FIELD GUIDESource-led reference
Port & Cable

E212 · Contact count only

IEC 60320 C6 appliance inlet engineering reference

IEC 60320 C5/C6 grounded appliance-coupler pair; V40 publishes count/ground-presence boundary only. Current source example: Exact source example 6160.0081: construction: C6 screw-on panel inlet;turned solid pins;2.8x0.8mm quick-connect terminals;protection class I. rating: IEC2.5A250VAC50Hz;UL/CSA7A125VAC60Hz. pin temperature c: 70. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product. No physical compatibility, pin map or hardware validation is established.

Open field noteSource trail

Source checked · no independent review claimed · Fabrication approved: no

IEC 60320 C6 appliance inlet engineering boundary original orientation schematic
Original V40 engineering boundary schematic; not to scale and not a fabrication, gauging, wiring or mating-face locator drawing.

Orientation

How to read this profile

No mating-face pin numbering is published in V40; the three-contact fact is not a wiring locator.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts3S220Source-backed nominal position count: 3.
Connector roleplug (6160.0081)S602Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6160.0081. Documented role: plug. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.
Mountingpanel (Claim C212C)S602Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V144: SCHURTER 2562 series, document dated 1 October 2025 only. Identification and product data, not generic ratings, wiring instructions, device certification or a connection verdict.
ManufacturerSCHURTER (6160.0081)S602Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6160.0081. Documented role: plug. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.
Series2562 (6160.0081)S602Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6160.0081. Documented role: plug. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.
Exact part / implementation6160.0081 (6160.0081)S602Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. 6160.0081. Documented role: plug. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product.

Not recorded: Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Coupling / latch, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits
  • Contact/pole count does not establish terminal placement, conductor colors, voltage compatibility or safe substitution.
  • No fabrication dimensions, live-work procedure or device-level electrical approval is published.
Report a correction to these facts →

Unknowns stay unknown.

  • Contact/pole count does not establish terminal placement, conductor colors, voltage compatibility or safe substitution.
  • No fabrication dimensions, live-work procedure or device-level electrical approval is published.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C212Bsource checked

Interpower describes the IEC 60320 C5/C6 pair as having three contacts including a ground contact.

Interpower · IEC 60320 C5/C6 and C7/C8 engineering facts ↗
C5/C6 and C7/C8 sections · Engineering-reference scope only. V40 does not turn this source into fabrication approval, electrical safety approval, protocol guarantee, safe substitution or end-to-end compatibility proof.

C212Gsource checked

Exact source example 6160.0081: construction: C6 screw-on panel inlet;turned solid pins;2.8x0.8mm quick-connect terminals;protection class I. rating: IEC2.5A250VAC50Hz;UL/CSA7A125VAC60Hz. pin temperature c: 70. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product. No physical compatibility, pin map or hardware validation is established.

SCHURTER · SCHURTER 2562 series — C6 appliance inlet source sheet ↗
PDF p.1 photo and data; p.3 front/side component views and separate panel cutouts; p.4 terminal variants and footer (01.10.2025). · No panel-cutout template, installation method, wiring assignment, contact gauge or device safety certification.

2 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

2 linked sources · 2 scoped claims · 0 sources with inspection/access flags.

Page scope: Original V40 engineering boundary schematic; not to scale and not a fabrication, gauging, wiring or mating-face locator drawing.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-03. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 2 source scopes, access limits and dates

S243 · IEC 60320 C5/C6 and C7/C8 engineering facts

Interpower · Manufacturer / product-owner domain · inspected 2026-10-05 · due 2027-01-03

Within inspection window

Scoped support: Engineering scope: C5/C6 are described as three-contact grounded counterparts; C7/C8 are identified as the non-grounded Class II pair.

Not established / limitations: Engineering-reference scope only. V40 does not turn this source into fabrication approval, electrical safety approval, protocol guarantee, safe substitution or end-to-end compatibility proof.

Locator: C5/C6 and C7/C8 sections

S602 · SCHURTER 2562 series — C6 appliance inlet source sheet

SCHURTER · Manufacturer / product-owner domain · inspected 2026-10-13 · due 2027-01-11

Within inspection window

Scoped support: Named part or series only; observed document dated 1 October 2025. Product photographs/drawings, roles and scheme-labelled data; not an installed-device assessment.

Not established / limitations: No panel-cutout template, installation method, wiring assignment, contact gauge or device safety certification.

Locator: PDF p.1 photo and data; p.3 front/side component views and separate panel cutouts; p.4 terminal variants and footer (01.10.2025).

Trace 2 claims to their source records

C212B · P212

Interpower describes the IEC 60320 C5/C6 pair as having three contacts including a ground contact.

Claim scope: V40 engineering-reference fact only; independent human review remains pending. This claim does not approve fabrication, rewiring, substitution, electrical safety, protocol support or end-to-end compatibility.

Source links: S243 · Evidence trail → (private workspace)

C212G · P212

Exact source example 6160.0081: construction: C6 screw-on panel inlet;turned solid pins;2.8x0.8mm quick-connect terminals;protection class I. rating: IEC2.5A250VAC50Hz;UL/CSA7A125VAC60Hz. pin temperature c: 70. Full current official document text read. No numeric axes adopted from unviewed diagrams.; Cordset cable length and wire gauge are excluded from connector envelope. Pin-temperature class differs from allowed ambient operating range.; Regulatory declaration/certificate references do not prove a literal moulded approval mark on an individual product. No physical compatibility, pin map or hardware validation is established.

Claim scope: Exact named component/family technical construction reference from the full current primary document; geometry, ratings and implementation limits do not transfer to other variants.

Source links: S602 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.