Corning 722-series FC-PC and 740-series adapter documentation, revision 2016-11-29. Key options and ferrule material are manufacturer-series evidence, not a universal FC dimensional standard.
Source checked · no independent review claimed · Fabrication approved: no
View Exterior side viewDepiction Plug-style exteriorNot to scale · independent drawing review pending
Identification schematic only · not to scale · drawing review pending. No engineering drawing is published for this profile.
Contact count
Not asserted
Keyed optical connector family
Mating boundary
Shape is not the verdict.
A correctly matched FC connector and adapter, or an explicitly documented hybrid arrangement.
Orientation
How to read this profile
Interface identification and source-scoped construction only. No measured drawing, mirrored rear view, termination map or electrical pinout is supplied.
Source-scoped identification facts
Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.
Documented examples; not a mating drawing or compatibility approval
Connector role
optical connector subassembly (ExactCorning 732-1021-005-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 732-1021-005-B
Coupling / latch
threaded metal coupling nut (Named series/reference only, not every family part. AFL FC marketedconnector overview;not universalfamily mechanicaltolerance)S954Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. Named series/reference only, not every family part. AFL FC marketedconnector overview;not universalfamily mechanicaltolerance
Keying / polarization
fixed key (ExactCorning 732-1021-005-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 732-1021-005-B
Manufacturer
Corning (ExactCorning 732-1021-005-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 732-1021-005-B
Exact part / implementation
732-1021-005-B (ExactCorning 732-1021-005-B)S951Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. ExactCorning 732-1021-005-B
View convention
ActualAFL linked FC exterioroblique illustration inspected;not scaled andnoexactSKUassigned (Named series/reference only, not every family part. AFL FC marketedconnector overview;not universalfamily mechanicaltolerance)S954Current primary-source scoped values; named examples remain separate and unknowns are not inferred from illustrations. Named series/reference only, not every family part. AFL FC marketedconnector overview;not universalfamily mechanicaltolerance
Not recorded: Dimensions / axis, Mounting, Shell / form, Series, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.
Recorded variant and source limits
Key width, ferrule dimensions, polish, fiber type and measured loss are not established here.
An FC-ST sleeve changes the documented forms at the joint, not the optical signal or endface polish.
Corning identifies FC-PC connectors and adapters as a distinct fiber-optic connectivity family.
Corning · FC connectors and adapters ↗ FC connector and adapter overview · Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.
C203Bsource checked
Corning’s 722-series FC-PC description offers fixed or removable keys and pre-radiused zirconia ferrules.
Corning · Corning FC-PC connectors and adapters — CAH-136_AEN ↗ Pages 1 and 3: 722-series key and ferrule description; 740-series FC and hybrid FC-ST ordering table. · No universal FC key-width, ferrule-diameter, polish-conversion or loss-budget assertion. Do not use the panel-mount descriptions as mating-interface dimensions.
C203Csource checked
Corning’s 740-series ordering table includes FC-ST hybrid adapters, including 740-002N-003 with metal or ceramic sleeve options.
Corning · Corning FC-PC connectors and adapters — CAH-136_AEN ↗ Pages 1 and 3: 722-series key and ferrule description; 740-series FC and hybrid FC-ST ordering table. · No universal FC key-width, ferrule-diameter, polish-conversion or loss-budget assertion. Do not use the panel-mount descriptions as mating-interface dimensions.
C203Fsource checked
AFL lists a nominal 2.5 mm ferrule for its FC connector overview. AFL describes threadedmetal coupling nut.
AFL Hyperscale · Adapters and Connectors:Connectors ↗ Full manufacturer page: LC,SC,ST,FCsections and each directlylinked connector image; all4actual JPEGs downloaded/viewed. · Ferrule dimensions refer to AFL overview context, not universal housing/mating tolerances. Image-only latch/body observations remain labelled manufacturer illustrations; no measurements,partmarkings or performance from pixels.
C203Gsource checked
Corning OEM-064-AEN lists 732-1021-005-B as: FC single-mode subassembly, fixed key; metal housing, no boot, yellow dust cap.
Corning · AFOP FastShip Connector and Adapter Ordering Guide OEM-064-AEN ↗ Full18-page PDF text: p.5ST/FC/SC,p.6LCno-logo variants,p.9MT-RJ,p.11ST/FCsubassemblies,p.18revision. · Direct download403 and drawing/photo pixels unavailable. Table126/127micrometre ferrule-size values are not imported as outer ferrule diameters; unspecified SCboot3micrometre transcription is excluded. Table colors are exact-part descriptors, not general family marks.
4 source records support this profile. No independent engineering review or hardware validation is claimed.
Page scope: No V76 drawing added; original recognition artwork remains unchanged and is not a fabrication reference.
Assessment 2026-10-22 · earliest scheduled source review 2027-01-03. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.
Scoped support: Identifies FC-PC fiber-optic connector and adapter products as a threaded circular fiber-connector family.
Not established / limitations: Identification/reference scope only. V36 does not convert this source into a universal pinout, fabrication drawing, electrical approval or end-to-end compatibility verdict.
Scoped support: 722-series connector and 740-series adapter examples in the 2016-11-29 revision.
Not established / limitations: No universal FC key-width, ferrule-diameter, polish-conversion or loss-budget assertion. Do not use the panel-mount descriptions as mating-interface dimensions.
Locator: Pages 1 and 3: 722-series key and ferrule description; 740-series FC and hybrid FC-ST ordering table.
Scoped support: Exact named connector/subassembly construction and named no-logo option; keep each role separate.
Not established / limitations: Direct download403 and drawing/photo pixels unavailable. Table126/127micrometre ferrule-size values are not imported as outer ferrule diameters; unspecified SCboot3micrometre transcription is excluded. Table colors are exact-part descriptors, not general family marks.
Locator: Full18-page PDF text: p.5ST/FC/SC,p.6LCno-logo variants,p.9MT-RJ,p.11ST/FCsubassemblies,p.18revision.
Scoped support: AFL marketed connector-series examples: stated ferrule nominal sizes and coupling mechanisms; no exact orderableSKU.
Not established / limitations: Ferrule dimensions refer to AFL overview context, not universal housing/mating tolerances. Image-only latch/body observations remain labelled manufacturer illustrations; no measurements,partmarkings or performance from pixels.
Locator: Full manufacturer page: LC,SC,ST,FCsections and each directlylinked connector image; all4actual JPEGs downloaded/viewed.
Trace 5 claims to their source records
C203A · P203
Corning identifies FC-PC connectors and adapters as a distinct fiber-optic connectivity family.
Claim scope: V36 catalogue-expansion identification fact only; not independent technical approval, fabrication data, wiring instruction or end-to-end compatibility proof.
AFL lists a nominal 2.5 mm ferrule for its FC connector overview. AFL describes threadedmetal coupling nut.
Claim scope: AFL FC marketedconnector overview;not universalfamily mechanicaltolerance;ferrulesize is not outerhousingdimension,contactpitch or sourceimage measurement.
Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.
