A-1 p. 310 assigns the adapter PLUG pins, not a fixed receptacle mapping. Receptacle audio functions depend on adapter orientation. It is not copied into the receptacle table.
This is a Release 2.0 evidence snapshot, not a claim that every later USB-C connector option is covered.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Not yet independently confirmed. No settled pin table is available for this wiring.

Sources (1)

S651 · USB 3.0 Promoter Group / USB-IF · USB Type-C Cable and Connector Specification
Release 2.0, August 2019 · p. 30, §2.1, Figure 2-1 (Receptacle Interface, Front View); p. 310, Table A-1, Location on 3.5 mm Jack and CTIA/OMTP notes; p. 56, §3.2.2.1, USB 2.0 receptacle contact-population paragraph; p. 68, §3.2.3, Table 3-4 and notes; p. 69, Table 3-5 and notes 1–5; p. 77, Table 3-12, USB 3.1 Standard-A plug column; p. 78, Table 3-13, USB 2.0 Standard-A plug column; pp. 309–310 Appendix A; pp. 350–352 Appendix E; pp. 32–34, §2.3 Configuration Process

Unknowns stay unknown.

Generic shell, tongue, contact-placement and mating tolerances are not published in V35.
A Type-C contact map is not evidence of the data, video or power modes supported by a particular device or cable.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C004Asource checked

USB Type-C names the reversible connector, not a guaranteed data rate, charging wattage or video capability.

USB-IF · USB Type-C language guidelines, March 2023 ↗
USB Type-C is not USB performance; USB 2.0 Type-C cables section · Not a mechanical specification or permission to use USB logos.

C004Csource checked

A full USB Type-C receptacle has 24 labeled positions, A1–A12 and B1–B12; source-checked groups include ground, VBUS, CC1/CC2, USB 2 D+/D−, SBU1/SBU2 and SuperSpeed transmit/receive pairs.

USB-IF · USB Type-C® Cable and Connector Specification Release 2.5 ↗
Release 2.5 landing page; specification identity and publication date · Specification use remains subject to USB-IF terms. V35 does not publish mechanical tolerances from the specification.

Microchip Technology · USB Type-C Cables and Connectors ↗
Type-C Signals; Type-C Connector · The inspected page contains a likely repeated A8 label around SBU naming; V35 does not rely on that repetition and cross-checks pin labels against S190.

Infineon Technologies · AURIX TC4xx HSTC USB Type-C connector pinning ↗
Connector pinning table; USB column only · This documentation describes a special AURIX tool connector and explicitly is not a regular USB cable application. V35 uses only the USB contact-label column as a cross-check.

C800Gsource checked

USB Full-Featured Type-C receptacle, USB signal allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

USB 3.0 Promoter Group / USB-IF · USB Type-C Cable and Connector Specification ↗
p. 30, §2.1, Figure 2-1 (Receptacle Interface, Front View); p. 310, Table A-1, Location on 3.5 mm Jack and CTIA/OMTP notes; p. 56, §3.2.2.1, USB 2.0 receptacle contact-population paragraph; p. 68, §3.2.3, Table 3-4 and notes; p. 69, Table 3-5 and notes 1–5; p. 77, Table 3-12, USB 3.1 Standard-A plug column; p. 78, Table 3-13, USB 2.0 Standard-A plug column; pp. 309–310 Appendix A; pp. 350–352 Appendix E; pp. 32–34, §2.3 Configuration Process · Source scope and unresolved evidence are preserved in the engineering variant.

USB 3.0 Promoter Group / USB-IF · Universal Serial Bus Type-C Cable and Connector Specification ↗
Table 3-4 'USB Type-C Receptacle Interface Pin Assignments', printed p. 76 · Source scope and unresolved evidence are preserved in the engineering variant.

USB 3.0 Promoter Group / USB-IF · Universal Serial Bus Type-C Cable and Connector Specification ↗
Table 3-4, printed p. 68 · Source scope and unresolved evidence are preserved in the engineering variant.

C800Hsource checked

USB 2.0-only Type-C receptacle allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

C800Isource checked

Negotiated Alternate/Accessory Mode receptacle reassignments — unverified: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

C004Wsource checked

Molex specifies 1054500101 as a USB-C receptacle, 24 loaded circuits and 2 row(s), with mating-interface pitch 0.50mm.

Molex · Molex 105450 series chart, exact 1054500101 USB-C receptacle ↗
Full Export Spreadsheet table, exact 1054500101 row: Web Description, Gender, Circuits Loaded, Number of Rows, Pitch - Mating Interface and separate Pitch - Termination Interface columns. Full official chart read; no PDF drawing pixels acquired. · Existing two-bank row field already known. Exact-component row context adds zero distinct row gain. Product detail page says Limited Information Available; chart fields retained without measured/toleranced drawing.

8 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

8 linked sources · 6 scoped claims · 0 sources with inspection/access flags.

Page scope: Original contact-label schematic; mating-face orientation explicit; not to scale and not a manufacturing drawing.

Assessment 2026-10-22 · earliest scheduled source review 2026-12-30. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 8 source scopes, access limits and dates

S003 · USB Type-C language guidelines, March 2023

USB-IF · Standards-organization domain · inspected 2026-10-01 · due 2026-12-30

Within inspection window

Scoped support: Shape/performance distinction and absence of high-speed lanes in USB 2.0 Type-C cables.

Not established / limitations: Not a mechanical specification or permission to use USB logos.

Locator: USB Type-C is not USB performance; USB 2.0 Type-C cables section

S188 · USB Type-C® Cable and Connector Specification Release 2.5

USB-IF · Standards-organization domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Current USB Type-C specification context. Detailed contact naming in V35 is corroborated with implementation documentation rather than redistributing USB-IF specification tables or drawings.

Not established / limitations: Specification use remains subject to USB-IF terms. V35 does not publish mechanical tolerances from the specification.

Locator: Release 2.5 landing page; specification identity and publication date

S189 · USB Type-C Cables and Connectors

Microchip Technology · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: 24-position Type-C connector context and named signal groups. Used as a corroborating implementation reference, not as a manufacturing specification.

Not established / limitations: The inspected page contains a likely repeated A8 label around SBU naming; V35 does not rely on that repetition and cross-checks pin labels against S190.

Locator: Type-C Signals; Type-C Connector

S190 · AURIX TC4xx HSTC USB Type-C connector pinning

Infineon Technologies · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Cross-check of USB Type-C receptacle contact labels A1–A12 and B1–B12. AURIX-specific functional remapping is excluded.

Not established / limitations: This documentation describes a special AURIX tool connector and explicitly is not a regular USB cable application. V35 uses only the USB contact-label column as a cross-check.

Locator: Connector pinning table; USB column only

S651 · USB Type-C Cable and Connector Specification

USB 3.0 Promoter Group / USB-IF · Standards-organization domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 30, §2.1, Figure 2-1 (Receptacle Interface, Front View); p. 310, Table A-1, Location on 3.5 mm Jack and CTIA/OMTP notes; p. 56, §3.2.2.1, USB 2.0 receptacle contact-population paragraph; p. 68, §3.2.3, Table 3-4 and notes; p. 69, Table 3-5 and notes 1–5; p. 77, Table 3-12, USB 3.1 Standard-A plug column; p. 78, Table 3-13, USB 2.0 Standard-A plug column; pp. 309–310 Appendix A; pp. 350–352 Appendix E; pp. 32–34, §2.3 Configuration Process

S659 · Universal Serial Bus Type-C Cable and Connector Specification

USB 3.0 Promoter Group / USB-IF · Standards-organization domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: Table 3-4 'USB Type-C Receptacle Interface Pin Assignments', printed p. 76

S660 · Universal Serial Bus Type-C Cable and Connector Specification

USB 3.0 Promoter Group / USB-IF · Standards-organization domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: Table 3-4, printed p. 68

S972 · Molex 105450 series chart, exact 1054500101 USB-C receptacle

Molex · Manufacturer / product-owner domain · inspected 2026-10-22 · due 2027-01-20

Within inspection window

Scoped support: Exact 1054500101 specification row only.

Not established / limitations: Existing two-bank row field already known. Exact-component row context adds zero distinct row gain. Product detail page says Limited Information Available; chart fields retained without measured/toleranced drawing.

Locator: Full Export Spreadsheet table, exact 1054500101 row: Web Description, Gender, Circuits Loaded, Number of Rows, Pitch - Mating Interface and separate Pitch - Termination Interface columns. Full official chart read; no PDF drawing pixels acquired.

Trace 6 claims to their source records

C004A · P004

USB Type-C names the reversible connector, not a guaranteed data rate, charging wattage or video capability.

Claim scope: Consumer identification / documented standard or product class only

Source links: S003 · Evidence trail → (private workspace)

C004C · P004

A full USB Type-C receptacle has 24 labeled positions, A1–A12 and B1–B12; source-checked groups include ground, VBUS, CC1/CC2, USB 2 D+/D−, SBU1/SBU2 and SuperSpeed transmit/receive pairs.

Claim scope: USB Type-C interface contact naming only; not a protocol, charging, video, cable-quality or manufacturing-tolerance guarantee

Source links: S188 · S189 · S190 · Evidence trail → (private workspace)

C004W · P004

Molex specifies 1054500101 as a USB-C receptacle, 24 loaded circuits and 2 row(s), with mating-interface pitch 0.50mm.

Claim scope: Exact Molex 1054500101, female right-angle USB-C receptacle; manufacturer mating-interface/row fields only, not a universal family value.

Source links: S972 · Evidence trail → (private workspace)

C800G · P004

USB Full-Featured Type-C receptacle, USB signal allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S651 · S659 · S660 · Evidence trail → (private workspace)

C800H · P004

USB 2.0-only Type-C receptacle allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S651 · Evidence trail → (private workspace)

C800I · P004

Negotiated Alternate/Accessory Mode receptacle reassignments — unverified: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S651 · Evidence trail → (private workspace)

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.