FIELD GUIDESource-led reference

E029 · Source-scoped pinout variants

SATA 7-pin data connector engineering reference

Seven-contact SATA data identification plus a product-specific header pitch example.

Source checked · no independent review claimed · Fabrication approved: no

SATA 7-pin data engineering boundary reference original orientation schematic
Original pinout diagram; read the exact variant and view below. Not to scale.

Orientation

How to read this profile

Contact count only. V35 does not publish the full SATA signal map from the currently cleared evidence set.

Bounded dimensions

Only what the sources support

Source-scoped dimensions; not fabrication clearances
FieldValueScopeEvidence
Example product pitch1.27 mmexample component[C029B]

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts7S032 · S193Serial ATA data connector reference; nominal engineering count, not automatically positions, population or a device wiring map. Serial ATA data connector reference
Positions / cavity span7 (Claim C029B)S193Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Named product example only; contact count plus example pitch, excluding full SATA pin assignment and mating tolerances
Populated contacts7 (0678005021)S193Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 0678005021: Seven-circuit Serial ATA PCB header. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No physical wiring layout is reconstructed from product attributes; manufacturer labels online information limited.
Contact rows1 (0678005021)S193Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 0678005021: Seven-circuit Serial ATA PCB header. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No physical wiring layout is reconstructed from product attributes; manufacturer labels online information limited.
Contact pitch1.27 mm Example product pitch (Recorded example component); 1.27 mm Source-described pitch / centerline (Claim C029B)S193Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. example_component; Serial ATA data connector reference Named product example only; contact count plus example pitch, excluding full SATA pin assignment and mating tolerances
Mountingvertical surface-mount PCB connector (0678005021)S193Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 0678005021: Seven-circuit Serial ATA PCB header. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No physical wiring layout is reconstructed from product attributes; manufacturer labels online information limited.
Keying / polarizationmanufacturer reports keyed and polarized to mating part (0678005021)S193Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 0678005021: Seven-circuit Serial ATA PCB header. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No physical wiring layout is reconstructed from product attributes; manufacturer labels online information limited.
ManufacturerMolex (0678005021)S193Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 0678005021: Seven-circuit Serial ATA PCB header. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No physical wiring layout is reconstructed from product attributes; manufacturer labels online information limited.
Exact part / implementation0678005021 (0678005021)S193Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 0678005021: Seven-circuit Serial ATA PCB header. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. No physical wiring layout is reconstructed from product attributes; manufacturer labels online information limited.

Not recorded: Dimensions / axis, Connector role, Contact gender / arrangement, Coupling / latch, Shell / form, Series, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits
  • The 1.27 mm pitch is retained only for the named Molex example, not as a complete universal fabrication envelope.
  • Full SATA signal assignments and mating tolerances are not published in V35.
  • Seagate SkyHawk device plug, A/B pair names: Device plug mating face, contact surfaces visible and the separate 15-contact power segment to the right, as oriented by Toshiba MG07ACA p. 7: the seven-contact signal segment is to the left; S1 is the end away from the power segment and S7 is adjacent to it. This is not the solder side.
  • Toshiba MG07ACA device plug, explicit device direction: Device plug mating face, contact surfaces visible and the separate 15-contact power segment to the right, as oriented by Toshiba MG07ACA p. 7: the seven-contact signal segment is to the left; S1 is the end away from the power segment and S7 is adjacent to it. This is not the solder side.
Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

What the status labels mean
Confirmed
Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source
Only one underlying document, or one pass, supports this assignment.
Device-specific
Supported for the named equipment or wiring only. Check your device’s manual.
Unverified
Missing or conflicting evidence. Do not wire from this row.
Not connected
The source explicitly says NC, no contact or no pin for this wiring.
Wiring variant

Seagate SkyHawk device plug, A/B pair names

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Device plug mating face, contact surfaces visible and the separate 15-contact power segment to the right, as oriented by Toshiba MG07ACA p. 7: the seven-contact signal segment is to the left; S1 is the end away from the power segment and S7 is adjacent to it. This is not the solder side.

  • P029 SATA 7-pin — Agree (S1, S4, S7 ground; A+/A− and B−/B+ pairs) — SATA-IO spec paywalled; Seagate and Toshiba confirm.
  • The exact host-receptacle table was not retrieved. This report does not relabel device Rx as host Tx without citing a host-side source.
  • eSATA, powered eSATA, Slimline, Micro SATA and SATA Express contact maps are not established here; they must not inherit this seven-contact map merely by name.
SATA 7-pin data engineering boundary referenceDevice plug mating face, contact surfaces visible and the separate 15-contact power segment to the right, as oriented by Toshiba MG07ACA p. 7: the seven-contact signal segment is to the left; S1 is the end away from the power segment and S7 is adjacent to it. This is not the solder side.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualS1: Ground (device_specific)S1S2: A+ (device_specific)S2S3: A− (device_specific)S3S4: Ground (device_specific)S4S5: B− (device_specific)S5S6: B+ (device_specific)S6S7: Ground (device_specific)S7powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Seagate SkyHawk device plug, A/B pair names — source-scoped contact map
PinSignalWhat it doesStatus
S1GroundGround reference and return.Device-specific
Sources
S2A+Control, detection or configuration connection; check the source and device.Device-specific
Sources
S3A−Control, detection or configuration connection; check the source and device.Device-specific
Sources
S4GroundGround reference and return.Device-specific
Sources
S5B−Control, detection or configuration connection; check the source and device.Device-specific
Sources
S6B+Control, detection or configuration connection; check the source and device.Device-specific
Sources
S7GroundGround reference and return.Device-specific
Sources
Sources (2)

Toshiba MG07ACA device plug, explicit device direction

View and evidence limits

Device plug mating face, contact surfaces visible and the separate 15-contact power segment to the right, as oriented by Toshiba MG07ACA p. 7: the seven-contact signal segment is to the left; S1 is the end away from the power segment and S7 is adjacent to it. This is not the solder side.

  • P029 SATA 7-pin — Agree (S1, S4, S7 ground; A+/A− and B−/B+ pairs) — SATA-IO spec paywalled; Seagate and Toshiba confirm.
  • The exact host-receptacle table was not retrieved. This report does not relabel device Rx as host Tx without citing a host-side source.
  • eSATA, powered eSATA, Slimline, Micro SATA and SATA Express contact maps are not established here; they must not inherit this seven-contact map merely by name.
SATA 7-pin data engineering boundary referenceDevice plug mating face, contact surfaces visible and the separate 15-contact power segment to the right, as oriented by Toshiba MG07ACA p. 7: the seven-contact signal segment is to the left; S1 is the end away from the power segment and S7 is adjacent to it. This is not the solder side.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualS1: GND (single_source)S1S2: A+ (Device Rx+) (single_source)S2S3: A− (Device Rx−) (single_source)S3S4: GND (single_source)S4S5: B− (Device Tx−) (single_source)S5S6: B+ (Device Tx+) (single_source)S6S7: GND (single_source)S7powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Toshiba MG07ACA device plug, explicit device direction — source-scoped contact map
PinSignalWhat it doesStatus
S1GNDGround reference and return.Single source
Sources
S2A+ (Device Rx+)Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
S3A− (Device Rx−)Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
S4GNDGround reference and return.Single source
Sources
S5B− (Device Tx−)Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
S6B+ (Device Tx+)Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
S7GNDGround reference and return.Single source
Sources
Sources (1)

Unknowns stay unknown.

  • The 1.27 mm pitch is retained only for the named Molex example, not as a complete universal fabrication envelope.
  • Full SATA signal assignments and mating tolerances are not published in V35.

Your next step

Use the detail without guessing past its limits.

Source trail

Claims and sources

C029Asource checked

SATA data cables use a seven-contact connector distinct from the separate power connection.

StarTech.com · SATA18 data cable ↗
PDF p. 1: two seven-contact data receptacles; p. 3: Connector(s) table, visually inspected. · Exact SATA18 product description only. Seven-contact data receptacles do not establish separate SATA power wiring. No universal rate, length, dimensional or mating guarantee is adopted.

Back to first citation ↑
C029Bsource checked

A documented Molex Serial ATA header example has seven circuits and 1.27 mm pitch; that pitch is retained only as example-component geometry, not a complete universal SATA fabrication dimension.

Molex · Serial ATA 7-circuit header example 0678005021 ↗
General / product description; circuit count and pitch · Pitch is an example-component property, not asserted as a complete universal SATA fabrication envelope. V35 does not publish the full SATA signal assignment from this source.

C802Wsource checked

Seagate SkyHawk device plug, A/B pair names: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Seagate · SkyHawk SATA Product Manual, ST6000VX001 / ST4000VX005 / ST3000VX009 / ST2000VX012 ↗
printed p. 25 (PDF p. 26), §4.2, Table 8, Signal segment S1–S7; printed p. 22 §3.3 for cable endpoints · Source scope and unresolved evidence are preserved in the engineering variant.

Toshiba Electronic Devices & Storage Corporation · Enterprise Capacity HDD MG07ACA Series Product Manual / HDD Specifications ↗
p. 7/11, INTERFACE CONNECTOR, oblique mating-face drawing with Signal Segment S1 and Power Segment P1 arrows; p. 8/11, INTERFACE CONNECTOR (SATA plug) SIGNAL ALLOCATION, Signal Segment table · Source scope and unresolved evidence are preserved in the engineering variant.

C802Xsource checked

Toshiba MG07ACA device plug, explicit device direction: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Toshiba Electronic Devices & Storage Corporation · Enterprise Capacity HDD MG07ACA Series Product Manual / HDD Specifications ↗
p. 7/11, INTERFACE CONNECTOR, oblique mating-face drawing with Signal Segment S1 and Power Segment P1 arrows; p. 8/11, INTERFACE CONNECTOR (SATA plug) SIGNAL ALLOCATION, Signal Segment table · Source scope and unresolved evidence are preserved in the engineering variant.

4 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

4 linked sources · 4 scoped claims · 0 sources with inspection/access flags.

Page scope: No V35 engineering drawing; source scope supports count and example pitch, not a complete generic fabrication drawing.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-03. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 4 source scopes, access limits and dates

S032 · SATA18 data cable

StarTech.com · Manufacturer / product-owner domain · inspected 2026-10-07 · due 2027-01-05

Within inspection window

Scoped support: Seven-contact SATA data connector, not the separate power connector.

Not established / limitations: Exact SATA18 product description only. Seven-contact data receptacles do not establish separate SATA power wiring. No universal rate, length, dimensional or mating guarantee is adopted.

Locator: PDF p. 1: two seven-contact data receptacles; p. 3: Connector(s) table, visually inspected.

S193 · Serial ATA 7-circuit header example 0678005021

Molex · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Product-specific Serial ATA header example documenting seven circuits and 1.27 mm pitch.

Not established / limitations: Pitch is an example-component property, not asserted as a complete universal SATA fabrication envelope. V35 does not publish the full SATA signal assignment from this source.

Locator: General / product description; circuit count and pitch

S709 · SkyHawk SATA Product Manual, ST6000VX001 / ST4000VX005 / ST3000VX009 / ST2000VX012

Seagate · Unclassified publisher domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: printed p. 25 (PDF p. 26), §4.2, Table 8, Signal segment S1–S7; printed p. 22 §3.3 for cable endpoints

S710 · Enterprise Capacity HDD MG07ACA Series Product Manual / HDD Specifications

Toshiba Electronic Devices & Storage Corporation · Unclassified publisher domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 7/11, INTERFACE CONNECTOR, oblique mating-face drawing with Signal Segment S1 and Power Segment P1 arrows; p. 8/11, INTERFACE CONNECTOR (SATA plug) SIGNAL ALLOCATION, Signal Segment table

Trace 4 claims to their source records

C029A · P029

SATA data cables use a seven-contact connector distinct from the separate power connection.

Claim scope: Consumer identification / documented standard or product class only

Source links: S032 · Evidence trail → (private workspace)

C029B · P029

A documented Molex Serial ATA header example has seven circuits and 1.27 mm pitch; that pitch is retained only as example-component geometry, not a complete universal SATA fabrication dimension.

Claim scope: Named product example only; contact count plus example pitch, excluding full SATA pin assignment and mating tolerances

Source links: S193 · Evidence trail → (private workspace)

C802W · P029

Seagate SkyHawk device plug, A/B pair names: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S709 · S710 · Evidence trail → (private workspace)

C802X · P029

Toshiba MG07ACA device plug, explicit device direction: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S710 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.