FIELD GUIDESource-led reference
Port & Cable

E213 · Contact count only

IEC 60320 C7 cord connector engineering reference

IEC 60320 C7/C8 Class II non-grounded appliance-coupler pair. Current source example: Exact source example 6013.0474: construction: Cordset C7 connector;black PVC moulded housing;protection class II. rating: IEC2.5A250VAC50Hz. pin temperature c: 70. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product. No physical compatibility, pin map or hardware validation is established.

Open field noteSource trail

Source checked · no independent review claimed · Fabrication approved: no

IEC 60320 C7 cord connector engineering boundary original orientation schematic
Original V40 engineering boundary schematic; not to scale and not a fabrication, gauging, wiring or mating-face locator drawing.

Orientation

How to read this profile

No mating-face pin numbering is published in V40; count and absence of protective-earth contact are the bounded facts.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts2S220Source-backed nominal position count: 2.
Connector rolesocket (6013.0474)S603Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6013.0474. Documented role: socket. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.
Mountingcable (Claim C213A)S220Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V39 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction, protocol guarantee or end-to-end compatibility proof.
ManufacturerSCHURTER (6013.0474)S603Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6013.0474. Documented role: socket. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.
Series6013.0474 (6013.0474)S603Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6013.0474. Documented role: socket. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.
Exact part / implementation6013.0474 (6013.0474)S603Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6013.0474. Documented role: socket. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.

Not recorded: Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Coupling / latch, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits
  • Contact/pole count does not establish terminal placement, conductor colors, voltage compatibility or safe substitution.
  • No fabrication dimensions, live-work procedure or device-level electrical approval is published.
Report a correction to these facts →

Unknowns stay unknown.

  • Contact/pole count does not establish terminal placement, conductor colors, voltage compatibility or safe substitution.
  • No fabrication dimensions, live-work procedure or device-level electrical approval is published.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C213Bsource checked

Interpower identifies C7/C8 as the non-grounded Class II pair; V40 normalizes that as a two-pole, no-protective-earth engineering boundary.

Interpower · IEC 60320 C5/C6 and C7/C8 engineering facts ↗
C5/C6 and C7/C8 sections · Engineering-reference scope only. V40 does not turn this source into fabrication approval, electrical safety approval, protocol guarantee, safe substitution or end-to-end compatibility proof.

SCHURTER · IEC 60320 appliance coupler overview ↗
IEC appliance-coupler overview · Engineering-reference scope only. V40 does not turn this source into fabrication approval, electrical safety approval, protocol guarantee, safe substitution or end-to-end compatibility proof.

C213Gsource checked

Exact source example 6013.0474: construction: Cordset C7 connector;black PVC moulded housing;protection class II. rating: IEC2.5A250VAC50Hz. pin temperature c: 70. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product. No physical compatibility, pin map or hardware validation is established.

SCHURTER · SCHURTER 6013.0474 — C7 cord connector source sheet ↗
PDF p.1 product photograph, two-round-lobe symbol and data; p.2 variant/mating-inlet tables and dated footer (01.09.2025). · No polarized-variant equivalence, appliance input-voltage conversion, terminal mapping or replacement-cord approval.

3 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

3 linked sources · 2 scoped claims · 0 sources with inspection/access flags.

Page scope: Original V40 engineering boundary schematic; not to scale and not a fabrication, gauging, wiring or mating-face locator drawing.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-03. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 3 source scopes, access limits and dates

S243 · IEC 60320 C5/C6 and C7/C8 engineering facts

Interpower · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Engineering scope: C5/C6 are described as three-contact grounded counterparts; C7/C8 are identified as the non-grounded Class II pair.

Not established / limitations: Engineering-reference scope only. V40 does not turn this source into fabrication approval, electrical safety approval, protocol guarantee, safe substitution or end-to-end compatibility proof.

Locator: C5/C6 and C7/C8 sections

S245 · IEC 60320 appliance coupler overview

SCHURTER · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Engineering boundary: IEC 60320 appliance couplers are treated as two-pole couplers with or without a protective conductor; V40 uses this only to avoid inventing extra contacts on non-grounded pairs.

Not established / limitations: Engineering-reference scope only. V40 does not turn this source into fabrication approval, electrical safety approval, protocol guarantee, safe substitution or end-to-end compatibility proof.

Locator: IEC appliance-coupler overview

S603 · SCHURTER 6013.0474 — C7 cord connector source sheet

SCHURTER · Manufacturer / product-owner domain · inspected 2026-10-13 · due 2027-01-11

Within inspection window

Scoped support: Named part or series only; observed document dated 1 September 2025. Product photographs/drawings, roles and scheme-labelled data; not an installed-device assessment.

Not established / limitations: No polarized-variant equivalence, appliance input-voltage conversion, terminal mapping or replacement-cord approval.

Locator: PDF p.1 product photograph, two-round-lobe symbol and data; p.2 variant/mating-inlet tables and dated footer (01.09.2025).

Trace 2 claims to their source records

C213B · P213

Interpower identifies C7/C8 as the non-grounded Class II pair; V40 normalizes that as a two-pole, no-protective-earth engineering boundary.

Claim scope: V40 engineering-reference fact only; independent human review remains pending. This claim does not approve fabrication, rewiring, substitution, electrical safety, protocol support or end-to-end compatibility.

Source links: S243 · S245 · Evidence trail → (private workspace)

C213G · P213

Exact source example 6013.0474: construction: Cordset C7 connector;black PVC moulded housing;protection class II. rating: IEC2.5A250VAC50Hz. pin temperature c: 70. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product. No physical compatibility, pin map or hardware validation is established.

Claim scope: Exact named component/family technical construction reference from the full current primary document; geometry, ratings and implementation limits do not transfer to other variants.

Source links: S603 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.