The useful distinction
Understand the requirement.
Join pro-audio equipment whose manuals specify compatible balanced TRS connections. [C994A]
Bounded facts, visible unknowns
Specifications and limits
| Documented task / mode | Named series is intended for balanced phone-jack audio interconnection. It does not establish a stereo headphone or headset microphone mapping. [C994A] |
|---|---|
| Construction / length | 24AWG ×2 oxygen-free copper with 90% OFC spiral shield and REAN TRS plugs. A named series, no selected length in the inspected page. Select the exact SKU/length and endpoint conditions; no universal analog-audio reach is asserted. [C994A] |
| Verified device list | Not included. Check exact device and accessory documentation. |
24AWG ×2 oxygen-free copper with 90% OFC spiral shield and REAN TRS plugs. Touring/live-sound use is described; no wet-location, burial or building-route approval is established.
Before you connect
What to check
- Read the jack's signal assignment and level, choose the exact length, and keep headphones, line, instrument and speaker roles separate.
- Check condition with power disconnected where the equipment guidance permits; stop for damage, heat or unknown powered connections.
- Keep published source support separate from physical test results.
Direction and fallback
The passive cable is an interconnect between documented balanced phone-jack output/input roles; the source/destination is set by equipment. An unbalanced endpoint or insert jack needs its own wiring guidance; a TRS shell does not force balanced operation.
Worked selection example
A balanced line output into a documented balanced line input is the intended class of use; verify nominal level, input range and wiring in both equipment manuals.
What to observe next
Read the jack's signal assignment and level, choose the exact length, and keep headphones, line, instrument and speaker roles separate.
Your next step
Move from the form to the requirement.
The source trail
Evidence for this page
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
Named series is intended for balanced phone-jack audio interconnection. It does not establish a stereo headphone or headset microphone mapping. Speaker-power delivery and phantom-power applicability are not established; do not use it as a power-amplifier-to-passive-speaker lead by plug similarity. 24AWG ×2 oxygen-free copper with 90% OFC spiral shield and REAN TRS plugs. A named series, no selected length in the inspected page. Select the exact SKU/length and endpoint conditions; no universal analog-audio reach is asserted.
Hosa · HSS-000 Pro Balanced Interconnect ↗S1112: full source recordInspect review dependencies →