FIELD GUIDESource-led reference
Port & Cable

E008 · Source-scoped pinout variants

HDMI Type-A engineering reference

A TE Standard HDMI receptacle example is 19-position. V54 uses that manufacturer evidence only for connector-form contact count; HDMI version, TMDS/FRL behavior, video modes, ARC/eARC and cable capability remain outside the count.

Open field noteSource trail

Source checked · no independent review claimed · Fabrication approved: no

HDMI Type-A engineering reference original orientation schematic
Original pinout diagram; read the exact variant and view below. Not to scale.

Orientation

How to read this profile

Contact count only; no numbered mating-face layout or fabrication geometry is reproduced.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts19S018 · S365plug and receptacle interface; nominal engineering count, not automatically positions, population or a device wiring map. plug and receptacle interface
Positions / cavity span19 (Claim C008C)S365Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Connector-form contact count supported by one manufacturer example; protocol/version capability explicitly excluded.
Contact rows2 (DellP2222H/P2422H/P2722H connected HDMI signal cable)S666Qualified exact source facts only; counterpart, mounting-acceptance, cable, port, termination and assembly context remains separately labelled in variant_notes. Exact DellP2222H/P2422H/P2722H manual RevA01 HDMI connected-cable face, not PCB/solder-side layout or every HDMI component. Quantity context: Two physical contact rows in source connected-signal-cable face.
Contact pitch1 mm manufacturer-reported centerline or mating-interface pitch (1747981-1)S365Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 1747981-1: HDMI Type-A board receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Pitch is TE’s named centerline attribute for this component, not a complete HDMI mating gauge; original count-only source scope needs explicit successor expansion.
Connector roleplug; socket; socket (1747981-1)S018 · S365 · S365Separate exact examples; retain each value’s source, role, axis and part scope. plug and receptacle interface Exact named example 1747981-1: HDMI Type-A board receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Pitch is TE’s named centerline attribute for this component, not a complete HDMI mating gauge; original count-only source scope needs explicit successor expansion.
Mountingright-angle top-mount surface-mount (1747981-1)S365Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 1747981-1: HDMI Type-A board receptacle. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Pitch is TE’s named centerline attribute for this component, not a complete HDMI mating gauge; original count-only source scope needs explicit successor expansion.
ManufacturerTE Connectivity (1747981-1)S606Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V146: Named drawing family and suffix table only. The drawing does not establish an installed port’s input/output role or HDMI feature set.
SeriesHDMI (1747981-1)S606Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V146: Named drawing family and suffix table only. The drawing does not establish an installed port’s input/output role or HDMI feature set.
Exact part / implementation1747981-1 (1747981-1)S606Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. V146: Named drawing family and suffix table only. The drawing does not establish an installed port’s input/output role or HDMI feature set.
View conventionDell manual connected-signal-cable view: odd contact numbers19 through1 run left to right above even18 through2. (Dell P2222H/P2422H/P2722H connected HDMI signal cable)S666Exact source-view examples remain separate from other roles, parts and generated schematics. Dell P2222H/P2422H/P2722H RevA01 manual explicitly labels the19-pin side of the connected signal cable. This source cable-face convention is not a PCB, solder-side or universal HDMI orientation. No assignments added.

Not recorded: Populated contacts, Dimensions / axis, Contact gender / arrangement, Coupling / latch, Keying / polarization, Shell / form, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits
  • HDMI version and supported video/audio features are not encoded by the connector silhouette.
  • No universal fabrication dimensions or product-specific signal capability are published in this profile.
  • Dell P2222H/P2422H/P2722H TMDS allocation: Dell's connected-cable mating-face drawing, p. 30: odd contacts 19→1 left to right above; even contacts 18→2 left to right below. This is the source's cable-face convention, not a PCB or solder-side drawing.
  • VLSI VS1010 ARC board HDMI0 connector-symbol allocation: Numbered HDMI0 symbol; use contact numbers. The schematic is not a mating-face drawing; cable-face orientation is cross-referenced to the Dell figure.
  • HDMI fixed-rate link (FRL) role reassignment — unverified: A numbered Type-A FRL mating-face map was not established from the retrieved datasheet.
  • Prior view context (not a source-view value): Contact count only; no numbered mating-face layout or fabrication geometry is reproduced.
Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

What the status labels mean
Confirmed
Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source
Only one underlying document, or one pass, supports this assignment.
Device-specific
Supported for the named equipment or wiring only. Check your device’s manual.
Unverified
Missing or conflicting evidence. Do not wire from this row.
Not connected
The source explicitly says NC, no contact or no pin for this wiring.
Wiring variant

Dell P2222H/P2422H/P2722H TMDS allocation

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Dell's connected-cable mating-face drawing, p. 30: odd contacts 19→1 left to right above; even contacts 18→2 left to right below. This is the source's cable-face convention, not a PCB or solder-side drawing.

  • P008 HDMI Type-A — Agree on all 19 pins — HDMI specification not public; confirmed from device manuals. Pin 14 wording varies (reserved / HEAC).
  • TMDS1204 Figure 8-10 shows D2/D1/D0/CLK paths with FRL role labels, but no numbered HDMI Type-A contact table. A numbered FRL pin map is unverified here. The drawing labels both CLK+ and CLK− destinations FRL_D3p; the negative lane-3 label is not silently corrected.
  • No primary numbered contact table for eARC or every later HDMI feature was retrieved. HEAC labels below do not establish eARC support.
HDMI Type-A engineering referenceDell's connected-cable mating-face drawing, p. 30: odd contacts 19→1 left to right above; even contacts 18→2 left to right below. This is the source's cable-face convention, not a PCB or solder-side drawing.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manual1: TMDS DATA 2+ (device_specific)12: TMDS DATA 2 SHIELD (device_specific)23: TMDS DATA 2− (device_specific)34: TMDS DATA 1+ (device_specific)45: TMDS DATA 1 SHIELD (device_specific)56: TMDS DATA 1− (device_specific)67: TMDS DATA 0+ (device_specific)78: TMDS DATA 0 SHIELD (device_specific)89: TMDS DATA 0− (device_specific)910: TMDS CLOCK+ (device_specific)1011: TMDS CLOCK SHIELD (device_specific)1112: TMDS CLOCK− (device_specific)1213: CEC (device_specific)1314: Reserved (N.C. on device) (device_specific)1415: DDC CLOCK (SCL) (device_specific)1516: DDC DATA (SDA) (device_specific)1617: DDC/CEC Ground (device_specific)1718: +5 V POWER (device_specific)1819: HOT PLUG DETECT (device_specific)19powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Dell P2222H/P2422H/P2722H TMDS allocation — source-scoped contact map
PinSignalWhat it doesStatus
1TMDS DATA 2+Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
2TMDS DATA 2 SHIELDCable screen or shield connection; check the named equipment.Device-specific
Sources
3TMDS DATA 2−Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
4TMDS DATA 1+Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
5TMDS DATA 1 SHIELDCable screen or shield connection; check the named equipment.Device-specific
Sources
6TMDS DATA 1−Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
7TMDS DATA 0+Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
8TMDS DATA 0 SHIELDCable screen or shield connection; check the named equipment.Device-specific
Sources
9TMDS DATA 0−Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
10TMDS CLOCK+Clock or clock-control connection, as named by this source.Device-specific
Sources
11TMDS CLOCK SHIELDCable screen or shield connection; check the named equipment.Device-specific
Sources
12TMDS CLOCK−Clock or clock-control connection, as named by this source.Device-specific
Sources
13CECControl, detection or configuration connection; check the source and device.Device-specific
Sources
14Reserved (N.C. on device)Reserved; no general-purpose wiring is established.Device-specific
Sources
15DDC CLOCK (SCL)Clock or clock-control connection, as named by this source.Device-specific
Sources
16DDC DATA (SDA)Signal conductor. Pair, polarity and direction follow this named wiring.Device-specific
Sources
17DDC/CEC GroundControl, detection or configuration connection; check the source and device.Device-specific
Sources
18+5 V POWERPower connection (+5 V POWER). Check the specified supply.Device-specific
Sources
19HOT PLUG DETECTControl, detection or configuration connection; check the source and device.Device-specific
Sources
Sources (1)

VLSI VS1010 ARC board HDMI0 connector-symbol allocation

View and evidence limits

Numbered HDMI0 symbol; use contact numbers. The schematic is not a mating-face drawing; cable-face orientation is cross-referenced to the Dell figure.

  • P008 HDMI Type-A — Agree on all 19 pins — HDMI specification not public; confirmed from device manuals. Pin 14 wording varies (reserved / HEAC).
  • HEAC names are verified as symbol assignments. Actual end-to-end feature support and unused nets on the evaluation board are not established by this table.
  • TMDS1204 Figure 8-10 shows D2/D1/D0/CLK paths with FRL role labels, but no numbered HDMI Type-A contact table. A numbered FRL pin map is unverified here. The drawing labels both CLK+ and CLK− destinations FRL_D3p; the negative lane-3 label is not silently corrected.
  • No primary numbered contact table for eARC or every later HDMI feature was retrieved. HEAC labels below do not establish eARC support.
HDMI Type-A engineering referenceNumbered HDMI0 symbol; use contact numbers. The schematic is not a mating-face drawing; cable-face orientation is cross-referenced to the Dell figure.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manual1: TMDS DATA 2+ (single_source)12: TMDS DATA 2 SHIELD (single_source)23: TMDS DATA 2− (single_source)34: TMDS DATA 1+ (single_source)45: TMDS DATA 1 SHIELD (single_source)56: TMDS DATA 1− (single_source)67: TMDS DATA 0+ (single_source)78: TMDS DATA 0 SHIELD (single_source)89: TMDS DATA 0− (single_source)910: TMDS CLOCK+ (single_source)1011: TMDS CLOCK SHIELD (single_source)1112: TMDS CLOCK− (single_source)1213: CEC (single_source)1314: HEAC+ (single_source)1415: DDC CLOCK (SCL) (single_source)1516: DDC DATA (SDA) (single_source)1617: DGND (single_source)1718: +5 V POWER (single_source)1819: HEAC−/H_P_D (single_source)19powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
VLSI VS1010 ARC board HDMI0 connector-symbol allocation — source-scoped contact map
PinSignalWhat it doesStatus
1TMDS DATA 2+Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
2TMDS DATA 2 SHIELDCable screen or shield connection; check the named equipment.Single source
Sources
3TMDS DATA 2−Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
4TMDS DATA 1+Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
5TMDS DATA 1 SHIELDCable screen or shield connection; check the named equipment.Single source
Sources
6TMDS DATA 1−Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
7TMDS DATA 0+Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
8TMDS DATA 0 SHIELDCable screen or shield connection; check the named equipment.Single source
Sources
9TMDS DATA 0−Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
10TMDS CLOCK+Clock or clock-control connection, as named by this source.Single source
Sources
11TMDS CLOCK SHIELDCable screen or shield connection; check the named equipment.Single source
Sources
12TMDS CLOCK−Clock or clock-control connection, as named by this source.Single source
Sources
13CECControl, detection or configuration connection; check the source and device.Single source
Sources
14HEAC+Control, detection or configuration connection; check the source and device.Single source
Sources
15DDC CLOCK (SCL)Clock or clock-control connection, as named by this source.Single source
Sources
16DDC DATA (SDA)Signal conductor. Pair, polarity and direction follow this named wiring.Single source
Sources
17DGNDControl, detection or configuration connection; check the source and device.Single source
Sources
18+5 V POWERPower connection (+5 V POWER). Check the specified supply.Single source
Sources
19HEAC−/H_P_DControl, detection or configuration connection; check the source and device.Single source
Sources
Sources (2)

HDMI fixed-rate link (FRL) role reassignment — unverified

View and evidence limits

A numbered Type-A FRL mating-face map was not established from the retrieved datasheet.

  • P008 HDMI Type-A — Agree on all 19 pins — HDMI specification not public; confirmed from device manuals. Pin 14 wording varies (reserved / HEAC).
  • No pin rows are supplied for this unresolved overlay. See unverified[] for the exact source limitation and lane-3 labeling conflict; do not copy the TMDS clock function into FRL operation.
  • TMDS1204 Figure 8-10 shows D2/D1/D0/CLK paths with FRL role labels, but no numbered HDMI Type-A contact table. A numbered FRL pin map is unverified here. The drawing labels both CLK+ and CLK− destinations FRL_D3p; the negative lane-3 label is not silently corrected.
  • No primary numbered contact table for eARC or every later HDMI feature was retrieved. HEAC labels below do not establish eARC support.
HDMI Type-A engineering referenceA numbered Type-A FRL mating-face map was not established from the retrieved datasheet.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualNumbered contacts are not yet confirmed.powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Not yet independently confirmed. No settled pin table is available for this wiring.

Sources (1)

Unknowns stay unknown.

  • HDMI version and supported video/audio features are not encoded by the connector silhouette.
  • No universal fabrication dimensions or product-specific signal capability are published in this profile.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C008Asource checked

The familiar full-size HDMI connector is Type-A; Mini and Micro HDMI use different physical forms.

C2G / Legrand · Video connector guide ↗
HD15, HDMI, HDMI Mini, HDMI Micro, DVI-D and RCA sections · The old DisplayPort technology/speed description on this page is not relied on.

C008Csource checked

TE's cited Standard HDMI receptacle is a 19-position connector example, supporting a 19-contact engineering count for the full-size HDMI form without implying HDMI version or video capability.

TE Connectivity · TE 1747981-1 Standard HDMI connector ↗
Configuration features: Standard HDMI connector; 19 positions; receptacle · A manufacturer component example supports connector-form contact count only; it does not establish HDMI version, video mode, cable capability or universal fabrication dimensions.

C800Qsource checked

Dell P2222H/P2422H/P2722H TMDS allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Dell · P2222H / P2422H / P2722H Monitor User's Guide ↗
p. 28, Pin assignments > VGA connector, 15-row table and numbered face drawing; p. 29, Pin assignments > DisplayPort connector, numbered figure and 20-row table; p. 30, Pin assignments > HDMI connector, numbered face figure and 19-row table · Source scope and unresolved evidence are preserved in the engineering variant.

C800Rsource checked

VLSI VS1010 ARC board HDMI0 connector-symbol allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Dell · P2222H / P2422H / P2722H Monitor User's Guide ↗
p. 28, Pin assignments > VGA connector, 15-row table and numbered face drawing; p. 29, Pin assignments > DisplayPort connector, numbered figure and 20-row table; p. 30, Pin assignments > HDMI connector, numbered face figure and 19-row table · Source scope and unresolved evidence are preserved in the engineering variant.

VLSI Solution · VS1010 ARC evaluation board schematic, vs1010_arc_v14 ↗
sheet 2/4 (PDF p. 2), HDMI0 / HDMI_19P_V1.4 connector symbol; sheet 2/4 (PDF p. 2), HDMI0 / HDMI_19P_V1.4 symbol, P$1–P$19 · Source scope and unresolved evidence are preserved in the engineering variant.

5 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

5 linked sources · 5 scoped claims · 0 sources with inspection/access flags.

Page scope: No V54 engineering drawing is published for this profile; the sidecar is intentionally limited to source-backed contact/interface context.

Assessment 2026-10-22 · earliest scheduled source review 2026-12-30. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 5 source scopes, access limits and dates

S018 · Video connector guide

C2G / Legrand · Manufacturer / product-owner domain · inspected 2026-10-01 · due 2026-12-30

Within inspection window

Scoped support: Narrow physical identifiers only, not historical speed or video capability descriptions.

Not established / limitations: The old DisplayPort technology/speed description on this page is not relied on.

Locator: HD15, HDMI, HDMI Mini, HDMI Micro, DVI-D and RCA sections

S365 · TE 1747981-1 Standard HDMI connector

TE Connectivity · Manufacturer / product-owner domain · inspected 2026-10-06 · due 2027-01-04

Within inspection window

Scoped support: Manufacturer example supporting the 19-position contact count for the standard/full-size HDMI connector form.

Not established / limitations: A manufacturer component example supports connector-form contact count only; it does not establish HDMI version, video mode, cable capability or universal fabrication dimensions.

Locator: Configuration features: Standard HDMI connector; 19 positions; receptacle

S666 · P2222H / P2422H / P2722H Monitor User's Guide

Dell · Manufacturer / product-owner domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 28, Pin assignments > VGA connector, 15-row table and numbered face drawing; p. 29, Pin assignments > DisplayPort connector, numbered figure and 20-row table; p. 30, Pin assignments > HDMI connector, numbered face figure and 19-row table

S667 · VS1010 ARC evaluation board schematic, vs1010_arc_v14

VLSI Solution · Unclassified publisher domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: sheet 2/4 (PDF p. 2), HDMI0 / HDMI_19P_V1.4 connector symbol; sheet 2/4 (PDF p. 2), HDMI0 / HDMI_19P_V1.4 symbol, P$1–P$19

S668 · TMDS1204 12Gbps, DC or AC-Coupled to TMDS and FRL HDMI Hybrid Redriver Datasheet

Texas Instruments · Unclassified publisher domain · inspected 2026-10-18 · due 2027-01-16

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: pp. 1 and 64, Features and Figure 8-10

Trace 5 claims to their source records

C008A · P008

The familiar full-size HDMI connector is Type-A; Mini and Micro HDMI use different physical forms.

Claim scope: Consumer identification / documented standard or product class only

Source links: S018 · Evidence trail → (private workspace)

C008C · P008

TE's cited Standard HDMI receptacle is a 19-position connector example, supporting a 19-contact engineering count for the full-size HDMI form without implying HDMI version or video capability.

Claim scope: Connector-form contact count supported by one manufacturer example; protocol/version capability explicitly excluded.

Source links: S365 · Evidence trail → (private workspace)

C800Q · P008

Dell P2222H/P2422H/P2722H TMDS allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S666 · Evidence trail → (private workspace)

C800R · P008

VLSI VS1010 ARC board HDMI0 connector-symbol allocation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S666 · S667 · Evidence trail → (private workspace)

C800S · P008

HDMI fixed-rate link (FRL) role reassignment — unverified: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S668 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.