TE 5504008-series / 501381-1 example from 408-4151 Rev B, page 1. The stainless-steel ferrule is specific to that documented kit, not every ST product.
Source checked · no independent review claimed · Fabrication approved: no
View Exterior side viewDepiction Plug-style exteriorNot to scale · independent drawing review pending
Identification schematic only · not to scale · drawing review pending. No engineering drawing is published for this profile.
Contact count
Not asserted
Optical connector with keyed bayonet coupling
Mating boundary
Shape is not the verdict.
A matching ST coupling arrangement with independently verified fiber and endface requirements.
Orientation
How to read this profile
Interface identification and source-scoped construction only. No measured drawing, mirrored rear view, termination map or electrical pinout is supplied.
Source-scoped identification facts
Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.
Documented examples; not a mating drawing or compatibility approval
Connector role
optical connector subassembly (ExactCorning 730-1021-006-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 730-1021-006-B
Coupling / latch
bayonet (Claim C124A); quick-release bayonet (Named series/reference only, not every family part. AFL ST marketedconnector overview;not universalfamily mechanicaltolerance)S099 · S954Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. Identification and explicitly scoped documentation only; not an end-to-end connection approval Named series/reference only, not every family part. AFL ST marketedconnector overview;not universalfamily mechanicaltolerance
Manufacturer
Corning (ExactCorning 730-1021-006-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 730-1021-006-B
Exact part / implementation
730-1021-006-B (ExactCorning 730-1021-006-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 730-1021-006-B
View convention
ActualAFL linked ST exterioroblique illustration inspected;not scaled andnoexactSKUassigned (Named series/reference only, not every family part. AFL ST marketedconnector overview;not universalfamily mechanicaltolerance)S954Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. Named series/reference only, not every family part. AFL ST marketedconnector overview;not universalfamily mechanicaltolerance
Not recorded: Dimensions / axis, Mounting, Keying / polarization, Shell / form, Series, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.
Recorded variant and source limits
Fiber type, polish, optical loss budget and exact counterpart are separate checks.
No dimensioned mating interface or electrical contact map is published. Never look into a fiber to identify it.
TE’s 5504008-series ST kit example has an alignment key, metal coupling nut and stainless-steel ferrule. Its 501381-1 receptacle is described for joining two bayonet connectors.
AFL lists a nominal 2.5 mm ferrule for its ST connector overview. AFL describes quick-release bayonet(stick and twist) body.
AFL Hyperscale · Adapters and Connectors:Connectors ↗ Full manufacturer page: LC,SC,ST,FCsections and each directlylinked connector image; all4actual JPEGs downloaded/viewed. · Ferrule dimensions refer to AFL overview context, not universal housing/mating tolerances. Image-only latch/body observations remain labelled manufacturer illustrations; no measurements,partmarkings or performance from pixels.
C124Gsource checked
Corning OEM-064-AEN lists 730-1021-006-B as: ST single-mode subassembly; metal housing, no boot, yellow dust cap.
Corning · AFOP FastShip Connector and Adapter Ordering Guide OEM-064-AEN ↗ Full18-page PDF text: p.5ST/FC/SC,p.6LCno-logo variants,p.9MT-RJ,p.11ST/FCsubassemblies,p.18revision. · Direct download403 and drawing/photo pixels unavailable. Table126/127micrometre ferrule-size values are not imported as outer ferrule diameters; unspecified SCboot3micrometre transcription is excluded. Table colors are exact-part descriptors, not general family marks.
5 source records support this profile. No independent engineering review or hardware validation is claimed.
Page scope: No V76 drawing added; original recognition artwork remains unchanged and is not a fabrication reference.
Assessment 2026-10-22 · earliest scheduled source review 2027-01-01. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
TE Connectivity / Tyco Electronics · Manufacturer / product-owner domain · inspected 2026-10-07 · due 2027-01-05
Within inspection window
Scoped support: Named ST stainless-steel kit and bayonet-coupling example; revision B dated 2008-12-03.
Not established / limitations: Only page 1 was visually inspected. No assembly instructions, tolerances, fiber preparation dimensions or universal ferrule-material claim are reproduced. Parts of the PDF text layer are garbled; Figure 1 labels were visually checked.
Locator: Page 1: Figure 1 alignment key and ferrule labels; kit 5504008 series and coupling receptacle 501381-1.
Scoped support: Exact named connector/subassembly construction and named no-logo option; keep each role separate.
Not established / limitations: Direct download403 and drawing/photo pixels unavailable. Table126/127micrometre ferrule-size values are not imported as outer ferrule diameters; unspecified SCboot3micrometre transcription is excluded. Table colors are exact-part descriptors, not general family marks.
Locator: Full18-page PDF text: p.5ST/FC/SC,p.6LCno-logo variants,p.9MT-RJ,p.11ST/FCsubassemblies,p.18revision.
Scoped support: AFL marketed connector-series examples: stated ferrule nominal sizes and coupling mechanisms; no exact orderableSKU.
Not established / limitations: Ferrule dimensions refer to AFL overview context, not universal housing/mating tolerances. Image-only latch/body observations remain labelled manufacturer illustrations; no measurements,partmarkings or performance from pixels.
Locator: Full manufacturer page: LC,SC,ST,FCsections and each directlylinked connector image; all4actual JPEGs downloaded/viewed.
Trace 5 claims to their source records
C124A · P124
The ST guide identifies a round body with bayonet-style retention.
Claim scope: Identification and explicitly scoped documentation only; not an end-to-end connection approval
TE’s 5504008-series ST kit example has an alignment key, metal coupling nut and stainless-steel ferrule. Its 501381-1 receptacle is described for joining two bayonet connectors.
Claim scope: TE 408-4151 Rev B, page 1 only; named component example, not every ST ferrule or a fabrication drawing.
AFL lists a nominal 2.5 mm ferrule for its ST connector overview. AFL describes quick-release bayonet(stick and twist) body.
Claim scope: AFL ST marketedconnector overview;not universalfamily mechanicaltolerance;ferrulesize is not outerhousingdimension,contactpitch or sourceimage measurement.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
