E116 · Source-scoped pinout variants

DVI-I single-link connector engineering reference

Molex 0743232031 documents 23 loaded circuits in a digital/analog single-link component. Single-link population is kept separate from a full dual-link receptacle. This page publishes count-only evidence, not an invented single-link pin map.

Open field note Source trail

Source checked · no independent review claimed · Fabrication approved: no

DVI-I single-link connector — scoped DVI reference original orientation schematic — Original pinout diagram; read the exact variant and view below. Not to scale.

Contact count

23

23-circuit digital/analog single-link component example: Molex 0743232031.

Mating boundary

Shape is not the verdict.

Match the exact DVI variant and analog contact area without force. Physical fit does not prove active links, analog support or converter direction.

Orientation

How to read this profile

Count the small-contact grid separately from the blade and any surrounding analog contacts. No numbered mating-face, solder-side or PCB assignment is published for this single-link profile.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts	23S093Source naming counts the blade in the 23-pin total; do not treat the drawing as a pinout.
Positions / cavity span	23 (Claim C116C)S415Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Exact archived component example; not a measured universal connector dimension or electrical capability of an unknown device.
Connector role	socket (DIS-23PFFP-SL8001)S933Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DIS-23PFFP-SL8001. Documented role: socket. Manufacturer malformed4inch-40UNC text denotes its published nut-thread vocabulary; no thread dimension derived.; No pitch,contact-row count or outer dimensions transferred from a DVI-I dual-link part.; CatalogPDF access403; exact lineup page successfully read. Cable variants have different -20to80C range; not mixed with receptacle.
Coupling / latch	Screw thread retention; front-fastened PCB180degree receptacle; manufacturer labels4inch-40UNC nut thread (DIS-23PFFP-SL8001)S933Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DIS-23PFFP-SL8001. Documented role: socket. Manufacturer malformed4inch-40UNC text denotes its published nut-thread vocabulary; no thread dimension derived.; No pitch,contact-row count or outer dimensions transferred from a DVI-I dual-link part.; CatalogPDF access403; exact lineup page successfully read. Cable variants have different -20to80C range; not mixed with receptacle.
Manufacturer	Amphenol LTW (DIS-23PFFP-SL8001)S933Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DIS-23PFFP-SL8001. Documented role: socket. Manufacturer malformed4inch-40UNC text denotes its published nut-thread vocabulary; no thread dimension derived.; No pitch,contact-row count or outer dimensions transferred from a DVI-I dual-link part.; CatalogPDF access403; exact lineup page successfully read. Cable variants have different -20to80C range; not mixed with receptacle.
Series	DIS DVI-I single (DIS-23PFFP-SL8001)S933Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DIS-23PFFP-SL8001. Documented role: socket. Manufacturer malformed4inch-40UNC text denotes its published nut-thread vocabulary; no thread dimension derived.; No pitch,contact-row count or outer dimensions transferred from a DVI-I dual-link part.; CatalogPDF access403; exact lineup page successfully read. Cable variants have different -20to80C range; not mixed with receptacle.
Exact part / implementation	DIS-23PFFP-SL8001 (DIS-23PFFP-SL8001)S933Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DIS-23PFFP-SL8001. Documented role: socket. Manufacturer malformed4inch-40UNC text denotes its published nut-thread vocabulary; no thread dimension derived.; No pitch,contact-row count or outer dimensions transferred from a DVI-I dual-link part.; CatalogPDF access403; exact lineup page successfully read. Cable variants have different -20to80C range; not mixed with receptacle.

Not recorded: Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Mounting, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

The flat digital blade is not an invented numbered signal 25. Different vendor counts can include or exclude it.
No housing dimensions, tolerances, insertion depth, PCB layout or fabrication approval is established.
Full receptacle contact presence is not evidence that a source, cable or receiver operates both links.
Do not apply voltage or modify connector pins based on a reference table. Exact device wiring and operating requirements remain separate.
DVI 1.0 combined connector (Table 5-2) used for single-link operation: Receptacle mating face, pin 1 upper left (Figure 5-3).
Kontron ADD2-DVI-Dual card DVI-I output, digital-only single link (device-specific): Manufacturer 'Front view' sketch: pin 1 upper left, 8 upper right of array, 24 lower right; C1/C2 top, C3/C4 bottom, C5 centre.
DDWG DVI 1.0 combined connector (Table 5-2), used single-link: Receptacle face per DDWG Fig. 5-3 (p. 46); numbering by contact number.
Prior view context (not a source-view value): Count the small-contact grid separately from the blade and any surrounding analog contacts. No numbered mating-face, solder-side or PCB assignment is published for this single-link profile.

Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

Dark pinout view

What the status labels mean

Confirmed: Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source: Only one underlying document, or one pass, supports this assignment.
Device-specific: Supported for the named equipment or wiring only. Check your device’s manual.
Unverified: Missing or conflicting evidence. Do not wire from this row.
Not connected: The source explicitly says NC, no contact or no pin for this wiring.

Wiring variantDVI 1.0 combined connector (Table 5-2) used for single-link operation

DVI 1.0 combined connector (Table 5-2) used for single-link operation

View and evidence limits

Receptacle mating face, pin 1 upper left (Figure 5-3).

P116 DVI-I single-link — **Agree** on DVI 1.0 Table 5-2 — Same single-link caveat as P013. A adds the Kontron ADD2 output, a digital-only device variant with C1â€“C5 not connected.
DVI 1.0 defines no separate single-link DVI-I contact set; link #1 positions are recorded as unverified.
As for P013: DVI 1.0 is silent on whether pins 4, 5, 12, 13, 20, 21 are populated or wired on single-link DVI-I hardware.
No named manufacturer document was found that shows a single-link DVI-I port with active analog C1-C5 and N.C. second-link positions. The only device-specific variant found (Kontron) leaves the analog contacts unconnected.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

DVI 1.0 combined connector (Table 5-2) used for single-link operation — source-scoped contact map
Pin	Signal	What it does	Status
1	T.M.D.S. Data2-	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
2	T.M.D.S. Data2+	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
3	T.M.D.S. Data2/4 Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
4	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
5	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
6	DDC Clock	Clock or clock-control connection, as named by this source.	Single source Sources
7	DDC Data	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
8	Analog Vertical Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
9	T.M.D.S. Data1-	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
10	T.M.D.S. Data1+	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
11	T.M.D.S. Data1/3 Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
12	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
13	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
14	+5V Power	Power connection (+5V Power). Check the specified supply.	Single source Sources
15	Ground (return for +5V, HSync, and VSync)	Ground reference and return.	Single source Sources
16	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Single source Sources
17	T.M.D.S. Data0-	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
18	T.M.D.S. Data0+	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
19	T.M.D.S. Data0/5 Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
20	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
21	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
22	T.M.D.S. Clock Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
23	T.M.D.S. Clock+	Clock or clock-control connection, as named by this source.	Single source Sources
24	T.M.D.S. Clock-	Clock or clock-control connection, as named by this source.	Single source Sources
C1	Analog Red	Control, detection or configuration connection; check the source and device.	Single source Sources
C2	Analog Green	Wire colour for this termination: Analog Green.	Single source Sources
C3	Analog Blue	Wire colour for this termination: Analog Blue.	Single source Sources
C4	Analog Horizontal Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
C5	Analog Ground	Control, detection or configuration connection; check the source and device.	Single source Sources

Sources (1)

S683 · Digital Display Working Group (DDWG) · Digital Visual Interface (DVI)
Revision 1.0, 02 April 1999 · Section 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Section 2.6 Signal List (signal descriptions), p. 23 of 76; Sections 2.2.2.1-2.2.2.2 T.M.D.S. Link System/Monitor Requirements, p. 13 of 76

Kontron ADD2-DVI-Dual card DVI-I output, digital-only single link (d…

Kontron ADD2-DVI-Dual card DVI-I output, digital-only single link (device-specific)

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Manufacturer 'Front view' sketch: pin 1 upper left, 8 upper right of array, 24 lower right; C1/C2 top, C3/C4 bottom, C5 centre.

P116 DVI-I single-link — **Agree** on DVI 1.0 Table 5-2 — Same single-link caveat as P013. A adds the Kontron ADD2 output, a digital-only device variant with C1â€“C5 not connected.
Device-specific: a DVI-I receptacle (Molex 74320-1004 or similar) wired for single-link digital only; C1-C5, pin 8 and second-link positions are N.C.
As for P013: DVI 1.0 is silent on whether pins 4, 5, 12, 13, 20, 21 are populated or wired on single-link DVI-I hardware.
No named manufacturer document was found that shows a single-link DVI-I port with active analog C1-C5 and N.C. second-link positions. The only device-specific variant found (Kontron) leaves the analog contacts unconnected.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Kontron ADD2-DVI-Dual card DVI-I output, digital-only single link (device-specific) — source-scoped contact map
Pin	Signal	What it does	Status
1	TMDS Data 2-	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
2	TMDS Data 2+	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
3	TMDS Data 2/4 Shield	Cable screen or shield connection; check the named equipment.	Device-specific Sources
4	N.C.	Explicitly not connected in this named manufacturer implementation. Do not wire this contact.	Not connected Sources
5	N.C.	Explicitly not connected in this named manufacturer implementation. Do not wire this contact.	Not connected Sources
6	DDC Clock	Clock or clock-control connection, as named by this source.	Device-specific Sources
7	DDC Data	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
8	N.C.	Not connected or absent in this named wiring.	Not connected Sources
9	TMDS Data 1-	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
10	TMDS Data 1+	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
11	TMDS Data 1/3 Shield	Cable screen or shield connection; check the named equipment.	Device-specific Sources
12	N.C.	Explicitly not connected in this named manufacturer implementation. Do not wire this contact.	Not connected Sources
13	N.C.	Explicitly not connected in this named manufacturer implementation. Do not wire this contact.	Not connected Sources
14	+5V (55mA)	Power connection (+5V (55mA)). Check the specified supply.	Device-specific Sources
15	GND	Ground reference and return.	Device-specific Sources
16	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Device-specific Sources
17	TMDS Data 0-	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
18	TMDS Data 0+	Signal conductor. Pair, polarity and direction follow this named wiring.	Device-specific Sources
19	TMDS Data 0/5 Shield	Cable screen or shield connection; check the named equipment.	Device-specific Sources
20	N.C.	Explicitly not connected in this named manufacturer implementation. Do not wire this contact.	Not connected Sources
21	N.C.	Explicitly not connected in this named manufacturer implementation. Do not wire this contact.	Not connected Sources
22	TMDS Clock Shield	Cable screen or shield connection; check the named equipment.	Device-specific Sources
23	TMDS Clock+	Clock or clock-control connection, as named by this source.	Device-specific Sources
24	TMDS Clock-	Clock or clock-control connection, as named by this source.	Device-specific Sources
C1	N.C.	Not connected or absent in this named wiring.	Not connected Sources
C2	N.C.	Not connected or absent in this named wiring.	Not connected Sources
C3	N.C.	Not connected or absent in this named wiring.	Not connected Sources
C4	N.C.	Not connected or absent in this named wiring.	Not connected Sources
C5	N.C.	Not connected or absent in this named wiring.	Not connected Sources

Sources (1)

S742 · Kontron · ADD2-DVI-Dual User Manual
KTD-00714-F, dated 2008-11-25 · p. 8 of 9, Connector Description: DVI-I connector table (Pin No./Signal/Type/Pull Up) and 'Front view' sketch

DDWG DVI 1.0 combined connector (Table 5-2), used single-link

View and evidence limits

Receptacle face per DDWG Fig. 5-3 (p. 46); numbering by contact number.

P116 DVI-I single-link — **Agree** on DVI 1.0 Table 5-2 — Same single-link caveat as P013. A adds the Kontron ADD2 output, a digital-only device variant with C1â€“C5 not connected.
DVI 1.0 has no separate single-link DVI-I connector. The second-link pairs are inactive in single-link operation.
No manufacturer drawing or device manual was found that shows a single-link DVI-I connector or cable with contacts 4, 5, 12, 13, 20 and 21 omitted or unconnected. The two DVI-I device documents found (Apple Xserve, Euresys Picolo HD) both list the second-link pairs.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

DDWG DVI 1.0 combined connector (Table 5-2), used single-link — source-scoped contact map
Pin	Signal	What it does	Status
1	T.M.D.S. Data2-	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
2	T.M.D.S. Data2+	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
3	T.M.D.S. Data2/4 Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
4	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
5	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
6	DDC Clock	Clock or clock-control connection, as named by this source.	Single source Sources
7	DDC Data	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
8	Analog Vertical Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
9	T.M.D.S. Data1-	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
10	T.M.D.S. Data1+	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
11	T.M.D.S. Data1/3 Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
12	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
13	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
14	+5V Power	Power connection (+5V Power). Check the specified supply.	Single source Sources
15	Ground (return for +5V, HSync and VSync)	Ground reference and return.	Single source Sources
16	Hot Plug Detect	Control, detection or configuration connection; check the source and device.	Single source Sources
17	T.M.D.S. Data0-	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
18	T.M.D.S. Data0+	Signal conductor. Pair, polarity and direction follow this named wiring.	Single source Sources
19	T.M.D.S. Data0/5 Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
20	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
21	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
22	T.M.D.S. Clock Shield	Cable screen or shield connection; check the named equipment.	Single source Sources
23	T.M.D.S. Clock+	Clock or clock-control connection, as named by this source.	Single source Sources
24	T.M.D.S. Clock-	Clock or clock-control connection, as named by this source.	Single source Sources
C1	Analog Red	Control, detection or configuration connection; check the source and device.	Single source Sources
C2	Analog Green	Wire colour for this termination: Analog Green.	Single source Sources
C3	Analog Blue	Wire colour for this termination: Analog Blue.	Single source Sources
C4	Analog Horizontal Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
C5	Analog Ground	Control, detection or configuration connection; check the source and device.	Single source Sources

Sources (2)

S686 · Digital Display Working Group (DDWG) · Digital Visual Interface (DVI)
Revision 1.0, 02 April 1999 · Sec. 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Sec. 2.6 Signal List (signal descriptions, link/channel mapping), p. 23 of 76; Sec. 2.2.2, Table 2-1 Single and Dual Link Operation and Sec. 2.2.2.1-2.2.2.2 link requirements, pp. 12-13 of 76
S687 · Digital Display Working Group (document hosted by Molex via TTI) · Digital Display Working Group Delivers DVI (summary sheet)
Undated two-page summary; references DVI 1.0 · p. 2, 'Combined Connector (with micro-cross)' pin/signal table

Unknowns stay unknown.

The flat digital blade is not an invented numbered signal 25. Different vendor counts can include or exclude it.
No housing dimensions, tolerances, insertion depth, PCB layout or fabrication approval is established.
Full receptacle contact presence is not evidence that a source, cable or receiver operates both links.
Do not apply voltage or modify connector pins based on a reference table. Exact device wiring and operating requirements remain separate.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C116Csource checked

Molex’s 26 June 2015 sheet identifies 0743232031 as a digital/analog single-link DVI component with 23 circuits.

Molex · MicroCross DVI 0743232031 generated part sheet (26 June 2015) ↗
PDF p. 1: part number, digital/analog single-link description, 23 circuits. · Distributor-hosted primary manufacturer sheet. Not a current lifecycle statement, assembly drawing, universal mating tolerance or evidence of analog output from any chosen computer.

C116Dsource checked

Molex separately illustrates a digital/analog single-link cable family and notes that contact loading depends on the signal set. A single-link combined form is distinct from digital-only DVI and from a fully populated dual-link interface.

Molex · MicroCross DVI Connector System — signal interface and cable assemblies ↗
PDF p. 2: DVI-I Receptacle Connector Front View and signal roles; p. 3: single/dual-link and analog cable families; partially loaded plug note. · Archived brochure, not evidence of current availability. Plug contacts may be partially loaded for a signal set. Do not transfer full receptacle assignments to unspecified cables or PCB terminals.

C804Ysource checked

DVI 1.0 combined connector (Table 5-2) used for single-link operation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Digital Display Working Group (DDWG) · Digital Visual Interface (DVI) ↗
Section 2.6 Signal List (signal descriptions), p. 23 of 76; Section 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Section 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Section 5.2.6.1, Figure 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76; Sections 2.2.2.1-2.2.2.2 T.M.D.S. Link System/Monitor Requirements, p. 13 of 76 · Source scope and unresolved evidence are preserved in the engineering variant. Recorded original location/access note: http://www.ddwg.org/lib/dvi_10.pdf (retrieved from Internet Archive capture https://web.archive.org/web/20060630104414/http://www.ddwg.org:80/lib/dvi_10.pdf; ddwg.org no longer serves it)

C804Zsource checked

Kontron ADD2-DVI-Dual card DVI-I output, digital-only single link (device-specific): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Kontron · ADD2-DVI-Dual User Manual ↗
p. 8 of 9, Connector Description: DVI-I connector table (Pin No./Signal/Type/Pull Up) and 'Front view' sketch · Source scope and unresolved evidence are preserved in the engineering variant.

C805Asource checked

DDWG DVI 1.0 combined connector (Table 5-2), used single-link: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Digital Display Working Group (DDWG) · Digital Visual Interface (DVI) ↗
Fig. 5-1 Digital-only Receptacle Connector Mating Interface Dimensions, p. 45 of 76; Sec. 2.2.2, Table 2-1 Single and Dual Link Operation and Sec. 2.2.2.1-2.2.2.2 link requirements, pp. 12-13 of 76; Sec. 2.6 Signal List (signal descriptions, link/channel mapping), p. 23 of 76; Sec. 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Sec. 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Sec. 5.2.6.1, Fig. 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76 · Source scope and unresolved evidence are preserved in the engineering variant.

Digital Display Working Group (document hosted by Molex via TTI) · Digital Display Working Group Delivers DVI (summary sheet) ↗
p. 2, 'Combined Connector (with micro-cross)' pin/signal table; p. 2, 'Digital Only Connector' pin/signal table · Source scope and unresolved evidence are preserved in the engineering variant.

6 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

6 linked sources · 5 scoped claims · 0 sources with inspection/access flags.

Page scope: No new drawing. Existing original unnumbered artwork remains an identification illustration, not the numbered source view.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-05. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 6 source scopes, access limits and dates

S412 · MicroCross DVI Connector System — signal interface and cable assemblies

Molex · Unclassified publisher domain · inspected 2026-10-07 · due 2027-01-05

Within inspection window

Scoped support: Primary manufacturer brochure hosted by Mouser. Numbered DVI-I front view and named cable-family distinctions.

Not established / limitations: Archived brochure, not evidence of current availability. Plug contacts may be partially loaded for a signal set. Do not transfer full receptacle assignments to unspecified cables or PCB terminals.

Locator: PDF p. 2: DVI-I Receptacle Connector Front View and signal roles; p. 3: single/dual-link and analog cable families; partially loaded plug note.

S415 · MicroCross DVI 0743232031 generated part sheet (26 June 2015)

Molex · Unclassified publisher domain · inspected 2026-10-07 · due 2027-01-05

Within inspection window

Scoped support: Exact archived digital/analog single-link component example with 23 circuits; corroborates the represented DVI-I single-link contact group.

Not established / limitations: Distributor-hosted primary manufacturer sheet. Not a current lifecycle statement, assembly drawing, universal mating tolerance or evidence of analog output from any chosen computer.

Locator: PDF p. 1: part number, digital/analog single-link description, 23 circuits.

S683 · Digital Visual Interface (DVI)

Digital Display Working Group (DDWG) · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant. Recorded original location/access note: http://www.ddwg.org/lib/dvi_10.pdf (retrieved from Internet Archive capture https://web.archive.org/web/20060630104414/http://www.ddwg.org:80/lib/dvi_10.pdf; ddwg.org no longer serves it)

Locator: Section 2.6 Signal List (signal descriptions), p. 23 of 76; Section 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Section 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Section 5.2.6.1, Figure 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76; Sections 2.2.2.1-2.2.2.2 T.M.D.S. Link System/Monitor Requirements, p. 13 of 76

S686 · Digital Visual Interface (DVI)

Digital Display Working Group (DDWG) · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: Fig. 5-1 Digital-only Receptacle Connector Mating Interface Dimensions, p. 45 of 76; Sec. 2.2.2, Table 2-1 Single and Dual Link Operation and Sec. 2.2.2.1-2.2.2.2 link requirements, pp. 12-13 of 76; Sec. 2.6 Signal List (signal descriptions, link/channel mapping), p. 23 of 76; Sec. 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Sec. 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Sec. 5.2.6.1, Fig. 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76

S687 · Digital Display Working Group Delivers DVI (summary sheet)

Digital Display Working Group (document hosted by Molex via TTI) · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 2, 'Combined Connector (with micro-cross)' pin/signal table; p. 2, 'Digital Only Connector' pin/signal table

S742 · ADD2-DVI-Dual User Manual

Kontron · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 8 of 9, Connector Description: DVI-I connector table (Pin No./Signal/Type/Pull Up) and 'Front view' sketch

Trace 5 claims to their source records

C116C · P116

Molex’s 26 June 2015 sheet identifies 0743232031 as a digital/analog single-link DVI component with 23 circuits.

Claim scope: Exact archived component example; not a measured universal connector dimension or electrical capability of an unknown device.

Source links: S415 · Evidence trail → (private workspace)

C116D · P116

Claim scope: Cable-family distinction and partial-loading caveat; no inferred assembly pin mapping.

Source links: S412 · Evidence trail → (private workspace)

C804Y · P116

DVI 1.0 combined connector (Table 5-2) used for single-link operation: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S683 · Evidence trail → (private workspace)

C804Z · P116

Kontron ADD2-DVI-Dual card DVI-I output, digital-only single link (device-specific): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S742 · Evidence trail → (private workspace)

C805A · P116

DDWG DVI 1.0 combined connector (Table 5-2), used single-link: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S686 · S687 · Evidence trail → (private workspace)

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.