E328 · Source-scoped pinout variants

SATA 15-pin power connector engineering reference

Named wiring from the pinout research; connector shape alone does not establish capabilities.

Open field note Source trail

Source checked · no independent review claimed · Fabrication approved: no

SATA 15-pin power connector engineering reference original orientation schematic — Original pinout diagram; read the exact variant and view below. Not to scale.

Contact count

Not asserted

Source-scoped connector interface

Mating boundary

Shape is not the verdict.

Check the exact device and mating connector.

Orientation

How to read this profile

Read the exact variant view convention. Schematic layouts do not establish physical positions.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts	15S200Position count is an identification aid; V36 does not publish the electrical assignment.
Positions / cavity span	15 (Claim C194A); 7 (Claim C194B); 15 (Claim C194C)S200 · S583 · S577 · S583Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V36 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction or end-to-end compatibility proof. V140 / Source-scoped historical or exact-part identity only. No wiring, pinout, universal fit, cable/terminal assembly, device rating, fabrication or publication approval.
Contact rows	1 (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.
Contact pitch	1.27 mm mating interface (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.
Connector role	socket (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.
Keying / polarization	Keying to mating part:yes; mating lock:no; polarized-to-mating:no per catalog (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.
Manufacturer	Molex (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.
Series	67582 (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.
Exact part / implementation	675820000 (675820000)S910Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 675820000. Documented role: socket. 15positions maximum and5terminal sets per housing. Unloaded housing is not a measured15-contact specimen.; Molex labels limited information; do not replace explicit keying/polarization distinctions with a generic L-key statement.

Not recorded: Populated contacts, Dimensions / axis, Contact gender / arrangement, Mounting, Coupling / latch, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

Check the exact device manual before wiring or applying power.
Seagate Laptop SSHD SATA legacy connector table: Table 8 device-plug power segment. Physical mating-face left/right is not established by this table.
SATA Revision 3.0 device power segment: Device-plug P1-P15; Figure 30 on p. 83 marks pin P1 and the connector keys.
Seagate Exos Xz ST32000NM001F / ST30000NM011F device power: Named drive device-plug P1-P15; Table 5 provides electrical identity, not a mating-face left/right drawing.

Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

Dark pinout view

What the status labels mean

Confirmed: Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source: Only one underlying document, or one pass, supports this assignment.
Device-specific: Supported for the named equipment or wiring only. Check your device’s manual.
Unverified: Missing or conflicting evidence. Do not wire from this row.
Not connected: The source explicitly says NC, no contact or no pin for this wiring.

Wiring variantSeagate Laptop SSHD SATA legacy connector table

Seagate Laptop SSHD SATA legacy connector table

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Table 8 device-plug power segment. Physical mating-face left/right is not established by this table.

P194 SATA 15-pin power — **Agree** on legacy rail positions; **P3/P11 are variant-dependent** — A: Seagate Laptop SSHD. B: SATA 3.0 Gold and Seagate Exos Xz. Legacy P3 is 3.3 V/pre-charge; the named Exos P3 is PWRDIS. P11 activity/staggered-spin-up or grounded behavior remains source/device-specific. B notes unused Exos rails without converting "not used" to an internal NC. Different Seagate manuals plus a separate standards document.
This legacy table assigns P3 to 3.3 V. PWDIS/DEVSLP variants and unsupported rails in other drives are not established by this source.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Seagate Laptop SSHD SATA legacy connector table — source-scoped contact map
Pin	Signal	What it does	Status
P1	V33	Power connection (V33). Check the specified supply.	Device-specific Sources
P2	V33	Power connection (V33). Check the specified supply.	Device-specific Sources
P3	V33	Power connection (V33). Check the specified supply.	Device-specific Sources
P4	Ground	Ground reference and return.	Device-specific Sources
P5	Ground	Ground reference and return.	Device-specific Sources
P6	Ground	Ground reference and return.	Device-specific Sources
P7	V5	Power connection (V5). Check the specified supply.	Device-specific Sources
P8	V5	Power connection (V5). Check the specified supply.	Device-specific Sources
P9	V5	Power connection (V5). Check the specified supply.	Device-specific Sources
P10	Ground	Ground reference and return.	Device-specific Sources
P11	Ground or LED signal	Ground reference and return.	Device-specific Sources
P12	Ground	Ground reference and return.	Device-specific Sources
P13	V12	Power connection (V12). Check the specified supply.	Device-specific Sources
P14	V12	Power connection (V12). Check the specified supply.	Device-specific Sources
P15	V12	Power connection (V12). Check the specified supply.	Device-specific Sources

Sources (1)

S771 · Seagate Technology · Seagate Laptop SSHD SATA Product Manual
100716627, Rev. E · printed p.19 (PDF p.24), §6.2 Table 8 Serial ATA Connector Pin Definitions, power segment and mating notes

SATA Revision 3.0 device power segment

View and evidence limits

Device-plug P1-P15; Figure 30 on p. 83 marks pin P1 and the connector keys.

P194 SATA 15-pin power — **Agree** on legacy rail positions; **P3/P11 are variant-dependent** — A: Seagate Laptop SSHD. B: SATA 3.0 Gold and Seagate Exos Xz. Legacy P3 is 3.3 V/pre-charge; the named Exos P3 is PWRDIS. P11 activity/staggered-spin-up or grounded behavior remains source/device-specific. B notes unused Exos rails without converting "not used" to an internal NC. Different Seagate manuals plus a separate standards document.
The 2009 standard variant assigns P3 to 3.3 V pre-charge; the named 2024 Seagate variant uses optional PWRDIS. These variants must not be combined or applied solely from the connector shape.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

SATA Revision 3.0 device power segment — source-scoped contact map
Pin	Signal	What it does	Status
P1	V33	Power connection (V33). Check the specified supply.	Single source Sources
P2	V33	Power connection (V33). Check the specified supply.	Single source Sources
P3	V33	Power connection (V33). Check the specified supply.	Single source Sources
P4	GND	Ground reference and return.	Single source Sources
P5	GND	Ground reference and return.	Single source Sources
P6	GND	Ground reference and return.	Single source Sources
P7	V5	Power connection (V5). Check the specified supply.	Single source Sources
P8	V5	Power connection (V5). Check the specified supply.	Single source Sources
P9	V5	Power connection (V5). Check the specified supply.	Single source Sources
P10	GND	Ground reference and return.	Single source Sources
P11	DAS/DSS	Control, detection or configuration connection; check the source and device.	Single source Sources
P12	GND	Ground reference and return.	Single source Sources
P13	V12	Power connection (V12). Check the specified supply.	Single source Sources
P14	V12	Power connection (V12). Check the specified supply.	Single source Sources
P15	V12	Power connection (V12). Check the specified supply.	Single source Sources

Sources (1)

S745 · Serial ATA International Organization (SATA-IO) · Serial ATA Revision 3.0
Gold Revision, June 2, 2009 · p. 82, section 6.1.3.2, Table 3 Signal and Power SATA Plug and Nominal Mate Sequence

Seagate Exos Xz ST32000NM001F / ST30000NM011F device power

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Named drive device-plug P1-P15; Table 5 provides electrical identity, not a mating-face left/right drawing.

P194 SATA 15-pin power — **Agree** on legacy rail positions; **P3/P11 are variant-dependent** — A: Seagate Laptop SSHD. B: SATA 3.0 Gold and Seagate Exos Xz. Legacy P3 is 3.3 V/pre-charge; the named Exos P3 is PWRDIS. P11 activity/staggered-spin-up or grounded behavior remains source/device-specific. B notes unused Exos rails without converting "not used" to an internal NC. Different Seagate manuals plus a separate standards document.
The 2009 standard variant assigns P3 to 3.3 V pre-charge; the named 2024 Seagate variant uses optional PWRDIS. These variants must not be combined or applied solely from the connector shape.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Seagate Exos Xz ST32000NM001F / ST30000NM011F device power — source-scoped contact map
Pin	Signal	What it does	Status
P1	V33 (not used)	Power connection (V33 (not used)). Check the specified supply.	Device-specific Sources
P2	V33 (not used)	Power connection (V33 (not used)). Check the specified supply.	Device-specific Sources
P3	PWRDIS	Control, detection or configuration connection; check the source and device.	Device-specific Sources
P4	Ground	Ground reference and return.	Device-specific Sources
P5	Ground	Ground reference and return.	Device-specific Sources
P6	Ground	Ground reference and return.	Device-specific Sources
P7	V5	Power connection (V5). Check the specified supply.	Device-specific Sources
P8	V5	Power connection (V5). Check the specified supply.	Device-specific Sources
P9	V5	Power connection (V5). Check the specified supply.	Device-specific Sources
P10	Ground	Ground reference and return.	Device-specific Sources
P11	Ground or LED signal	Ground reference and return.	Device-specific Sources
P12	Ground	Ground reference and return.	Device-specific Sources
P13	V12	Power connection (V12). Check the specified supply.	Device-specific Sources
P14	V12	Power connection (V12). Check the specified supply.	Device-specific Sources
P15	V12	Power connection (V12). Check the specified supply.	Device-specific Sources

Sources (1)

S772 · Seagate Technology LLC · Exos Xz SATA Product Manual
207805700, Rev B, May 2024 · printed p. 24 (PDF p. 25), section 4.2, Table 5 Serial ATA connector pin definitions, Power segment

Unknowns stay unknown.

Check the exact device manual before wiring or applying power.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C806Usource checked

Seagate Laptop SSHD SATA legacy connector table: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Seagate Technology · Seagate Laptop SSHD SATA Product Manual ↗
printed p.19 (PDF p.24), §6.2 Table 8 Serial ATA Connector Pin Definitions, power segment and mating notes · Source scope and unresolved evidence are preserved in the engineering variant.

C806Vsource checked

SATA Revision 3.0 device power segment: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Serial ATA International Organization (SATA-IO) · Serial ATA Revision 3.0 ↗
p. 119, section 6.2.4.5, Table 10 Signal and Power Internal Micro SATA Plug and Nominal Mate Sequence, including notes 4-6; p. 69, Figure 17 SATA Cable / Connector Connection Diagram; p. 149 section 6.5.1 opposite host/device definitions; p. 82, section 6.1.3.2, Table 3 Signal and Power SATA Plug and Nominal Mate Sequence; p. 83, Figure 30 Connector Pin and Feature Locations; pp. 131-132, Table 13 Slimline Device plug connector pin definition and Figure 76 Slimline Connector Pin and Feature Locations; pp. 149-153, section 6.5.1; Figure 93 cable receptacle, Figure 94 RA SMT plug and Figure 95 reversed-pinout version · Source scope and unresolved evidence are preserved in the engineering variant.

C806Wsource checked

Seagate Exos Xz ST32000NM001F / ST30000NM011F device power: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Seagate Technology LLC · Exos Xz SATA Product Manual ↗
printed p. 24 (PDF p. 25), section 4.2, Table 5 Serial ATA connector pin definitions, Power segment · Source scope and unresolved evidence are preserved in the engineering variant.

3 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

3 linked sources · 3 scoped claims · 0 sources with inspection/access flags.

Page scope: Original schematic; not to scale and not fabrication approval.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-19. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 3 source scopes, access limits and dates

S745 · Serial ATA Revision 3.0

Serial ATA International Organization (SATA-IO) · Unclassified publisher domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 119, section 6.2.4.5, Table 10 Signal and Power Internal Micro SATA Plug and Nominal Mate Sequence, including notes 4-6; p. 69, Figure 17 SATA Cable / Connector Connection Diagram; p. 149 section 6.5.1 opposite host/device definitions; p. 82, section 6.1.3.2, Table 3 Signal and Power SATA Plug and Nominal Mate Sequence; p. 83, Figure 30 Connector Pin and Feature Locations; pp. 131-132, Table 13 Slimline Device plug connector pin definition and Figure 76 Slimline Connector Pin and Feature Locations; pp. 149-153, section 6.5.1; Figure 93 cable receptacle, Figure 94 RA SMT plug and Figure 95 reversed-pinout version

S771 · Seagate Laptop SSHD SATA Product Manual

Seagate Technology · Unclassified publisher domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: printed p.19 (PDF p.24), §6.2 Table 8 Serial ATA Connector Pin Definitions, power segment and mating notes

S772 · Exos Xz SATA Product Manual

Seagate Technology LLC · Unclassified publisher domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: printed p. 24 (PDF p. 25), section 4.2, Table 5 Serial ATA connector pin definitions, Power segment

Trace 3 claims to their source records

C806U · P194

Seagate Laptop SSHD SATA legacy connector table: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S771 · Evidence trail → (private workspace)

C806V · P194

SATA Revision 3.0 device power segment: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S745 · Evidence trail → (private workspace)

C806W · P194

Seagate Exos Xz ST32000NM001F / ST30000NM011F device power: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S772 · Evidence trail → (private workspace)

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.