FIELD GUIDESource-led reference
Port & Cable

E021 · Source-scoped pinout variants

6.35 mm TS connector engineering reference

Physical TS contact designations only.

Open field noteSource trail

Source checked · no independent review claimed · Fabrication approved: no

6.35 mm TS contact-designation reference original orientation schematic
Original pinout diagram; read the exact variant and view below. Not to scale.

Orientation

How to read this profile

Longitudinal plug view from the exposed tip toward the cable body: Tip → Sleeve.

Bounded dimensions

Only what the sources support

Source-scoped dimensions; not fabrication clearances
FieldValueScopeEvidence
Nominal plug family diameter6.35 mmnominal identifier[C021A]

Source-scoped identification facts

Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.

Documented examples; not a mating drawing or compatibility approval
Nominal contacts2S024phone plug physical contact sequence; nominal engineering count, not automatically positions, population or a device wiring map. phone plug physical contact sequence
Dimensions / axis6.35 mm Nominal plug family diameter; 14.5 mm published shell width (NP2X)S024 · S024Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. nominal_identifier; phone plug physical contact sequence NP2X. Documented role: plug. 15.88mm jackfield pitch is connector-to-connector packing,not contact pitch.4–7mm cable acceptance excluded from connector dimensions.
Connector roleplug; plug (NP2X)S024 · S024Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. phone plug physical contact sequence NP2X. Documented role: plug. 15.88mm jackfield pitch is connector-to-connector packing,not contact pitch.4–7mm cable acceptance excluded from connector dimensions.
ManufacturerNeutrik (NP2X)S024Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NP2X. Documented role: plug. 15.88mm jackfield pitch is connector-to-connector packing,not contact pitch.4–7mm cable acceptance excluded from connector dimensions.
SeriesPlug X (NP2X)S024Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NP2X. Documented role: plug. 15.88mm jackfield pitch is connector-to-connector packing,not contact pitch.4–7mm cable acceptance excluded from connector dimensions.
Exact part / implementationNP2X (NP2X)S024Named source examples retain separate role, part, view and axis limits; values are not a universal family specification. NP2X. Documented role: plug. 15.88mm jackfield pitch is connector-to-connector packing,not contact pitch.4–7mm cable acceptance excluded from connector dimensions.
View conventionLongitudinal plug view from the exposed tip toward the cable body: Tip → Sleeve.S024Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. Existing engineering orientation text; source/part/view remains controlling.

Not recorded: Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Contact gender / arrangement, Mounting, Coupling / latch, Keying / polarization, Shell / form, Recorded markings. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.

Recorded variant and source limits
  • No instrument, speaker, insert or balanced/unbalanced device role is inferred.
  • No manufacturing tolerances are published.
  • Yamaha EMX2 LINE 5/6-9/10 and MIC/LINE 4 (Hi-Z on) unbalanced inputs: Plug contacts named tip/sleeve; no spatial face view.
  • Yamaha EMX2 SPEAKERS L/R phone outputs: Plug contacts named tip/sleeve.
  • Yamaha MG32/14FX, MG24/14FX stereo channel input jacks and RETURN 1, 2: Plug contacts named tip/sleeve.
  • Yamaha PX10/PX8/PX5/PX3 [SPEAKERS] A/B phone output (BTL amplifier): Panel legend names tip/sleeve; no face view.
  • Yamaha MG10XU/MG10X/MG10 unbalanced LINE inputs (phone jack): Contacts identified by name; local ordinals 1 = tip, 2 = sleeve. No jack lug or PCB pad numbering is implied.
  • Mackie 1202VLZ4 line inputs, unbalanced TS plug wiring: Contacts identified by name; local ordinals 1 = tip, 2 = sleeve. No jack lug or PCB pad numbering is implied.
Report a correction to these facts →

Pins & wiring

Pinout

Choose the exact wiring. Pin numbers follow its stated view; a schematic does not establish physical positions. Check your exact device before wiring.

What the status labels mean
Confirmed
Recorded research passes agree within this variant; this is not independent human review or hardware validation.
Single source
Only one underlying document, or one pass, supports this assignment.
Device-specific
Supported for the named equipment or wiring only. Check your device’s manual.
Unverified
Missing or conflicting evidence. Do not wire from this row.
Not connected
The source explicitly says NC, no contact or no pin for this wiring.
Wiring variant

Yamaha EMX2 LINE 5/6-9/10 and MIC/LINE 4 (Hi-Z on) unbalanced inputs

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Plug contacts named tip/sleeve; no spatial face view.

  • P021 6.35 mm TS — **Agree** (tip = signal/hot, sleeve = ground) — A: Yamaha EMX2, MG32 and PX. B: Yamaha MG10XU and Mackie 1202VLZ4. Speaker-output use (tip +, sleeve −) is from A only.
  • No IEC 60268-12 or other standard text for the TS phone connector was accessed; mapping is device-specific only.
  • No primary manufacturer document was retrieved in this pass for instrument, footswitch, CV/gate or other TS applications.
  • Normalling / switch contacts on TS jacks (e.g. Switchcraft or Neutrik jack datasheets) were not established.
6.35 mm TS contact-designation referencePlug contacts named tip/sleeve; no spatial face view.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualT: Signal (device_specific)TS: Ground (device_specific)SpowergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Yamaha EMX2 LINE 5/6-9/10 and MIC/LINE 4 (Hi-Z on) unbalanced inputs — source-scoped contact map
PinSignalWhat it doesStatus
TSignalControl, detection or configuration connection; check the source and device.Device-specific
Sources
SGroundGround reference and return.Device-specific
Sources
Sources (1)

Yamaha EMX2 SPEAKERS L/R phone outputs

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Plug contacts named tip/sleeve.

  • P021 6.35 mm TS — **Agree** (tip = signal/hot, sleeve = ground) — A: Yamaha EMX2, MG32 and PX. B: Yamaha MG10XU and Mackie 1202VLZ4. Speaker-output use (tip +, sleeve −) is from A only.
  • Loudspeaker-level output; table lists it as unbalanced with Tip: Positive, Sleeve: Negative.
  • No IEC 60268-12 or other standard text for the TS phone connector was accessed; mapping is device-specific only.
  • No primary manufacturer document was retrieved in this pass for instrument, footswitch, CV/gate or other TS applications.
  • Normalling / switch contacts on TS jacks (e.g. Switchcraft or Neutrik jack datasheets) were not established.
6.35 mm TS contact-designation referencePlug contacts named tip/sleeve.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualT: Positive (device_specific)TS: Negative (device_specific)SpowergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Yamaha EMX2 SPEAKERS L/R phone outputs — source-scoped contact map
PinSignalWhat it doesStatus
TPositiveControl, detection or configuration connection; check the source and device.Device-specific
Sources
SNegativeControl, detection or configuration connection; check the source and device.Device-specific
Sources
Sources (1)

Yamaha MG32/14FX, MG24/14FX stereo channel input jacks and RETURN 1, 2

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Plug contacts named tip/sleeve.

  • P021 6.35 mm TS — **Agree** (tip = signal/hot, sleeve = ground) — A: Yamaha EMX2, MG32 and PX. B: Yamaha MG10XU and Mackie 1202VLZ4. Speaker-output use (tip +, sleeve −) is from A only.
  • No IEC 60268-12 or other standard text for the TS phone connector was accessed; mapping is device-specific only.
  • No primary manufacturer document was retrieved in this pass for instrument, footswitch, CV/gate or other TS applications.
  • Normalling / switch contacts on TS jacks (e.g. Switchcraft or Neutrik jack datasheets) were not established.
6.35 mm TS contact-designation referencePlug contacts named tip/sleeve.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualT: Hot (device_specific)TS: Ground (device_specific)SpowergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Yamaha MG32/14FX, MG24/14FX stereo channel input jacks and RETURN 1, 2 — source-scoped contact map
PinSignalWhat it doesStatus
THotControl, detection or configuration connection; check the source and device.Device-specific
Sources
SGroundGround reference and return.Device-specific
Sources
Sources (1)

Yamaha PX10/PX8/PX5/PX3 [SPEAKERS] A/B phone output (BTL amplifier)

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Panel legend names tip/sleeve; no face view.

  • P021 6.35 mm TS — **Agree** (tip = signal/hot, sleeve = ground) — A: Yamaha EMX2, MG32 and PX. B: Yamaha MG10XU and Mackie 1202VLZ4. Speaker-output use (tip +, sleeve −) is from A only.
  • The PX uses BTL output stages: the sleeve is the inverted (NEG) output, not ground. The panel warns 'DO NOT CONNECT ANY OUTPUT TO GROUND'. Reference Manual p. 9 NOTICE also describes the BTL design.
  • No IEC 60268-12 or other standard text for the TS phone connector was accessed; mapping is device-specific only.
  • No primary manufacturer document was retrieved in this pass for instrument, footswitch, CV/gate or other TS applications.
  • Normalling / switch contacts on TS jacks (e.g. Switchcraft or Neutrik jack datasheets) were not established.
6.35 mm TS contact-designation referencePanel legend names tip/sleeve; no face view.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manualT: POS (device_specific)TS: NEG (inverted output) (device_specific)SpowergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Yamaha PX10/PX8/PX5/PX3 [SPEAKERS] A/B phone output (BTL amplifier) — source-scoped contact map
PinSignalWhat it doesStatus
TPOSControl, detection or configuration connection; check the source and device.Device-specific
Sources
SNEG (inverted output)Control, detection or configuration connection; check the source and device.Device-specific
Sources
Sources (1)

Yamaha MG10XU/MG10X/MG10 unbalanced LINE inputs (phone jack)

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Contacts identified by name; local ordinals 1 = tip, 2 = sleeve. No jack lug or PCB pad numbering is implied.

  • P021 6.35 mm TS — **Agree** (tip = signal/hot, sleeve = ground) — A: Yamaha EMX2, MG32 and PX. B: Yamaha MG10XU and Mackie 1202VLZ4. Speaker-output use (tip +, sleeve −) is from A only.
  • Loudspeaker-level TS outputs (e.g. Yamaha PX series 'Phones output jack' speaker terminals listed in YAM-PX10 p. 2), instrument outputs, footswitch/expression contacts and insert-tip-only wiring were not established pin by pin from a primary document in this pass.
  • Normalling/switch lugs on TS jacks are manufacturer-part-specific; no Switchcraft/Neutrik/Rean jack drawing was read in this pass.
6.35 mm TS contact-designation referenceContacts identified by name; local ordinals 1 = tip, 2 = sleeve. No jack lug or PCB pad numbering is implied.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manual1: Tip = Signal (device_specific)12: Sleeve = Ground (device_specific)2powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Yamaha MG10XU/MG10X/MG10 unbalanced LINE inputs (phone jack) — source-scoped contact map
PinSignalWhat it doesStatus
1Tip = SignalControl, detection or configuration connection; check the source and device.Device-specific
Sources
2Sleeve = GroundControl, detection or configuration connection; check the source and device.Device-specific
Sources
Sources (1)

Mackie 1202VLZ4 line inputs, unbalanced TS plug wiring

Device-specific wiring. Check your device’s manual before connecting or applying power.

View and evidence limits

Contacts identified by name; local ordinals 1 = tip, 2 = sleeve. No jack lug or PCB pad numbering is implied.

  • P021 6.35 mm TS — **Agree** (tip = signal/hot, sleeve = ground) — A: Yamaha EMX2, MG32 and PX. B: Yamaha MG10XU and Mackie 1202VLZ4. Speaker-output use (tip +, sleeve −) is from A only.
  • Loudspeaker-level TS outputs (e.g. Yamaha PX series 'Phones output jack' speaker terminals listed in YAM-PX10 p. 2), instrument outputs, footswitch/expression contacts and insert-tip-only wiring were not established pin by pin from a primary document in this pass.
  • Normalling/switch lugs on TS jacks are manufacturer-part-specific; no Switchcraft/Neutrik/Rean jack drawing was read in this pass.
6.35 mm TS contact-designation referenceContacts identified by name; local ordinals 1 = tip, 2 = sleeve. No jack lug or PCB pad numbering is implied.SCHEMATIC · physical positions unconfirmedNot to scale · check the named wiring and device manual1: Tip = Positive (+ or hot) (device_specific)12: Sleeve = Shield or ground (device_specific)2powergrounddataConfigshieldNCUnknown
Schematic only · physical contact positions unconfirmed. Original drawing · not to scale. Scroll sideways if needed.
Mackie 1202VLZ4 line inputs, unbalanced TS plug wiring — source-scoped contact map
PinSignalWhat it doesStatus
1Tip = Positive (+ or hot)Control, detection or configuration connection; check the source and device.Device-specific
Sources
2Sleeve = Shield or groundCable screen or shield connection; check the named equipment.Device-specific
Sources
Sources (1)

Unknowns stay unknown.

  • No instrument, speaker, insert or balanced/unbalanced device role is inferred.
  • No manufacturing tolerances are published.

Your next step

Use the detail without guessing past its limits.

Read the connector field note Recognition clues and practical checks.Work through a connection Keep exact equipment and cable requirements separate.

Source trail

Claims and sources

C802Dsource checked

Yamaha EMX2 LINE 5/6-9/10 and MIC/LINE 4 (Hi-Z on) unbalanced inputs: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Yamaha · EMX2 Technical Specifications (emx2_en_ts_b0.pdf) ↗
p. 2, 'Jack and Plug List' table (Jack / Polarity / Balanced-Unbalanced / Configuration), TS phone plug rows; p. 2, 'Jack and Plug List' table, TRS phone plug rows · Source scope and unresolved evidence are preserved in the engineering variant.

C802Esource checked

Yamaha EMX2 SPEAKERS L/R phone outputs: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Yamaha · EMX2 Technical Specifications (emx2_en_ts_b0.pdf) ↗
p. 2, 'Jack and Plug List' table (Jack / Polarity / Balanced-Unbalanced / Configuration), TS phone plug rows; p. 2, 'Jack and Plug List' table, TRS phone plug rows · Source scope and unresolved evidence are preserved in the engineering variant.

C802Fsource checked

Yamaha MG32/14FX, MG24/14FX stereo channel input jacks and RETURN 1, 2: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Yamaha · MG32/14FX, MG24/14FX Mixing Console Owner's Manual (English) ↗
p. 21, 'Connector Polarities' figure; p. 21, 'Connector Polarities' figure (Front & Rear Panels section); p. 4, precautions page: 'Insert TRS phone jacks are wired as follows: sleeve: ground, tip: send, and ring: return.' · Source scope and unresolved evidence are preserved in the engineering variant.

C802Gsource checked

Yamaha PX10/PX8/PX5/PX3 [SPEAKERS] A/B phone output (BTL amplifier): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Yamaha · PX10/PX8/PX5/PX3 Reference Manual (English) ↗
p. 11, 'Speaker connection' > 'speakON connector', Channel A and Channel B tables (Neutrik NL4 vs PX amplifier); p. 9, 'Rear panel' illustration, [SPEAKERS] A/B panel legends 'TIP POS / SLEEVE NEG' and 'NEG: INVERTED OUTPUT'; p. 9, item 16 [INPUT] A/B connectors, 'Phone jack - Balanced TRS phone jack' polarity drawing · Source scope and unresolved evidence are preserved in the engineering variant.

C802Hsource checked

Yamaha MG10XU/MG10X/MG10 unbalanced LINE inputs (phone jack): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Yamaha · MG10XU/MG10X/MG10 Mixing Console Technical Specifications ↗
p. 1, Analog Input Characteristics table, LINE 5/6, 7/8 and LINE 9/10 rows, footnote *3; p. 1, Analog Output Characteristics table, STEREO OUT / MONITOR OUT / AUX (FX) SEND rows, footnote *2 ('Tip = Hot, Ring = Cold, Sleeve = Ground') · Source scope and unresolved evidence are preserved in the engineering variant.

C802Isource checked

Mackie 1202VLZ4 line inputs, unbalanced TS plug wiring: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Mackie (LOUD Audio) · 1202VLZ4 12-Channel Compact Mixer Owner's Manual ↗
p. 11, Channel Insert description and TRS plug drawing (tip = SEND to processor, ring = RETURN from processor); p. 11, item 12 'Headphones Out', wiring list; p. 21, Appendix B, 'Balanced 1/4" TRS Connector' and 'Balanced mono circuits' bullet; p. 21, Appendix B, 'Stereo Headphones...' bullet; p. 21, Appendix B, 'Unbalanced 1/4" TS Connector'; p. 21, Appendix B, 'Unbalanced send/return circuits' bullet; p. 8, item 2 'Line Ins (Channels 1-4)', balanced TRS wiring list; p. 8, item 2 'Line Ins (Channels 1-4)', unbalanced TS wiring list · Source scope and unresolved evidence are preserved in the engineering variant.

6 source records support this profile. No independent engineering review or hardware validation is claimed.

Evidence behind this page

Scope first. Source second. Approval separate.

6 linked sources · 7 scoped claims · 0 sources with inspection/access flags.

Page scope: Original longitudinal contact-designation schematic; not to scale.

Assessment 2026-10-22 · earliest scheduled source review 2026-12-30. This is a recorded-date assessment, not a live source check. Page-level independent review is not established by this panel.

Inspect 6 source scopes, access limits and dates

S024 · NP2X phone plug

Neutrik · Manufacturer / product-owner domain · inspected 2026-10-01 · due 2026-12-30

Within inspection window

Scoped support: 1/4-inch 2-pole plug physical example.

Not established / limitations:

Locator: Technical information

S702 · EMX2 Technical Specifications (emx2_en_ts_b0.pdf)

Yamaha · Manufacturer / product-owner domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 2, 'Jack and Plug List' table (Jack / Polarity / Balanced-Unbalanced / Configuration), TS phone plug rows; p. 2, 'Jack and Plug List' table, TRS phone plug rows

S703 · MG32/14FX, MG24/14FX Mixing Console Owner's Manual (English)

Yamaha · Manufacturer / product-owner domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 21, 'Connector Polarities' figure; p. 21, 'Connector Polarities' figure (Front & Rear Panels section); p. 4, precautions page: 'Insert TRS phone jacks are wired as follows: sleeve: ground, tip: send, and ring: return.'

S704 · PX10/PX8/PX5/PX3 Reference Manual (English)

Yamaha · Manufacturer / product-owner domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 11, 'Speaker connection' > 'speakON connector', Channel A and Channel B tables (Neutrik NL4 vs PX amplifier); p. 9, 'Rear panel' illustration, [SPEAKERS] A/B panel legends 'TIP POS / SLEEVE NEG' and 'NEG: INVERTED OUTPUT'; p. 9, item 16 [INPUT] A/B connectors, 'Phone jack - Balanced TRS phone jack' polarity drawing

S705 · MG10XU/MG10X/MG10 Mixing Console Technical Specifications

Yamaha · Manufacturer / product-owner domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 1, Analog Input Characteristics table, LINE 5/6, 7/8 and LINE 9/10 rows, footnote *3; p. 1, Analog Output Characteristics table, STEREO OUT / MONITOR OUT / AUX (FX) SEND rows, footnote *2 ('Tip = Hot, Ring = Cold, Sleeve = Ground')

S706 · 1202VLZ4 12-Channel Compact Mixer Owner's Manual

Mackie (LOUD Audio) · Unclassified publisher domain · inspected 2026-10-21 · due 2027-01-19

Within inspection window

Scoped support: Exact named pinout variant only; not capability or compatibility approval.

Not established / limitations: Source scope and unresolved evidence are preserved in the engineering variant.

Locator: p. 11, Channel Insert description and TRS plug drawing (tip = SEND to processor, ring = RETURN from processor); p. 11, item 12 'Headphones Out', wiring list; p. 21, Appendix B, 'Balanced 1/4" TRS Connector' and 'Balanced mono circuits' bullet; p. 21, Appendix B, 'Stereo Headphones...' bullet; p. 21, Appendix B, 'Unbalanced 1/4" TS Connector'; p. 21, Appendix B, 'Unbalanced send/return circuits' bullet; p. 8, item 2 'Line Ins (Channels 1-4)', balanced TRS wiring list; p. 8, item 2 'Line Ins (Channels 1-4)', unbalanced TS wiring list

Trace 7 claims to their source records

C021A · P021

The 6.35 mm TS phone plug has two conductive sections.

Claim scope: Consumer identification / documented standard or product class only

Source links: S024 · Evidence trail → (private workspace)

C802D · P021

Yamaha EMX2 LINE 5/6-9/10 and MIC/LINE 4 (Hi-Z on) unbalanced inputs: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S702 · Evidence trail → (private workspace)

C802E · P021

Yamaha EMX2 SPEAKERS L/R phone outputs: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S702 · Evidence trail → (private workspace)

C802F · P021

Yamaha MG32/14FX, MG24/14FX stereo channel input jacks and RETURN 1, 2: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S703 · Evidence trail → (private workspace)

C802G · P021

Yamaha PX10/PX8/PX5/PX3 [SPEAKERS] A/B phone output (BTL amplifier): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S704 · Evidence trail → (private workspace)

C802H · P021

Yamaha MG10XU/MG10X/MG10 unbalanced LINE inputs (phone jack): original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S705 · Evidence trail → (private workspace)

C802I · P021

Mackie 1202VLZ4 line inputs, unbalanced TS plug wiring: original contact normalization. Statuses distinguish comparison agreement, source limits and named-device wiring.

Claim scope: Pinout variant only; see comparison and per-contact status. Not fabrication approval.

Source links: S706 · Evidence trail → (private workspace)

Prepare this page for review → (private workspace)Read the evidence method →

Recorded evidence only. An inspection date, publisher label, source link or generated packet is not independent technical review, hardware testing, fabrication approval or a compatibility verdict.