E012 · Source-scoped pinout variants

Mini DisplayPort connector engineering reference

A TE Mini DisplayPort receptacle example is 20-position. Some products reused this physical form for Thunderbolt 1/2, so exact-device evidence is required before assigning protocol capability.

Open field note Source trail

Source checked · no independent review claimed · Fabrication approved: no

Mini DisplayPort engineering reference original orientation schematic — Original pinout diagram; read the exact variant and view below. Not to scale.

Contact count

20

plug and receptacle interface

Mating boundary

Shape is not the verdict.

Mini DisplayPort-form plug ↔ matching Mini DisplayPort-form receptacle

Orientation

How to read this profile

Contact count only; no numbered mating-face layout or fabrication geometry is reproduced.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts	20S016 · S369plug and receptacle interface; nominal engineering count, not automatically positions, population or a device wiring map. plug and receptacle interface
Positions / cavity span	20 (Claim C012B)S369Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Mini DisplayPort connector-form contact count only; DisplayPort revision and Thunderbolt capability are not inferred.
Contact rows	2 (DellU2415 Mini DisplayPort connected signal cable)S681Qualified exact source facts only; counterpart, mounting-acceptance, cable, port, termination and assembly context remains separately labelled in variant_notes. Exact DellU2415 manual Mini DisplayPort connected-cable face, not TE2129320-3 four-row PCB termination. Quantity context: Two physical contact rows in source connected-signal-cable face.
Contact pitch	0.6 mm manufacturer-reported centerline or mating-interface pitch (2129320-3)S369Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 2129320-3: Mini DisplayPort PCB receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Existing4-row source value retained; no assertion that every Mini DisplayPort product shares these tail dimensions.
Dimensions / axis	1.4 mm termination post and tail length (2129320-3)S369Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 2129320-3: Mini DisplayPort PCB receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Existing4-row source value retained; no assertion that every Mini DisplayPort product shares these tail dimensions.
Connector role	plug; socket; socket (2129320-3)S016 · S369 · S369Separate exact examples; retain each value’s source, role, axis and part scope. plug and receptacle interface Exact named example 2129320-3: Mini DisplayPort PCB receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Existing4-row source value retained; no assertion that every Mini DisplayPort product shares these tail dimensions.
Mounting	through-hole (Claim C012D); right-angle top-mount through-hole solder with boardlock (2129320-3)S609 · S369Separate exact examples; retain each value’s source, role, axis and part scope. V146: Four-row refers to board termination, not four rows inside the opening. Source orientation only; no Thunderbolt capability or universal device up direction. Exact named example 2129320-3: Mini DisplayPort PCB receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Existing4-row source value retained; no assertion that every Mini DisplayPort product shares these tail dimensions.
Manufacturer	TE Connectivity (2129320-3)S609Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V146: Four-row refers to board termination, not four rows inside the opening. Source orientation only; no Thunderbolt capability or universal device up direction.
Series	Mini DisplayPort (2129320-3)S609Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V146: Four-row refers to board termination, not four rows inside the opening. Source orientation only; no Thunderbolt capability or universal device up direction.
Exact part / implementation	2129320-3 (2129320-3)S609Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V146: Four-row refers to board termination, not four rows inside the opening. Source orientation only; no Thunderbolt capability or universal device up direction.
View convention	DellU2415 connected-signal-cable face: labels19/1 across upper contact row and20/2 across lower contact row. (DellU2415 Mini DisplayPort connected signal cable)S681Qualified exact source facts only; counterpart, mounting-acceptance, cable, port, termination and assembly context remains separately labelled in variant_notes. Exact DellU2415 manual cable-face convention only; no PCB/wire-side map, universal orientation, new contact assignments or equipment approval.

Not recorded: Populated contacts, Contact gender / arrangement, Coupling / latch, Keying / polarization, Shell / form, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

The same physical form can appear with different protocol capability; exact-device evidence is required.
No universal fabrication dimensions or signal map are published in V54.
NXP AN10873 mini-DP source-side connector pin list: Source-side connector; contact numbers only.
Wilder Technologies mDP-TPA test adapter plug/receptacle (device-specific, source and sink lane names): Contact numbers only.
Source-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-1): Top row odd pins, bottom row even pins.
Sink-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-2); e.g., Dell U2415/U2414H Mini DP input: Dell receptacle face: pin 1 top-right, 2 bottom-right, 19 top-left, 20 bottom-left.
Prior view context (not a source-view value): Contact count only; no numbered mating-face layout or fabrication geometry is reproduced.
Retained rows context (excluded from normalized contact/body field): 4. TE drawing C-2129320 D1 shows 2129320-3 as a reversed-offset Mini DisplayPort receptacle with four-row through-hole board termination; the mounting-side PCB layout is distinct from the mating face. | V146: Four-row refers to board termination, not four rows inside the opening. Source orientation only; no Thunderbolt capability or universal device up direction. Sources: S609: Revision D1; all five sheets visually inspected. Sheet 3 explicitly shows 2129320-3; sheet 5 is the reference PCB layout, mounting-side view. No revision date asserted.

Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

Dark pinout view

What the status labels mean

Confirmed: Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source: Only one underlying document, or one pass, supports this assignment.
Device-specific: Supported for the named equipment or wiring only. Check your device’s manual.
Unverified: Missing or conflicting evidence. Do not wire from this row.
Not connected: The source explicitly says NC, no contact or no pin for this wiring.

Wiring variantNXP AN10873 mini-DP source-side connector pin list

NXP AN10873 mini-DP source-side connector pin list

View and evidence limits

Source-side connector; contact numbers only.

P012 Mini DisplayPort — **Agree** on the source side (VESA via B, NXP AN10873 via A) and the sink side (VESA via B, Wilder test adapter via A), including the lane reversal on the sink — B's VESA copy is from a third-party mirror (flagged in its JSON). B recorded that Dell's U2414H/U2415 sink tables contradict themselves, and followed VESA.
The VESA mDP standard is available to VESA members/purchasers; it was not obtained from VESA. A copy on a personal website was not used. Rows rely on NXP and Wilder Technologies documents.
Neither cited document defines the CONFIG pin functions, DP_PWR voltage/current for mini-DP, or whether cables carry pin 20.
Not researched; no Thunderbolt pin assignment is implied.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

NXP AN10873 mini-DP source-side connector pin list — source-scoped contact map
Pin	Signal	What it does	Status
1	GND	Ground reference and return.	Single source Sources
2	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Single source Sources
3	ML_Lane 0 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
4	CONFIG1	Control, detection or configuration connection; check the source and device.	Single source Sources
5	ML_Lane 0 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
6	CONFIG2	Control, detection or configuration connection; check the source and device.	Single source Sources
7	GND	Ground reference and return.	Single source Sources
8	GND	Ground reference and return.	Single source Sources
9	ML_Lane 1 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
10	ML_Lane 3 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
11	ML_Lane 1 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
12	ML_Lane 3 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
13	GND	Ground reference and return.	Single source Sources
14	GND	Ground reference and return.	Single source Sources
15	ML_Lane 2 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
16	AUX CH (p)	Control, detection or configuration connection; check the source and device.	Single source Sources
17	ML_Lane 2 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
18	AUX CH (n)	Control, detection or configuration connection; check the source and device.	Single source Sources
19	GND	Ground reference and return.	Single source Sources
20	DP_PWR	Control, detection or configuration connection; check the source and device.	Single source Sources

Sources (1)

S678 · NXP Semiconductors · AN10873 PTN3392 application design reference manual
Rev. 1.1, 17 November 2016 · Section 2 (DisplayPort connectors), Table 2 '20-pin mini-DP connector pin list (for source-side connector)', p. 9 of 33

Wilder Technologies mDP-TPA test adapter plug/receptacle (device-spe…

Wilder Technologies mDP-TPA test adapter plug/receptacle (device-specific, source and sink lane names)

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Contact numbers only.

P012 Mini DisplayPort — **Agree** on the source side (VESA via B, NXP AN10873 via A) and the sink side (VESA via B, Wilder test adapter via A), including the lane reversal on the sink — B's VESA copy is from a third-party mirror (flagged in its JSON). B recorded that Dell's U2414H/U2415 sink tables contradict themselves, and followed VESA.
Device-specific: pins 4 and 6 are pulled to ground by the adapter; the standard CONFIG1/CONFIG2 names come from the NXP variant.
The VESA mDP standard is available to VESA members/purchasers; it was not obtained from VESA. A copy on a personal website was not used. Rows rely on NXP and Wilder Technologies documents.
Neither cited document defines the CONFIG pin functions, DP_PWR voltage/current for mini-DP, or whether cables carry pin 20.
Not researched; no Thunderbolt pin assignment is implied.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Wilder Technologies mDP-TPA test adapter plug/receptacle (device-specific, source and sink lane names) — source-scoped contact map
Pin	Signal	What it does	Status
1	Ground	Ground reference and return.	Device-specific Sources
2	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Device-specific Sources
3	ML Lane 0 (p) - Source / ML Lane 3 (n) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
4	Pulled to Ground	Control, detection or configuration connection; check the source and device.	Device-specific Sources
5	ML Lane 0 (n) - Source / ML Lane 3 (p) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
6	Pulled to Ground	Control, detection or configuration connection; check the source and device.	Device-specific Sources
7	Ground	Ground reference and return.	Device-specific Sources
8	Ground	Ground reference and return.	Device-specific Sources
9	ML Lane 1 (p) - Source / ML Lane 2 (n) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
10	ML Lane 3 (p) - Source / ML Lane 0 (n) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
11	ML Lane 1 (n) - Source / ML Lane 2 (p) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
12	ML Lane 3 (n) - Source / ML Lane 0 (p) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
13	Ground	Ground reference and return.	Device-specific Sources
14	Ground	Ground reference and return.	Device-specific Sources
15	ML Lane 2 (p) - Source / ML Lane 1 (n) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
16	AUX CH (p)	Control, detection or configuration connection; check the source and device.	Device-specific Sources
17	ML Lane 2 (n) - Source / ML Lane 1 (p) - Sink	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
18	AUX CH (n)	Control, detection or configuration connection; check the source and device.	Device-specific Sources
19	Ground	Ground reference and return.	Device-specific Sources
20	DP_PWR	Control, detection or configuration connection; check the source and device.	Device-specific Sources

Sources (1)

S679 · Wilder Technologies · Mini DisplayPort Test Adapter (mDP-TPA) User Manual
Document No. 910-0007-000 Rev. F (copyright 2010, 2011, 2012) · Table 4 'Mini DisplayPort Plug and Receptacle Pin Assignments', p. 18

Source-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-1)

View and evidence limits

Top row odd pins, bottom row even pins.

P012 Mini DisplayPort — **Agree** on the source side (VESA via B, NXP AN10873 via A) and the sink side (VESA via B, Wilder test adapter via A), including the lane reversal on the sink — B's VESA copy is from a third-party mirror (flagged in its JSON). B recorded that Dell's U2414H/U2415 sink tables contradict themselves, and followed VESA.
Applies to source devices (e.g., computer outputs).
Both Dell guides print the same table. It lists ML3(n) at both pins 3 and 5 and ML0(p) at both pins 10 and 12, which is internally impossible, and GND at 4 and 6. VESA Table 2-2 gives ML_Lane 3 (p) at 5, ML_Lane 0 (n) at 10, and CONFIG1/CONFIG2 (pulled down to ground) at 4/6. Rows follow VESA, and Dell is cited only where it agrees. The two Dell guides share one table, so they are not independent of each other.
Source-side rows rest on the VESA standard alone. No manufacturer source-device document (graphics card or computer) was obtained.
The VESA PDF came from a third-party mirror (glenwing.github.io), not from VESA. Its SHA-256 is recorded so it can be compared against a member copy.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Source-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-1) — source-scoped contact map
Pin	Signal	What it does	Status
1	GND	Ground reference and return.	Single source Sources
2	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Single source Sources
3	ML_Lane 0 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
4	CONFIG1	Control, detection or configuration connection; check the source and device.	Single source Sources
5	ML_Lane 0 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
6	CONFIG2	Control, detection or configuration connection; check the source and device.	Single source Sources
7	GND	Ground reference and return.	Single source Sources
8	GND	Ground reference and return.	Single source Sources
9	ML_Lane 1 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
10	ML_Lane 3 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
11	ML_Lane 1 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
12	ML_Lane 3 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
13	GND	Ground reference and return.	Single source Sources
14	GND	Ground reference and return.	Single source Sources
15	ML_Lane 2 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
16	AUX_CH (p)	Control, detection or configuration connection; check the source and device.	Single source Sources
17	ML_Lane 2 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
18	AUX_CH (n)	Control, detection or configuration connection; check the source and device.	Single source Sources
19	GND	Ground reference and return.	Single source Sources
20	DP_PWR	Control, detection or configuration connection; check the source and device.	Single source Sources

Sources (1)

S680 · Video Electronics Standards Association (VESA) · VESA Mini DisplayPort Connector Standard
Version 1.0, October 26, 2009 · Sec. 2.1.3.1, Table 2-1 Source-Side Mini DisplayPort Connector Pin Assignment and notes 1-2, p. 16 of 35

Sink-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-2); e.g.,…

Sink-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-2); e.g., Dell U2415/U2414H Mini DP input

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Dell receptacle face: pin 1 top-right, 2 bottom-right, 19 top-left, 20 bottom-left.

P012 Mini DisplayPort — **Agree** on the source side (VESA via B, NXP AN10873 via A) and the sink side (VESA via B, Wilder test adapter via A), including the lane reversal on the sink — B's VESA copy is from a third-party mirror (flagged in its JSON). B recorded that Dell's U2414H/U2415 sink tables contradict themselves, and followed VESA.
VESA says sinks should preferably use full-size DP. If they use mDP they must use this lane-reversed pinout.
Both Dell guides print the same table. It lists ML3(n) at both pins 3 and 5 and ML0(p) at both pins 10 and 12, which is internally impossible, and GND at 4 and 6. VESA Table 2-2 gives ML_Lane 3 (p) at 5, ML_Lane 0 (n) at 10, and CONFIG1/CONFIG2 (pulled down to ground) at 4/6. Rows follow VESA, and Dell is cited only where it agrees. The two Dell guides share one table, so they are not independent of each other.
Source-side rows rest on the VESA standard alone. No manufacturer source-device document (graphics card or computer) was obtained.
The VESA PDF came from a third-party mirror (glenwing.github.io), not from VESA. Its SHA-256 is recorded so it can be compared against a member copy.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Sink-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-2); e.g., Dell U2415/U2414H Mini DP input — source-scoped contact map
Pin	Signal	What it does	Status
1	GND	Ground reference and return.	Device-specific Sources
2	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Device-specific Sources
3	ML_Lane 3 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
4	CONFIG1	Control, detection or configuration connection; check the source and device.	Device-specific Sources
5	ML_Lane 3 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
6	CONFIG2	Control, detection or configuration connection; check the source and device.	Device-specific Sources
7	GND	Ground reference and return.	Device-specific Sources
8	GND	Ground reference and return.	Device-specific Sources
9	ML_Lane 2 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
10	ML_Lane 0 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
11	ML_Lane 2 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
12	ML_Lane 0 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
13	GND	Ground reference and return.	Device-specific Sources
14	GND	Ground reference and return.	Device-specific Sources
15	ML_Lane 1 (n)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
16	AUX_CH (p)	Control, detection or configuration connection; check the source and device.	Device-specific Sources
17	ML_Lane 1 (p)	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
18	AUX_CH (n)	Control, detection or configuration connection; check the source and device.	Device-specific Sources
19	GND	Ground reference and return.	Device-specific Sources
20	DP_PWR	Control, detection or configuration connection; check the source and device.	Device-specific Sources

Sources (3)

S680 · Video Electronics Standards Association (VESA) · VESA Mini DisplayPort Connector Standard
Version 1.0, October 26, 2009 · Sec. 2.1.3.1, Table 2-2 Sink-Side Mini DisplayPort Connector Pin Assignment and notes 1-2, p. 17 of 35
S681 · Dell Inc. · Dell UltraSharp U2415 User's Guide
English edition as served on 2026-10-21 (no revision code captured) · About Your Monitor > Pin Assignments > 'Mini DisplayPort Connector' figure and table, p. 19
S682 · Dell Inc. · Dell UltraSharp U2414H User's Guide
English edition as served on 2026-10-21 (no revision code captured) · About Your Monitor > Pin Assignments > 'Mini DisplayPort Connector' figure and table, p. 17

Unknowns stay unknown.

The same physical form can appear with different protocol capability; exact-device evidence is required.
No universal fabrication dimensions or signal map are published in V54.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C012Asource checked

Mini DisplayPort shares its connector shape with Thunderbolt 1 and 2, but their functions are not identical.

Apple · Identify the ports on your Mac ↗
Mini DisplayPort and Thunderbolt / Thunderbolt 2 sections ·

C012Bsource checked

TE's cited Mini DisplayPort receptacle is a 20-position connector example; the same physical form can appear in contexts whose protocol capability must be established from the exact device rather than shape alone.

TE Connectivity · TE 2129320-3 Mini DisplayPort connector ↗
Configuration features: Mini DisplayPort receptacle; 20 positions · The connector form alone does not establish DisplayPort revision or distinguish native Mini DisplayPort use from products that reused the same physical form for Thunderbolt 1/2.

C801Dsource checked

NXP AN10873 mini-DP source-side connector pin list: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

NXP Semiconductors · AN10873 PTN3392 application design reference manual ↗
Section 2 (DisplayPort connectors), Table 2 '20-pin mini-DP connector pin list (for source-side connector)', p. 9 of 33 · Source scope and unresolved evidence are preserved in the engineering variant.

C801Esource checked

Wilder Technologies mDP-TPA test adapter plug/receptacle (device-specific, source and sink lane names): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Wilder Technologies · Mini DisplayPort Test Adapter (mDP-TPA) User Manual ↗
Table 4 'Mini DisplayPort Plug and Receptacle Pin Assignments', p. 18 · Source scope and unresolved evidence are preserved in the engineering variant.

C801Fsource checked

Source-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-1): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Video Electronics Standards Association (VESA) · VESA Mini DisplayPort Connector Standard ↗
Sec. 2.1.3.1, Table 2-1 Source-Side Mini DisplayPort Connector Pin Assignment and notes 1-2, p. 16 of 35; Sec. 2.1.3.1, Table 2-2 Sink-Side Mini DisplayPort Connector Pin Assignment and notes 1-2, p. 17 of 35 · Source scope and unresolved evidence are preserved in the engineering variant.

C801Gsource checked

Sink-side Mini DisplayPort connector (VESA mDP 1.0 Table 2-2); e.g., Dell U2415/U2414H Mini DP input: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Dell Inc. · Dell UltraSharp U2415 User's Guide ↗
About Your Monitor > Pin Assignments > 'Mini DisplayPort Connector' figure and table, p. 19 · Source scope and unresolved evidence are preserved in the engineering variant.

Dell Inc. · Dell UltraSharp U2414H User's Guide ↗
About Your Monitor > Pin Assignments > 'Mini DisplayPort Connector' figure and table, p. 17 · Source scope and unresolved evidence are preserved in the engineering variant.

7 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

7 linked sources · 6 scoped claims · 0 sources with inspection/access flags.

Page scope: No V54 engineering drawing is published for this profile; the sidecar is intentionally limited to source-backed contact/interface context.

Assessment 2026-10-22 · earliest scheduled source review 2026-12-30. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 7 source scopes, access limits and dates

S016 · Identify the ports on your Mac

Apple · Manufacturer / product-owner domain · inspected 2026-10-01 · due 2026-12-30

Within inspection window

Scoped support: Mini DisplayPort and early Thunderbolt share a connector shape, not identical functionality.

Not established / limitations:

Locator: Mini DisplayPort and Thunderbolt / Thunderbolt 2 sections

S369 · TE 2129320-3 Mini DisplayPort connector

TE Connectivity · Manufacturer / product-owner domain · inspected 2026-10-06 · due 2027-01-04

Within inspection window

Scoped support: Manufacturer example supporting the 20-position contact count for the Mini DisplayPort connector form.

Not established / limitations: The connector form alone does not establish DisplayPort revision or distinguish native Mini DisplayPort use from products that reused the same physical form for Thunderbolt 1/2.

Locator: Configuration features: Mini DisplayPort receptacle; 20 positions