The useful distinction
Understand the requirement.
Carry a documented HDMI display/audio path across a long conference-room or signage run. [C982A]
Bounded facts, visible unknowns
Specifications and limits
| Documented task / mode | No general-purpose USB peripheral-data path is represented. [C982A] |
|---|---|
| Construction / length | Hybrid fiber/copper active optical HDMI cable with LSZH jacket; active circuitry does not make it an HDMI-to-DisplayPort converter. The technical table gives 30m; marketing elsewhere says 100ft/30.5m. Treat this as the named 30m SKU and preserve the discrepancy. [C982A] |
| Verified device list | Not included. Check exact device and accessory documentation. |
Hybrid fiber/copper active optical HDMI cable with LSZH jacket; active circuitry does not make it an HDMI-to-DisplayPort converter. LSZH describes jacket properties; it is not evidence that this assembly is approved for every wall, ceiling or country.
Before you connect
What to check
- Record source/output port, display/input port and exact requested timing/color/HDR combination; inspect the Display label and compare with a suitable short direct cable if the long path fails.
- Check condition with power disconnected where the equipment guidance permits; stop for damage, heat or unknown powered connections.
- Keep published source support separate from physical test results.
Direction and fallback
The connector labelled Display goes to the TV, monitor or projector. Install in that orientation before closing a route. The sheet states compatibility with older HDMI devices; it does not establish every timing, VRR combination or converter chain.
Worked selection example
For a source and display whose manuals support the same 4K60 HDMI mode, connect Source → 30m AOC → Display. Power the display separately; validate mode negotiation before concealing the run.
What to observe next
Record source/output port, display/input port and exact requested timing/color/HDR combination; inspect the Display label and compare with a suitable short direct cable if the long path fails.
Your next step
Move from the form to the requirement.
The source trail
Evidence for this page
AI-assisted inspection is not independent engineering review. Source scope and access limitations are disclosed below. Procedural checklists are editorial requirements, not hardware measurements.
No general-purpose USB peripheral-data path is represented. Internal amplification is HDMI bus-powered; no external supply is required by the sheet. This does not power the monitor. Hybrid fiber/copper active optical HDMI cable with LSZH jacket; active circuitry does not make it an HDMI-to-DisplayPort converter. The technical table gives 30m; marketing elsewhere says 100ft/30.5m. Treat this as the named 30m SKU and preserve the discrepancy.
StarTech.com · HD2MM30MAO datasheet ↗S1102: full source recordInspect review dependencies →