Connection question / Audio and fiber
Can I connect LC fiber to SC fiber?
Exact equipment requirements apply.
FromLC fiber
ConditionalPassive optical jumper direction is not fixed by connector forms.
ToSC fiber
The answer
Short answer Physically yes, with an LC-to-SC jumper. The fiber type, polish, wavelength and equipment must also match for a working link.
What you need
The cable or adapter class
- Passive optical jumper direction is not fixed by connector forms.
- Equipment direction and end-to-end Tx/Rx mapping are not resolved by a passive optical reference or by selecting its connector ends. Read the separate polarity field.
Before you buy
What must be true
- Optical path capability depends on fiber type/polish/system.
- No protocol, data rate, wavelength or complete link budget is assigned. Resolve exact transceivers and the entire optical path.
Watch out
Direction and exact products matter
Connectors that fit do not prove a connection works. Check that the exact cable or adapter is documented for LC fiber → SC fiber, and that both devices support what you need.
Identify the ends
The connectors
Evidence
Where this answer comes from
Cable and adapter profiles: CA020, CA038.
S370CorningCorning PGS176 — Single Mode Optical Fiber Jumper Assemblies with LC or SC ConnectorsS433Vericom Global SolutionsVGS Single Mode Simplex Fiber Optic Patch Cords — REV.20260128.8
Independent review pending. This page summarizes documented requirements; it is not a compatibility guarantee.