C028Asource checked
A barrel connector description needs outer diameter, inner diameter and mating length; polarity is a separate requirement.
E028 · No electrical assignment published
5.5 x 2.1 mm barrel connector: identification only engineering reference
Nominal outer/inner diameter identification only, not an electrical replacement approval.
Source checked · no independent review claimed · Fabrication approved: no
Orientation
How to read this profile
Cross-sectional identification schematic labels only outer and inner nominal diameters; no polarity is drawn.
Bounded dimensions
Only what the sources support
Source-scoped identification facts
Each value retains its exact example, role and measurement axis. Facts from different parts must not be combined into an invented component.
| Dimensions / axis | 5.5 mm Nominal outer diameter; 2.1 mm Nominal inner diameter; 10 ± 0.5 mm Exposed barrel length (Tensility 10-02319 / component 50-00540); 12 ± 0.5 mm Exposed barrel length (Tensility 55-00051)S031 · S473 · S485Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. nominal_identifier; coaxial DC barrel identification reference Drawing-specific distinction; no dimension is approved for fabrication. A separate example from the earlier 10-02319 assembly. Matching nominal diameters do not make their documented exposed lengths equal. |
|---|---|
| Connector role | plug (Tensility 10-02319)S473Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. This assembly only; appearance does not identify an unknown barrel. |
| Mounting | right-angle molded cable assembly (10-02319 / 50-00540)S473Separate exact examples; retain each value’s source, role, axis and part scope. Exact named example 10-02319 / 50-00540: Right-angle5.5x2.1mm barrel cable-end example. Exact example only; no universal geometry, electrical compatibility, fabrication approval or wiring instruction. Wire colors do not establish energised polarity. Exposed10mmbarrel and23mm component-body descriptions are distinct axes; existing dimensions retained. |
| Manufacturer | Tensility (10-02319 / 50-00540)S473Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. This assembly only; appearance does not identify an unknown barrel. |
| Series | DC barrel (10-02319 / 50-00540)S473Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. This assembly only; appearance does not identify an unknown barrel. |
| Exact part / implementation | 10-02319 / 50-00540 (10-02319 / 50-00540)S473Recorded source-scoped values; named examples do not describe every family variant or establish compatibility. This assembly only; appearance does not identify an unknown barrel. |
Not recorded: Nominal contacts, Positions / cavity span, Populated contacts, Contact rows, Contact pitch, Contact gender / arrangement, Coupling / latch, Keying / polarization, Shell / form, Recorded markings, View convention. Unknown fields stay unknown; illustrations supply no measurements or pin assignments.
Recorded variant and source limits
- Mating length is not established for the generic record.
- Polarity, voltage, current, connector tolerances and replacement approval remain unknown until the exact device and supply are documented.
- Prior view context (not a source-view value): Cross-sectional identification schematic labels only outer and inner nominal diameters; no polarity is drawn.
Unknowns stay unknown.
- Mating length is not established for the generic record.
- Polarity, voltage, current, connector tolerances and replacement approval remain unknown until the exact device and supply are documented.
Your next step
Use the detail without guessing past its limits.
Source trail