E394 · No electrical assignment published

TE 0.5 mm bottom-contact FPC ZIF connector — 1-2492104-0 engineering reference

1-2492104-0: positions: 10; mounting: surface-mount; coupling: ZIF with stuffer actuator; dimensions: 10.6 mm (Manufacturer connector length); dimensions: 2 mm (Manufacturer connector height); dimensions: 5.2 mm (Manufacturer connector width); dimensions: 0.3 mm (Accepted flex-cable thickness (not connector body)). Only 1-2492104-0; no family-wide generalization.

Open field note Source trail

Source checked · no independent review claimed · Fabrication approved: no

TE 0.5 mm bottom-contact FPC ZIF connector — 1-2492104-0 — original, not-to-scale identification schematic; drawing review pending — **View** Simplified top/exterior viewRole Board-mounted FPC connector1-2492104-0 / 10 positions · not to scale · review pending
Identification schematic only · not to scale · drawing review pending. No engineering drawing is published for this profile.

Contact count

Not asserted

1-2492104-0 right-angle FPC socket receptacle, bottom mating contact location

Mating boundary

Shape is not the verdict.

Use the exact manufacturer mating component, terminal/cable and current drawing. Only 1-2492104-0; no family-wide generalization. A source-described lock, key or dimensional resemblance is not an approved equipment connection.

Orientation

How to read this profile

Textual manufacturer construction/configuration facts and explicitly labelled dimensions only. No mating-face, termination-side, contact-number layout or PCB footprint is reconstructed.

Bounded dimensions

Only what the sources support

Source-scoped dimensions; not fabrication clearances
Field	Value	Scope	Evidence
1-2492104-0 / Manufacturer connector length	10.6 mm	example component	[C362E]
1-2492104-0 / Manufacturer connector height	2 mm	example component	[C362E]
1-2492104-0 / Manufacturer connector width	5.2 mm	example component	[C362E]

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Positions / cavity span	10 (Claim C362A); 10 (1-2492104-0)S472 · S472Source-scoped examples are separate; select the exact variant and measured axis. Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff. 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use.
Contact pitch	0.5 mm Source-described pitch / centerline (Claim C362A)S472Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Dimensions / axis	10.6 mm Manufacturer connector length (1-2492104-0); 2 mm Manufacturer connector height (1-2492104-0); 5.2 mm Manufacturer connector width (1-2492104-0)S472Qualified exact source facts only; counterpart, mounting-acceptance, cable, port, termination and assembly context remains separately labelled in variant_notes. 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use.
Connector role	Right-angle PCB-mount flex-cable receptacle (1-2492104-0)S472Source-scoped examples are separate; select the exact variant and measured axis. 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use.
Contact gender / arrangement	Socket contacts; mating location bottom (1-2492104-0)S472Source-scoped examples are separate; select the exact variant and measured axis. 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use.
Mounting	board (Claim C362D); surface-mount (1-2492104-0)S479 · S472 · S472Source-scoped examples are separate; select the exact variant and measured axis. Contact side and cable-entry direction are separate attributes. 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use.
Coupling / latch	ZIF with stuffer actuator (1-2492104-0)S472Source-scoped examples are separate; select the exact variant and measured axis. 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use.
Manufacturer	TE Connectivity (1-2492104-0)S472Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Series	FPC ZIF (1-2492104-0)S472Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.
Exact part / implementation	1-2492104-0 (1-2492104-0)S472Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Source-checked named manufacturer series or part number only; no unknown-cable compatibility or engineering signoff.

Not recorded: Nominal contacts, Populated contacts, Contact rows, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

Current product page says Circuit Identification Feature: Without. This negative statement is not counted as an observed physical marking.
Retained dimensions context (excluded from normalized contact/body field): 0.3 mm / Accepted flex-cable thickness (not connector body). 1-2492104-0. Named primary-source example only. Identification facts do not certify mating, electrical compatibility, fabrication or powered use. Sources: S472: Product Features: PCB Connector Type, Contact Type, Contact Mating Location, mounting and mating alignment; Dimensions (length/height/width/flex thickness); Identification Marking

Report a correction to these facts →

Unknowns stay unknown.

The bottom mating contact location applies only to this exact part. The other TE part has a different position count and opposite contact location.
0.3 mm is accepted flex-cable thickness, not body thickness. Numbering, flex trace assignment, PCB land pattern and assembly approval remain unestablished.
No numbered electrical contact assignment, hardware test, specimen measurement, fabrication approval or complete application rating/derating is established.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

Back to first citation ↑

C362Esource checked

TE Connectivity · TE FPC bottom-contact connector part 1-2492104-0 ↗
TE Internal #1-2492104-0; Centerline 0.5 mm; Contact Mating Location Bottom; 10 Position; ZIF; Right Angle · Manufacturers describe the series or named example, not a complete compatible harness, exact pin assignment, or electrical approval. No independent hardware, manufacturing drawing, license or device-specific test was performed.

1 source record support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

1 linked sources · 1 scoped claims · 0 sources with inspection/access flags.

Page scope: No new drawing. Source-scoped original textual normalization only; source images and geometry were not copied or inferred.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-08. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 1 source scopes, access limits and dates

S472 · TE FPC bottom-contact connector part 1-2492104-0

TE Connectivity · Manufacturer / product-owner domain · inspected 2026-10-10 · due 2027-01-08

Within inspection window

Scoped support: Only the described first-party series or precise example part; no dimensioned geometry, assembly mating certification or arbitrary equipment compatibility.

Not established / limitations: Manufacturers describe the series or named example, not a complete compatible harness, exact pin assignment, or electrical approval. No independent hardware, manufacturing drawing, license or device-specific test was performed.

Locator: TE Internal #1-2492104-0; Centerline 0.5 mm; Contact Mating Location Bottom; 10 Position; ZIF; Right Angle

Trace 1 claims to their source records

C362E · P362

Claim scope: Only 1-2492104-0; no family-wide generalization.

Source links: S472 · Evidence trail → (private workspace)

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.