Applies to: Primary manufacturer performance example; no VNA or RF-power test.
Named manufacturer example
AmphenolCIT's SS-10259-052024 describes its0.047in flexible coax assemblies with1.00mm male connectors. The assembly specification gives50±1Ω. It separately shows measured35cm assemblies and lists a31cm orderable assembly, TM4SM1MS1MS0031.
1.00mm Precision RF Interconnect Solutions DC–110GHzTwo source-scoped loss readings
In the35cm column, the manufacturer's insertion-loss-variation table reports-1.59dB at2GHz and-4.15dB at40GHz. These are the source's signed example values for that construction and length; they are not measurements made here or guaranteed limits for the31cm orderable SKU. No value is interpolated for another frequency.
1.00mm Precision RF Interconnect Solutions DC–110GHzComplete selection enquiry
Declare the two equipment ports, compatible1.00mm female interface, required50Ω path, selected assembly length and operating frequency. The source lists board-jack examples such as TMB-E1F2-1L1 within the solution, but an exact mating/interface drawing and RF-power conditions must still be checked before use. No energized probing or board assembly is taught here.
1.00mm Precision RF Interconnect Solutions DC–110GHzContrast that changes the decision
The source's board-connector insertion loss is explicitly de-embedded connector loss. It cannot be assigned to the full cable. Likewise, the AmphenolRF305mmRG316SMA example is a different construction whose loss remains unknown; do not borrow the1mm-family values.
1.00mm Precision RF Interconnect Solutions DC–110GHzYour next useful observation
Record the exact model, selected length, both endpoint roles and required application. Keep undocumented properties unknown.
Keep these limits
- Source-scoped examples only. No actual cable sample, link, power, qualification or certification test was performed.
Source documents, revisions and inspection methods
1.00mm Precision RF Interconnect Solutions DC–110GHz
Amphenol CIT · SS-10259-052024; ©2024, four-page sheet
pp.2–3: 0.047in assembly specifications; measured35cm example; insertion-loss-versus-length table; orderable31cm assembly and 1mm board-jack list
Inspected 2026-10-23 by public_pdf_text. AI primary manufacturer PDF text inspection; no measurement by this run
Manufacturer's named precision1mm assembly family and separate length/frequency examples. The31cm orderable SKU must not inherit35cm table values; connector-only loss must not become assembly loss.
Read the original sourceSource-documented education. Hardware behavior and independent human review have not been performed for these examples.