E326 · Source-scoped pinout variants

DVI-A connector engineering reference

Named wiring from the pinout research; connector shape alone does not establish capabilities.

Open field note Source trail

Source checked · no independent review claimed · Fabrication approved: no

DVI-A engineering reference original orientation schematic — Original pinout diagram; read the exact variant and view below. Not to scale.

Contact count

Not asserted

Source-scoped connector interface

Mating boundary

Shape is not the verdict.

Check the exact device and mating connector.

Orientation

How to read this profile

Read the exact variant view convention. Schematic layouts do not establish physical positions.

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts	17S093Source naming counts the blade in the 17-pin total; compare the manufacturer layout.
Connector role	plug (DVIVGAMM1M)S934Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DVIVGAMM1M. Documented role: plug. Productwidth41mm andheight15mm describe the cable assembly without endpoint-specific axes,so they are not counted as connector dimensions.; No active digital-to-analog conversion. Nickel plating in table and gold-contact wording in features retained as different surfaces without forcing a single finish.
Coupling / latch	Moulded cable ends with strain relief; exact DVI-A male to VGA male assembly (DVIVGAMM1M)S934Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DVIVGAMM1M. Documented role: plug. Productwidth41mm andheight15mm describe the cable assembly without endpoint-specific axes,so they are not counted as connector dimensions.; No active digital-to-analog conversion. Nickel plating in table and gold-contact wording in features retained as different surfaces without forcing a single finish.
Manufacturer	StarTech.com (DVIVGAMM1M)S934Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DVIVGAMM1M. Documented role: plug. Productwidth41mm andheight15mm describe the cable assembly without endpoint-specific axes,so they are not counted as connector dimensions.; No active digital-to-analog conversion. Nickel plating in table and gold-contact wording in features retained as different surfaces without forcing a single finish.
Series	DVI-A to VGA cable (DVIVGAMM1M)S934Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DVIVGAMM1M. Documented role: plug. Productwidth41mm andheight15mm describe the cable assembly without endpoint-specific axes,so they are not counted as connector dimensions.; No active digital-to-analog conversion. Nickel plating in table and gold-contact wording in features retained as different surfaces without forcing a single finish.
Exact part / implementation	DVIVGAMM1M (DVIVGAMM1M)S934Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. DVIVGAMM1M. Documented role: plug. Productwidth41mm andheight15mm describe the cable assembly without endpoint-specific axes,so they are not counted as connector dimensions.; No active digital-to-analog conversion. Nickel plating in table and gold-contact wording in features retained as different surfaces without forcing a single finish.

Not recorded: Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Dimensions / axis, Contact gender / arrangement, Mounting, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits

Check the exact device manual before wiring or applying power.
DVI 1.0 analog signal assignments (Table 5-2 contacts used by the analog interface): Plug face per Figure 5-6 (pin 1 upper right).
Hatteland Technology DVI-4 DVI (12+5) male to HD15 female adapter (device-specific): Male DVI face per the manufacturer drawing.
Analog signal assignments of the DDWG combined connector, as used by a DVI-A plug: Plug face per DDWG Fig. 5-6; numbering by contact number.

Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

Dark pinout view

What the status labels mean

Confirmed: Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source: Only one underlying document, or one pass, supports this assignment.
Device-specific: Supported for the named equipment or wiring only. Check your device’s manual.
Unverified: Missing or conflicting evidence. Do not wire from this row.
Not connected: The source explicitly says NC, no contact or no pin for this wiring.

Wiring variantDVI 1.0 analog signal assignments (Table 5-2 contacts used by the an…

DVI 1.0 analog signal assignments (Table 5-2 contacts used by the analog interface)

View and evidence limits

Plug face per Figure 5-6 (pin 1 upper right).

P117 DVI-A — **Agree** on the analog contacts (C1â€“C5, 8 V-sync, 15 ground) — DVI 1.0 has no DVI-A table, so neither pass could establish which numbered contacts a DVI-A plug actually populates. Pins 6, 7, 14 and 16 are unverified in B. A's Hatteland DVI-4 adapter ties pin 16 to +5 V, which conflicts with the spec's Hot Plug Detect, and leaves pin 20 unlisted. **Publish only the analog contacts as confirmed.**
DVI 1.0 has no 'DVI-A' connector table. Figure 5-6 draws the analog plug with the full 24-position array plus C1-C5, so which digital-field contacts a DVI-A plug actually carries is not established by the specification.
Neither DVI 1.0 nor a connector maker's DVI-A drawing establishing which digital-field positions (6, 7, 14, 16 and the 12-position count) a DVI-A plug carries was found.
Pin 20 is not listed anywhere in the DVI-4 table. The table names 6 digital-field contacts (6, 7, 8, 14, 15, 16) although the product is described as 12+5.
DVI 1.0 assigns DDC Clock, DDC Data, +5V and Hot Plug Detect to these pins on the combined connector, but does not state that an analog-only plug carries them.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

DVI 1.0 analog signal assignments (Table 5-2 contacts used by the analog interface) — source-scoped contact map
Pin	Signal	What it does	Status
C1	Analog Red	Control, detection or configuration connection; check the source and device.	Single source Sources
C2	Analog Green	Wire colour for this termination: Analog Green.	Single source Sources
C3	Analog Blue	Wire colour for this termination: Analog Blue.	Single source Sources
C4	Analog Horizontal Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
C5	Analog Ground	Control, detection or configuration connection; check the source and device.	Single source Sources
8	Analog Vertical Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
15	Ground (return for +5V, HSync, and VSync)	Ground reference and return.	Single source Sources

Sources (1)

S683 · Digital Display Working Group (DDWG) · Digital Visual Interface (DVI)
Revision 1.0, 02 April 1999 · Section 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Section 2.6 Signal List (signal descriptions), p. 23 of 76

Hatteland Technology DVI-4 DVI (12+5) male to HD15 female adapter (d…

Hatteland Technology DVI-4 DVI (12+5) male to HD15 female adapter (device-specific)

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Male DVI face per the manufacturer drawing.

P117 DVI-A — **Agree** on the analog contacts (C1â€“C5, 8 V-sync, 15 ground) — DVI 1.0 has no DVI-A table, so neither pass could establish which numbered contacts a DVI-A plug actually populates. Pins 6, 7, 14 and 16 are unverified in B. A's Hatteland DVI-4 adapter ties pin 16 to +5 V, which conflicts with the spec's Hot Plug Detect, and leaves pin 20 unlisted. **Publish only the analog contacts as confirmed.**
Device-specific: the vendor calls it 'DVI-I (12+5) Single Link Male'; the 12+5 analog-style contact set is used here as named-device evidence for a DVI-A plug.
The research contains rows outside its declared pin set; those extra rows are withheld.
Neither DVI 1.0 nor a connector maker's DVI-A drawing establishing which digital-field positions (6, 7, 14, 16 and the 12-position count) a DVI-A plug carries was found.
Pin 20 is not listed anywhere in the DVI-4 table. The table names 6 digital-field contacts (6, 7, 8, 14, 15, 16) although the product is described as 12+5.
DVI 1.0 assigns DDC Clock, DDC Data, +5V and Hot Plug Detect to these pins on the combined connector, but does not state that an analog-only plug carries them.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Hatteland Technology DVI-4 DVI (12+5) male to HD15 female adapter (device-specific) — source-scoped contact map
Pin	Signal	What it does	Status
C1	Analog Red	Control, detection or configuration connection; check the source and device.	Device-specific Sources
C2	Analog Green	Wire colour for this termination: Analog Green.	Device-specific Sources
C3	Analog Blue	Wire colour for this termination: Analog Blue.	Device-specific Sources
C4	Analog Horizontal Sync.	Control, detection or configuration connection; check the source and device.	Device-specific Sources
C5	Analog Ground (return for R, G, B signals)	Control, detection or configuration connection; check the source and device.	Device-specific Sources
6	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
7	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
8	Analog Vertical Sync.	Control, detection or configuration connection; check the source and device.	Device-specific Sources
14	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
15	Digital Ground (for +5V and analog sync.)	Power connection (Digital Ground (for +5V and analog sync.)). Check the specified supply.	Device-specific Sources
16	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
Shield	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources

Sources (1)

S685 · Hatteland Technology · Datasheet: Appliance cables and connectors suitable for a wide range of Hatteland Technology products (DSUB, DVI, DP, HDMI, Power, Serial, Adapters, BNC)
Revision 19, last revised 18 Sep 2024 · p. 10/19, DVI-4 'DVI-I (12+5) Single Link Male to RGB/VGA (15-pin HD D-SUB female) signal adapter', DVI MALE PIN / Description / HD15 FEMALE PIN table and male-face drawing

Analog signal assignments of the DDWG combined connector, as used by…

Analog signal assignments of the DDWG combined connector, as used by a DVI-A plug

View and evidence limits

Plug face per DDWG Fig. 5-6; numbering by contact number.

P117 DVI-A — **Agree** on the analog contacts (C1â€“C5, 8 V-sync, 15 ground) — DVI 1.0 has no DVI-A table, so neither pass could establish which numbered contacts a DVI-A plug actually populates. Pins 6, 7, 14 and 16 are unverified in B. A's Hatteland DVI-4 adapter ties pin 16 to +5 V, which conflicts with the spec's Hot Plug Detect, and leaves pin 20 unlisted. **Publish only the analog contacts as confirmed.**
DVI 1.0 does not use the name 'DVI-A'. It defines an 'analog plug' that mates with the combined receptacle.
No manufacturer drawing was retrieved: the Molex 74323-series DVI-A plug drawings timed out, and a Lindy DVI-A cable datasheet gives no pinout. TMDS positions 1-5, 9-13 and 17-24 are not recorded for DVI-A.
Pins 6, 7, 14, 15 and 16 are assigned on the combined connector, but no source here shows them present on a DVI-A plug.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Analog signal assignments of the DDWG combined connector, as used by a DVI-A plug — source-scoped contact map
Pin	Signal	What it does	Status
6	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
7	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
8	Analog Vertical Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
14	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
15	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
16	Not confirmed	No settled assignment. Do not wire from this row.	Unverified Sources
C1	Analog Red	Control, detection or configuration connection; check the source and device.	Single source Sources
C2	Analog Green	Wire colour for this termination: Analog Green.	Single source Sources
C3	Analog Blue	Wire colour for this termination: Analog Blue.	Single source Sources
C4	Analog Horizontal Sync	Control, detection or configuration connection; check the source and device.	Single source Sources
C5	Analog Ground	Control, detection or configuration connection; check the source and device.	Single source Sources

Sources (1)

S686 · Digital Display Working Group (DDWG) · Digital Visual Interface (DVI)
Revision 1.0, 02 April 1999 · Sec. 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Sec. 2.6 Signal List (signal descriptions, link/channel mapping), p. 23 of 76

Goobay 69971 DVI-A male to VGA female adapter, listedDVI-side continuity

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Manufacturer sheet 1 numbered DVI plug outline and Pin Out wiring table. Only explicit DVI contact designators are normalized. No wire-entry/termination mirror or inferred contact population is asserted.

This is an11-listed-contact partial continuity map, not a17-contact population inventory. Manufacturer advertises12+5 but does not identify all remaining positions as wired,NC or absent.
SHIELD-to-SHIELD is separately explicit evidence but not counted as a numbered mating contact or a28th new assignment.
Do not generalize this adapter continuity, especially14/16 grouping, to generic DVI-A or the different Hatteland adapter. No voltage/current/feature capability inferred.
Schematic listing only, not to scale; fabrication remains unapproved.

Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.

Goobay 69971 DVI-A male to VGA female adapter, listedDVI-side continuity — source-scoped contact map
Pin	Signal	What it does	Status
C1	VGA 1	Connected to VGA contact1 on the named 69971 adapter.	Device-specific Sources
C2	VGA 2	Connected to VGA contact2 on the named 69971 adapter.	Device-specific Sources
C3	VGA 3	Connected to VGA contact3 on the named 69971 adapter.	Device-specific Sources
C4	VGA 13	Connected to VGA contact13 on the named 69971 adapter.	Device-specific Sources
C5	VGA 6,7,8	Connected to VGA contacts6,7,8 on the named 69971 adapter.	Device-specific Sources
8	VGA 14	Connected to VGA contact14 on the named 69971 adapter.	Device-specific Sources
7	VGA 12	Connected to VGA contact12 on the named 69971 adapter.	Device-specific Sources
6	VGA 15	Connected to VGA contact15 on the named 69971 adapter.	Device-specific Sources
14	VGA 9	Manufacturer groupsDVI 14 and16 as connected to VGA 9. No independent voltage/polarity or HPD function is asserted.	Device-specific Sources
16	VGA 9	Manufacturer groupsDVI 14 and16 as connected to VGA 9. No independent voltage/polarity or HPD function is asserted.	Device-specific Sources
15	VGA 10,5	Connected to VGA contacts10,5 on the named 69971 adapter.	Device-specific Sources

Sources (1)

S884 · Wentronic GmbH / Goobay · Goobay 69971 DVI-A/VGA Monitor Adapter product drawing
Drawing 69971; drawn24.03.2023; checked12.02.2024; sheet 1 of 1 · Sheet 1, upper-left Pinbelegung/Pin Out DVI→VGA wiring table; upper-middle numberedDVI outline; lower title block

Unknowns stay unknown.

Check the exact device manual before wiring or applying power.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C805Bsource checked

DVI 1.0 analog signal assignments (Table 5-2 contacts used by the analog interface): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Digital Display Working Group (DDWG) · Digital Visual Interface (DVI) ↗
Section 2.6 Signal List (signal descriptions), p. 23 of 76; Section 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Section 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Section 5.2.6.1, Figure 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76; Sections 2.2.2.1-2.2.2.2 T.M.D.S. Link System/Monitor Requirements, p. 13 of 76 · Source scope and unresolved evidence are preserved in the engineering variant. Recorded original location/access note: http://www.ddwg.org/lib/dvi_10.pdf (retrieved from Internet Archive capture https://web.archive.org/web/20060630104414/http://www.ddwg.org:80/lib/dvi_10.pdf; ddwg.org no longer serves it)

C805Csource checked

Hatteland Technology DVI-4 DVI (12+5) male to HD15 female adapter (device-specific): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Hatteland Technology · Datasheet: Appliance cables and connectors suitable for a wide range of Hatteland Technology products (DSUB, DVI, DP, HDMI, Power, Serial, Adapters, BNC) ↗
p. 10/19, DVI-4 'DVI-I (12+5) Single Link Male to RGB/VGA (15-pin HD D-SUB female) signal adapter', DVI MALE PIN / Description / HD15 FEMALE PIN table and male-face drawing; p. 3/19, HA-SDM-2M Standard DVI-D 18+1pin Male Signal Cable (Single Link Digital), DVI-D MALE PIN / Description / DVI-D MALE PIN table · Source scope and unresolved evidence are preserved in the engineering variant.

C805Dsource checked

Analog signal assignments of the DDWG combined connector, as used by a DVI-A plug: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Digital Display Working Group (DDWG) · Digital Visual Interface (DVI) ↗
Fig. 5-1 Digital-only Receptacle Connector Mating Interface Dimensions, p. 45 of 76; Sec. 2.2.2, Table 2-1 Single and Dual Link Operation and Sec. 2.2.2.1-2.2.2.2 link requirements, pp. 12-13 of 76; Sec. 2.6 Signal List (signal descriptions, link/channel mapping), p. 23 of 76; Sec. 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Sec. 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Sec. 5.2.6.1, Fig. 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76 · Source scope and unresolved evidence are preserved in the engineering variant.

C884Asource checked

Goobay 69971 DVI-A male to VGA female adapter, listedDVI-side continuity: exact numbered manufacturer contact normalization. Device-specific source-backed research only; see per-contact source and scope.

Wentronic GmbH / Goobay · Goobay 69971 DVI-A/VGA Monitor Adapter product drawing ↗
Sheet 1, upper-left Pinbelegung/Pin Out DVI→VGA wiring table; upper-middle numberedDVI outline; lower title block · Eleven numberedDVI designators plus SHIELD are mapped; remaining advertised 12+5 positions are not established as wired/NC/absent. No generic DVI-A population, voltage, power capability, video capability or physical contact geometry inferred.

4 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

4 linked sources · 4 scoped claims · 0 sources with inspection/access flags.

Page scope: Original schematic; not to scale and not fabrication approval.

Assessment 2026-10-22 · earliest scheduled source review 2027-01-18. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 4 source scopes, access limits and dates

S683 · Digital Visual Interface (DVI)

Digital Display Working Group (DDWG) · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant. Recorded original location/access note: http://www.ddwg.org/lib/dvi_10.pdf (retrieved from Internet Archive capture https://web.archive.org/web/20060630104414/http://www.ddwg.org:80/lib/dvi_10.pdf; ddwg.org no longer serves it)

Locator: Section 2.6 Signal List (signal descriptions), p. 23 of 76; Section 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Section 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Section 5.2.6.1, Figure 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76; Sections 2.2.2.1-2.2.2.2 T.M.D.S. Link System/Monitor Requirements, p. 13 of 76

S685 · Datasheet: Appliance cables and connectors suitable for a wide range of Hatteland Technology products (DSUB, DVI, DP, HDMI, Power, Serial, Adapters, BNC)

Hatteland Technology · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 10/19, DVI-4 'DVI-I (12+5) Single Link Male to RGB/VGA (15-pin HD D-SUB female) signal adapter', DVI MALE PIN / Description / HD15 FEMALE PIN table and male-face drawing; p. 3/19, HA-SDM-2M Standard DVI-D 18+1pin Male Signal Cable (Single Link Digital), DVI-D MALE PIN / Description / DVI-D MALE PIN table

S686 · Digital Visual Interface (DVI)

Digital Display Working Group (DDWG) · Unclassified publisher domain · inspected 2026-10-20 · due 2027-01-18

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: Fig. 5-1 Digital-only Receptacle Connector Mating Interface Dimensions, p. 45 of 76; Sec. 2.2.2, Table 2-1 Single and Dual Link Operation and Sec. 2.2.2.1-2.2.2.2 link requirements, pp. 12-13 of 76; Sec. 2.6 Signal List (signal descriptions, link/channel mapping), p. 23 of 76; Sec. 5.2.1.1, Table 5-1 Digital-Only Connector Pin Assignments, p. 43 of 76; Sec. 5.2.1.2, Table 5-2 Combined Analog and Digital Connector Pin Assignments, p. 44 of 76; Sec. 5.2.6.1, Fig. 5-6 Analog Plug Connector Mating Interface Dimensions, p. 47 of 76

S884 · Goobay 69971 DVI-A/VGA Monitor Adapter product drawing

Wentronic GmbH / Goobay · Unclassified publisher domain · inspected 2026-10-22 · due 2027-01-20

Within inspection window

Scoped support: Only explicitly listed continuity mappings of named 69971 DVI-A male12+5 to VGA female15 adapter.

Not established / limitations: Eleven numberedDVI designators plus SHIELD are mapped; remaining advertised 12+5 positions are not established as wired/NC/absent. No generic DVI-A population, voltage, power capability, video capability or physical contact geometry inferred.

Locator: Sheet 1, upper-left Pinbelegung/Pin Out DVI→VGA wiring table; upper-middle numberedDVI outline; lower title block

Trace 4 claims to their source records

C805B · P117

DVI 1.0 analog signal assignments (Table 5-2 contacts used by the analog interface): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S683 · Evidence trail → (private workspace)

C805C · P117

Hatteland Technology DVI-4 DVI (12+5) male to HD15 female adapter (device-specific): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S685 · Evidence trail → (private workspace)

C805D · P117

Analog signal assignments of the DDWG combined connector, as used by a DVI-A plug: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S686 · Evidence trail → (private workspace)

C884A · P117

Claim scope: Only the named implementation and explicit numbered rows; no universal family claim, independent confirmation, hardware verification or fabrication approval.

Source links: S884 · Evidence trail → (private workspace)

Prepare this page for review →Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.